Anticharger's SIM LS - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Pt_killa · 12-26-2011, 01:44 PM

Awesome dude!! this is amazing, finally someone built an engine bay mount setup. What size compressor wheel and exhuast turbine/housing ar are you using? What are doing for the turbo oil drain? I got to admit your turbo setup sounds deeper than any other, sounds great! Keep us updated!

XxantichargerxX · 12-26-2011, 02:11 PM

I'm not sure about that but next time I take the car to the shop then I will let you know. Thank you it sounds much better.

Quote:

Originally Posted by Pt_killa

Awesome dude!! this is amazing, finally someone built an engine bay mount setup. What size compressor wheel and exhuast turbine/housing ar are you using? What are doing for the turbo oil drain? I got to admit your turbo setup sounds deeper than any other, sounds great! Keep us updated!

Macrackie · 12-26-2011, 04:03 PM

Looking forward to seeing this at the next hooters meet. Who is building this with you?

XxantichargerxX · 12-26-2011, 04:30 PM

benchmark tuning

Quote:

Originally Posted by Macrackie

Looking forward to seeing this at the next hooters meet. Who is building this with you?

blackTT600 · 12-26-2011, 05:46 PM

Quote:

Originally Posted by Pt_killa

Awesome dude!! this is amazing, finally someone built an engine bay mount setup. What size compressor wheel and exhuast turbine/housing ar are you using? What are doing for the turbo oil drain? I got to admit your turbo setup sounds deeper than any other, sounds great! Keep us updated!

pretty sure its just gravity.

blackTT600 · 12-26-2011, 05:49 PM

xxantichargerxx your car is BEAST!!! I WANT

Ill be there soon

You said that is was all a custom build? what about those DAM sexy headers?

cant wait to see how this ends!!

XxantichargerxX · 12-26-2011, 05:53 PM

Thank you.
All piping was custom made using modeling which was the blue thing. Can't wait to up the boost.

Quote:

Originally Posted by blackTT600

xxantichargerxx your car is BEAST!!! I WANT

Ill be there soon

You said that is was all a custom build? what about those DAM sexy headers?

cant wait to see how this ends!!

Pt_killa · 12-26-2011, 06:04 PM

Quote:

Originally Posted by blackTT600

pretty sure its just gravity.

Lol i would hope its gravity drain, i should've rephrased to where is it draining to, oil pan, somewhere else on the block etc. I know mti wanted to return their oil to the oil pan but you have to lift the engine to access the pan so it took a while. Just wondering and interested in the build!

blackTT600 · 12-26-2011, 07:01 PM

Quote:

Originally Posted by Pt_killa

Lol i would hope its gravity drain, i should've rephrased to where is it draining to, oil pan, somewhere else on the block etc. I know mti wanted to return their oil to the oil pan but you have to lift the engine to access the pan so it took a while. Just wondering and interested in the build!

hahaha ok. yeah good question.

V6owner · 12-26-2011, 08:23 PM

Looks like I got you popular lol

XxantichargerxX · 12-26-2011, 09:15 PM

Thanks i'm the newest buzz in the FI V6 world now

Quote:

Originally Posted by V6owner

Looks like I got you popular lol

CiscoBee · 12-26-2011, 09:29 PM

Quote:

Originally Posted by XxantichargerxX

Thanks i'm the newest buzz in the FI V6 world now

Great job on the build!!!
Is Trifecta tuning the ECM for you???

XxantichargerxX · 12-26-2011, 09:32 PM

Thank you, Yes he tuned the ECM.

Quote:

Originally Posted by CiscoBee

Great job on the build!!!
Is Trifecta tuning the ECM for you???

CiscoBee · 12-26-2011, 09:44 PM

Quote:

Originally Posted by XxantichargerxX

Thank you, Yes he tuned the ECM.

Super!!!
Looking forward to reading about your progress!!!

TJ91 · 12-27-2011, 12:52 AM

wow that is sweet.
Looks and SOUNDS great!
The fender linings wont melt with all that heat?
Please keep us posted, this is an awesome build

XxantichargerxX · 12-27-2011, 10:43 AM

So far I had no problem with heat melting anything.

Quote:

Originally Posted by TJ91

wow that is sweet.
Looks and SOUNDS great!
The fender linings wont melt with all that heat?
Please keep us posted, this is an awesome build

blackTT600 · 12-27-2011, 12:02 PM

All sorts of cars have engine bay turbos, I cant imagine that we would not be able to have one due to heat. Some one said that a ram air hood would help, yeah it may, but I feel it would cause aero problems i.e. lift at high speeds. I feel that a heat extractor hood, like the sinister hood would be better.

XxantichargerxX · 12-27-2011, 04:42 PM

I think that the best hood would be a hood like J Leno or showstoppers hood.

Quote:

Originally Posted by blackTT600

All sorts of cars have engine bay turbos, I cant imagine that we would not be able to have one due to heat. Some one said that a ram air hood would help, yeah it may, but I feel it would cause aero problems i.e. lift at high speeds. I feel that a heat extractor hood, like the sinister hood would be better.

SIXJAK · 01-02-2012, 11:23 AM

Yeah you're car sounds like a beast. It's not really a V8 sound nor is it really a V6 sound. It just sounds really mean and awesome. Very cool build. This is the type of stuff that I dig. It's just really different.

XxantichargerxX · 01-02-2012, 12:33 PM

Thank you thats what im trying to do. Make it different than all others.

Quote:

Originally Posted by SIXJAK

Yeah you're car sounds like a beast. It's not really a V8 sound nor is it really a V6 sound. It just sounds really mean and awesome. Very cool build. This is the type of stuff that I dig. It's just really different.

SIXJAK · 01-02-2012, 10:19 PM

Quote:

Originally Posted by XxantichargerxX

Thank you thats what im trying to do. Make it different than all others.

You are definitely succeeding. Your car to me, is one of the most compelling builds on Camaro5 V8 or V6. I'd take the way your car sounds over any V8 any day. Mine sounds pretty sweet with the LT's and the ARK DT-S catback but even on video I don't think I've heard anything that sounds as good as yours. I guess the million dollar question is how does it sound inside on a long trip? your car sounds so killer though I prolly wouldn't care about any possible drone.

XxantichargerxX · 01-03-2012, 12:30 PM

Thank you very much. The way the shop made the piping it's less drone in the cabin. Only time its drone is when im in boost.

Quote:

Originally Posted by SIXJAK

You are definitely succeeding. Your car to me, is one of the most compelling builds on Camaro5 V8 or V6. I'd take the way your car sounds over any V8 any day. Mine sounds pretty sweet with the LT's and the ARK DT-S catback but even on video I don't think I've heard anything that sounds as good as yours. I guess the million dollar question is how does it sound inside on a long trip? your car sounds so killer though I prolly wouldn't care about any possible drone.

blackTT600 · 01-03-2012, 04:04 PM

So we all know your car is THE SH!T, we need some in action videos??

Elykson · 01-03-2012, 04:31 PM

You may have to wait a few months. LOL it's 21 degrees outside today in the Chicago area!

blackTT600 · 01-03-2012, 07:22 PM

hahaha NOOOOO, I guess south Fl aint to bad, 54 to day

12-26-2011, 01:44 PM	#51
Pt_killa Drives: Black 2010 Camaro V6 Join Date: Apr 2010 Location: VA Posts: 396 View My Garage	Awesome dude!! this is amazing, finally someone built an engine bay mount setup. What size compressor wheel and exhuast turbine/housing ar are you using? What are doing for the turbo oil drain? I got to admit your turbo setup sounds deeper than any other, sounds great! Keep us updated! __________________ Stock 18" Heritage w/ BFG G-Force ZR tires / Blacked out bowties and tail lights / Custom Remote-Mount Turbo Kit (Precision 6776S .81ar ex. @ 6.5psi, Tial 38mm WG, Greddy Type-S BOV) / RX Catch Can / 10" Orion Subs / RX-FTI 3600 Stall / Blue Well Lights / Team LLT

12-26-2011, 08:23 PM	#60
V6owner I'm slow, lets race! Drives: Rx Supercharged V6 Camaro Join Date: Mar 2011 Location: Rosenberg, TX Posts: 1,913 View My Garage	Looks like I got you popular lol __________________ 2010 Camaro LLT SOLD 2012 Silverado 6.2L CURRENT

12-27-2011, 12:52 AM	#65
TJ91 :chevy: Drives: 2LT/RS Join Date: Jun 2008 Location: Toronto Posts: 12,346	wow that is sweet. Looks and SOUNDS great! The fender linings wont melt with all that heat? Please keep us posted, this is an awesome build __________________ CAMARO Consult your doctor before taking Camaro Side effects include Sudden increase in Heart Rate, Insomnia and occasional hallucinations If you experience Permagrin exceeding 4 hours after taking Camaro, seek immediate Camaro5 Help CAMARO Bringing excitment back into the Garage

01-03-2012, 04:31 PM	#74
Elykson Custom One Off Drives: 2010 Chicago Blackhawks Edition #1 Join Date: Oct 2010 Location: Madhouse on Madison Posts: 1,138	You may have to wait a few months. LOL it's 21 degrees outside today in the Chicago area! __________________ Vararam Intake/SLP Loud Mouth II/BBK LT HFC/Magnaflow x-pipe/Pfadt Springs/Black Ice-olator/FE3 suspension/VMAX TB/RX catch can/Trifecta Tune http://www.camaro5.com/forums/showthread.php?t=129416

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Tell me about your LS	2010Camaro2LTRS	5th Gen Camaro SS LS LT General Discussions	78	04-13-2012 05:59 PM
2011 LS Black cloth interior photo request	starbase	Camaro Photos \| Spyshots \| Video \| Media Gallery	13	03-06-2012 12:36 PM
Camaro ls sim	5thGENv6	Autos For Sale / Wanted	3	12-11-2010 11:43 AM
kevC's SIM LS from Texas	kevC	Member Car Journals	6	09-08-2010 07:16 PM
Holley LS Fest, September 10-12, 2010	Pro Stock John	USA - Great Lakes	1	01-28-2010 08:18 AM

12-26-2011, 04:03 PM	#53
Macrackie Drives: 2011 Camaro LS Stripper model Join Date: Feb 2011 Location: South Beloit IL Posts: 580	Looking forward to seeing this at the next hooters meet. Who is building this with you?

12-26-2011, 05:49 PM	#56
blackTT600 Drives: 2011 2LT M6 SC Join Date: Jan 2011 Location: South Florida Posts: 732 View My Garage	xxantichargerxx your car is BEAST!!! I WANT Ill be there soon You said that is was all a custom build? what about those DAM sexy headers? cant wait to see how this ends!!

12-27-2011, 12:02 PM	#67
blackTT600 Drives: 2011 2LT M6 SC Join Date: Jan 2011 Location: South Florida Posts: 732 View My Garage	All sorts of cars have engine bay turbos, I cant imagine that we would not be able to have one due to heat. Some one said that a ram air hood would help, yeah it may, but I feel it would cause aero problems i.e. lift at high speeds. I feel that a heat extractor hood, like the sinister hood would be better.

01-02-2012, 11:23 AM	#69
SIXJAK Account Suspended Drives: MO's only SC'd LLT. Join Date: Feb 2010 Location: Branson MO Posts: 2,466 View My Garage	Yeah you're car sounds like a beast. It's not really a V8 sound nor is it really a V6 sound. It just sounds really mean and awesome. Very cool build. This is the type of stuff that I dig. It's just really different.

01-03-2012, 04:04 PM	#73
blackTT600 Drives: 2011 2LT M6 SC Join Date: Jan 2011 Location: South Florida Posts: 732 View My Garage	So we all know your car is THE SH!T, we need some in action videos??

01-03-2012, 07:22 PM	#75
blackTT600 Drives: 2011 2LT M6 SC Join Date: Jan 2011 Location: South Florida Posts: 732 View My Garage	hahaha NOOOOO, I guess south Fl aint to bad, 54 to day