Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
DJ Grilles
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Engine | Drivetrain | Powertrain Technical Discussions > Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons

Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons Bolt-Ons | Intakes | Exhaust

Reply
 
Thread Tools
Old 02-07-2011, 08:16 PM   #1
SSawdusty
Crewel Jewel
 
SSawdusty's Avatar
 
Drives: RJT-2SS-RS-6M
Join Date: Nov 2009
Location: Nanaimo, BC
Posts: 362
My First Winter Mods..Elite..ADM..Roto-Fab

My first install was a catch can from Elite Engineering. An easy job and a very well made product. Great shipping service from Steve. I used Russell stainless hose and fittings to clean it up a little more.

Then came my ADM race intake with scoop. Another great product, well made and easy to install. A special thanks to Andy @ ADM for fixing me up big time. Used some more Russell fittings and hose for the hose from the valve cover to the intake. Gave the steel tubing on the valve cover a little tweak so the hose cleared everything.

Next came the W/W bottle replacement from Roto-Fab. Again a very well made product....looks factory and not made from thin cheap plastic either. Well done Roto-Fab. Easy install as well. Good time to do it is when your putting in that ADM scoop. I routed my supply hose down the inside of the frame then went under the frame and through the little wedged hole from the ADM scoop. Put some vinyl around it so it wont chafe. The factory line I routed and tied to the lighting wires. This way I didn't have to trim it.

While I waited patiently for the posty to come and drop off my goodies I gave my calipers a color change. I used the VHT high temp caliper paint. Put the decals on, then clear coated. Hopefully it will stand up for a while till I powder coat them. Also started dying my interior stitching.....no pictures yet cause I'm not done.

More to come............
Attached Images
         
SSawdusty is offline   Reply With Quote
Old 02-07-2011, 08:21 PM   #2
2010 SSRS



 
2010 SSRS's Avatar
 
Drives: 3 V8 Camaros
Join Date: May 2009
Location: The Ocean State
Posts: 123,973
nice, I have the ADM, you are going to be very happy with it.
__________________
Jannetty Racing JRE Street Package
2010 SSRS is offline   Reply With Quote
Old 02-07-2011, 08:47 PM   #3
SSawdusty
Crewel Jewel
 
SSawdusty's Avatar
 
Drives: RJT-2SS-RS-6M
Join Date: Nov 2009
Location: Nanaimo, BC
Posts: 362
Quote:
Originally Posted by 2010 SSRS View Post
nice, I have the ADM, you are going to be very happy with it.
Thanks....Need winter to end so I can get back on the road.
SSawdusty is offline   Reply With Quote
Old 02-07-2011, 08:52 PM   #4
Bad70supreme


 
Bad70supreme's Avatar
 
Drives: 2010 aqua blue SS/RS M6
Join Date: Feb 2010
Location: plainfield, IL
Posts: 2,616
Nice job, brakes turned out great! I cant wait to do mine, stupid winter
__________________
217/228 .565 cam, th400 swap with 3600 stall, headers, GPI tune, VR intake, Bo white TB
11.63@ 118.6
11.66@ 119.5
Bad70supreme is offline   Reply With Quote
Old 02-07-2011, 09:26 PM   #5
navyblueSS
 
Drives: 2002 Camaro SS
Join Date: Jul 2009
Location: Quitman, LA
Posts: 613
Looks good, the calipers turned out very nice.
__________________
2010 M6 SS/RS SW w/IOM Stripes - Futral Motorsports Custom Cam & Tune 483rwhp - 449rwtq
navyblueSS is offline   Reply With Quote
Old 02-07-2011, 10:00 PM   #6
thesnoopster


 
thesnoopster's Avatar
 
Drives: '10 SIM SS/A6 - '12 SIM Equinox LT
Join Date: Jul 2009
Location: Northern Virginia
Posts: 3,626
Hey, Looking good!
__________________
2010 SIM Camaro 1SS/A6

Mods: "93 Octane and a baby seat..." TunedByFrost/EFI Performance,LLC @ PAS "You gotta love me ... or leave me alone"
thesnoopster is offline   Reply With Quote
Old 02-08-2011, 01:10 PM   #7
ssmike
Missing Big Red
 
ssmike's Avatar
 
Drives: 2013 Equinox CRT
Join Date: Jul 2009
Location: Buffalo, NY
Posts: 6,253
Well done! Looks great! How's the weather up there? Have you had a chance to take her out for a run?
ssmike is offline   Reply With Quote
Old 02-08-2011, 03:51 PM   #8
SSawdusty
Crewel Jewel
 
SSawdusty's Avatar
 
Drives: RJT-2SS-RS-6M
Join Date: Nov 2009
Location: Nanaimo, BC
Posts: 362
Quote:
Originally Posted by ssmike View Post
Well done! Looks great! How's the weather up there? Have you had a chance to take her out for a run?
Thanks for the compliments everyone. Weathers mild on the west coast right now. Have not had her out yet, still putting salt on the roads once and a while. Plus some more mods yet to come..headers, exhaust, shifter, wheels. So hopefully around April.
SSawdusty is offline   Reply With Quote
Old 02-08-2011, 07:43 PM   #9
ADM PERFORMANCE

 
Drives: 2013 ZL1 #138
Join Date: Oct 2008
Location: DfW - Texas
Posts: 3,919
Quote:
Originally Posted by Sawdusty View Post
Thanks for the compliments everyone. Weathers mild on the west coast right now. Have not had her out yet, still putting salt on the roads once and a while. Plus some more mods yet to come..headers, exhaust, shifter, wheels. So hopefully around April.
Looks like ADM and Rotofab work good together
ADM PERFORMANCE is offline   Reply With Quote
Old 02-10-2011, 01:08 AM   #10
SSawdusty
Crewel Jewel
 
SSawdusty's Avatar
 
Drives: RJT-2SS-RS-6M
Join Date: Nov 2009
Location: Nanaimo, BC
Posts: 362
After reading all the talk about installing a catch can or not. My mind was made up after taking of the throttle body and looking for myself. I was surprised to see the film of oil inside the intake. Took a paper towel and wiped in there...wow. If your not into modding the money spent for a catch can is well worth it IMHO.
SSawdusty is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Hey Mods Winter tires rawj7 Wheels and Tires Talk Sponsored by The Tire Rack 26 09-04-2010 11:08 AM
ROTO FAB new mods rharon Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons 11 07-06-2010 09:00 PM
Some Mods Done Over Winter miltp Cosmetics and Lighting Modification Discussions 7 05-19-2010 03:58 PM
Thanks ADM for my Mods and Dyno of my 2010 L99 SS Camaro Jekyll-N-Hyde Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons 17 05-16-2010 07:44 AM
ADM STAGE II PORTED HEADs and STAGE II CAM 463HP/446TQ RWHP freemaSSon Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons 14 10-11-2009 10:48 PM


All times are GMT -5. The time now is 11:47 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.