Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
ADM PERFORMANCE
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Technical Camaro Topics > Suspension / Brakes / Chassis

Suspension / Brakes / Chassis All suspension, brakes and chassis discussions.

Reply
 
Thread Tools
Old 02-01-2011, 10:40 PM   #1
Cali_Camaro_SS

 
Cali_Camaro_SS's Avatar
 
Drives: 2010 Camaro 1SS (BLACK)
Join Date: Jan 2010
Location: Cali
Posts: 768
Question for Pfadts

So here is the alignment, I think everything looks ok but maybe the rear left toe needs a little adjustment. and is the front camber ok at 6.5 or do I need to readjust that?
Attached Images
 
__________________
_________________
1SS: Dnyatech LT Headers | Dynamaxx CatBack | Diablo Tune | Intake | Pfatds Springs | Heritage Grill | Blacked out Bezels | Black Chevy Sign | Blacked out Wheels | Tint | HIDs w/Error code Eliminator | Green Dome/Trunk Light |

Cali_Camaro_SS is offline   Reply With Quote
Old 02-02-2011, 11:29 AM   #2
CyberPredator
50 Shades of Prey
 
Drives: TT/SS
Join Date: Oct 2010
Location: Between 10 and 20 PSI
Posts: 709
That's caster at 6.5, which is fine. if it were camber No it would not be fine
__________________
Futral Motorsports built and tuned
CyberPredator is offline   Reply With Quote
Old 02-02-2011, 12:38 PM   #3
PfadtRacing
 
PfadtRacing's Avatar
 
Drives: 2010 Camaro, 2006 Z06
Join Date: Feb 2009
Location: SLC, UT
Posts: 3,375
Overall, everything is certainly ok with those numbers. The toe up front is a little on the conservative side, but obviously nothing wrong with that. Caster is perfect at 6.5 left to right. The spread being 0 is optimal.

It would be optimal and ideal to have identical camber values in the right and left rear, but not mandatory to the point where the car will not function properly. Overall, I think you are set.
PfadtRacing is offline   Reply With Quote
Old 02-02-2011, 10:38 PM   #4
Cali_Camaro_SS

 
Cali_Camaro_SS's Avatar
 
Drives: 2010 Camaro 1SS (BLACK)
Join Date: Jan 2010
Location: Cali
Posts: 768
Cool, thanks a lot for the reply. I'll drive it for about a week or 2 and pull back in and recheck it and prolly set the rears better then but thank you again!!!
__________________
_________________
1SS: Dnyatech LT Headers | Dynamaxx CatBack | Diablo Tune | Intake | Pfatds Springs | Heritage Grill | Blacked out Bezels | Black Chevy Sign | Blacked out Wheels | Tint | HIDs w/Error code Eliminator | Green Dome/Trunk Light |

Cali_Camaro_SS is offline   Reply With Quote
Old 02-11-2011, 02:04 AM   #5
Buffnshine
So Cal Camaro5 Race Team
 
Buffnshine's Avatar
 
Drives: '10 SS/RS, '06 HHR, '70 El Camino
Join Date: Sep 2009
Location: Huntington Beach, CA
Posts: 2,629
[QUOTE=Cali_Camaro_SS;2797407]Cool, thanks a lot for the reply. I'll drive it for about a week or 2 and pull back in and recheck it and prolly set the rears better then but thank you again!!![/QUOT

who did your install and alignment?
__________________
TEAM L99 - So Cal Camaro5 Race Team #27
9/5/09 Purchased #36962 Black 1SS/RS L99 "E-TCKT" Base Dyno 328hp/341tq @BBK meet
Mods to Date: Window Tint 5% & 15%, ACC P13W Lighting, Adaptive DRL Harness, Ghost Armor, Lloyds "SS" Mats, Dash Plaque, Flowmaster Outlaw Exhaust, Drake Front Bowtie Delete, Stealth 3457 Chrome/Mirror Signal Bulbs, Grant Revolutions Steering Wheel, PFADT Sport Springs, Sway Bars, End Links, Trailing Arms, 4 Wheel Alignment, Hurst Auto Shifter and Paddle Shifter, Satin Black Rear Tail Light Bezels
Buffnshine is offline   Reply With Quote
Old 02-11-2011, 10:17 PM   #6
Cali_Camaro_SS

 
Cali_Camaro_SS's Avatar
 
Drives: 2010 Camaro 1SS (BLACK)
Join Date: Jan 2010
Location: Cali
Posts: 768
I did. lol
__________________
_________________
1SS: Dnyatech LT Headers | Dynamaxx CatBack | Diablo Tune | Intake | Pfatds Springs | Heritage Grill | Blacked out Bezels | Black Chevy Sign | Blacked out Wheels | Tint | HIDs w/Error code Eliminator | Green Dome/Trunk Light |

Cali_Camaro_SS is offline   Reply With Quote
Old 02-14-2011, 11:28 PM   #7
Hess Motorsports
Account Suspended
 
Drives: 2010 SS with WAY TOO MANY MODS
Join Date: Sep 2010
Location: Orange County CA
Posts: 128
I would actually recommend running 0.010 toe in at the front and rear. 0.020 is a little too much toe in for these cars. It will work but I like to see a bit of toe out. Otherwise you may want to increase the caster spread to 0.3-0.5 on the right tohelp correct for road crown and a slight drift. Hit me up on PM if you have any questions. We align dozens of these all the time on our Snap-On laser system.
Hess Motorsports is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Question about tire sizes Jram1588 Wheels and Tires Talk Sponsored by The Tire Rack 9 07-17-2010 08:27 AM
Custom wheel offset question ... Bowtie Junkman Wheels and Tires Talk Sponsored by The Tire Rack 4 04-23-2010 06:16 PM
Question Involving 4.10 gears & Bushings Deric884 V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6) 1 02-13-2010 07:53 AM
Question re: c.i. displacement and hp Arli 5th Gen Camaro SS LS LT General Discussions 6 03-24-2009 02:20 PM
IRS question 454lsxss Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons 5 08-30-2008 10:06 PM


All times are GMT -5. The time now is 05:43 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.