Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
B&M
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Engine | Drivetrain | Powertrain Technical Discussions > Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons

Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons Bolt-Ons | Intakes | Exhaust

Reply
 
Thread Tools
Old 02-10-2011, 11:46 AM   #1
markssylver
 
markssylver's Avatar
 
Drives: 95 bbb impala ss
Join Date: Apr 2009
Location: md
Posts: 333
MY new ADM valve covers

heres some pictures of my new ADM valve covers i put on my car a couple of weeks ago






__________________
10.56@134mph
ADM BUILT AND TUNED CGM 2SS RS
ADM/LPE 417 with ported heads/inconel vavles gt11 cam
ADM ported maggie with 14 rib rear 10 rib front pulleys
ADM fuel system and race air intake
ADM/LPE ZR1 clutch /pedalreturn spring
ADM billet aluminum valve covers /RPM LEVEL 6 TR6060
LPE HD 241mm diff with 3:45 gears HD axles and d/s
ADM widened wheels with 315nitto nt05s Bogart 17 dragwheels CTS-V front 6 piston brakes
Pedders HD subframe/differential bushings alignment kit 27/32mm sways Supercar coilovers
683RWHP/650RWTQ
markssylver is offline   Reply With Quote
Old 02-10-2011, 12:02 PM   #2
navyblueSS
 
Drives: 2002 Camaro SS
Join Date: Jul 2009
Location: Quitman, LA
Posts: 613
Nice, looks good!
__________________
2010 M6 SS/RS SW w/IOM Stripes - Futral Motorsports Custom Cam & Tune 483rwhp - 449rwtq
navyblueSS is offline   Reply With Quote
Old 02-10-2011, 12:05 PM   #3
TeddyP25
 
TeddyP25's Avatar
 
Drives: 2SS
Join Date: May 2009
Location: Fort Collins
Posts: 609
Very nice...
Attached Images
  
__________________
2SS/RS CGM/BLK GFX MN6418 Stroker.710rwhp/774lbtq..Pfadt trailing arms,toe links,coilovers,swaybars,end links,engine mounts,dif/sub bushings.MGWshifter.Tick LVL 3.BMR loop,chassis brace.ARH1 7/8 LT's/ARH exhaust.ADM gauges/race CAI.Stillen drill/slot rotors.Hawk pads.G-stop brake lines.Focal/JL Audio.custom bowties.E-FORCE SC.8 rib IW 10%OD.TSW Vairano,Nitto 315/275's.LPE dual pump/module.85lb inj,custom valve covers.RMCR tune.TOOLEY RACING CAM.JRE posi kit.JRE fuel upgrade.RX CatchCan.DSS axels/DS.WYOSPEED builthttp://www.camaro5.com/forums/showthread.php?t=115687
TeddyP25 is offline   Reply With Quote
Old 02-10-2011, 12:36 PM   #4
Camaro21


 
Camaro21's Avatar
 
Drives: 2010 2SS/RS M6
Join Date: Jul 2009
Location: DFW, TX
Posts: 5,041
Those Look B@D@$$
__________________
Camaro21 is offline   Reply With Quote
Old 02-10-2011, 12:39 PM   #5
2010 SSRS



 
2010 SSRS's Avatar
 
Drives: 3 V8 Camaros
Join Date: May 2009
Location: The Ocean State
Posts: 123,973
nice
__________________
Jannetty Racing JRE Street Package
2010 SSRS is offline   Reply With Quote
Old 02-10-2011, 01:17 PM   #6
SSawdusty
Crewel Jewel
 
SSawdusty's Avatar
 
Drives: RJT-2SS-RS-6M
Join Date: Nov 2009
Location: Nanaimo, BC
Posts: 362
Wow....very nice. Me want
SSawdusty is offline   Reply With Quote
Old 02-10-2011, 06:06 PM   #7
SWAT


 
SWAT's Avatar
 
Drives: 2011 2SS RS L99
Join Date: Jan 2011
Location: Grand Rapids, MI
Posts: 5,742
Nice Looking!
__________________
"Live for today because yesterday is gone and tomorrow may never come."
SWAT is offline   Reply With Quote
Old 02-10-2011, 08:59 PM   #8
markssylver
 
markssylver's Avatar
 
Drives: 95 bbb impala ss
Join Date: Apr 2009
Location: md
Posts: 333
Thanks for all the replies Andy sells some pretty cool stuff I have pretty much have everything he sells for a camaro look at my Sig next on my list is the 6 piston brembos
__________________
10.56@134mph
ADM BUILT AND TUNED CGM 2SS RS
ADM/LPE 417 with ported heads/inconel vavles gt11 cam
ADM ported maggie with 14 rib rear 10 rib front pulleys
ADM fuel system and race air intake
ADM/LPE ZR1 clutch /pedalreturn spring
ADM billet aluminum valve covers /RPM LEVEL 6 TR6060
LPE HD 241mm diff with 3:45 gears HD axles and d/s
ADM widened wheels with 315nitto nt05s Bogart 17 dragwheels CTS-V front 6 piston brakes
Pedders HD subframe/differential bushings alignment kit 27/32mm sways Supercar coilovers
683RWHP/650RWTQ
markssylver is offline   Reply With Quote
Old 02-10-2011, 09:04 PM   #9
GEEo
OKCamaros
 
GEEo's Avatar
 
Drives: '13 WRX STi
Join Date: Mar 2010
Location: Muskogee, OK
Posts: 4,600
Nice!!

did you have to do any mod to put them on?
GEEo is offline   Reply With Quote
Old 02-10-2011, 10:39 PM   #10
Jekyll-N-Hyde
I put the FU back in FUN
 
Jekyll-N-Hyde's Avatar
 
Drives: 1969 SS 396 , 2010 Camaro SS
Join Date: Jun 2009
Location: Between Weatherford and Azle TX hway730
Posts: 2,139
I would seriously love to Sport those on my Engine. IMO every ADM build deserves to wear the name of the guy who did the work to it
Jekyll-N-Hyde is offline   Reply With Quote
Old 02-12-2011, 09:01 PM   #11
markssylver
 
markssylver's Avatar
 
Drives: 95 bbb impala ss
Join Date: Apr 2009
Location: md
Posts: 333
No I ddidn't have to mod anything for them to fit but I did change the way the fuel line come s into the fuel rail I have coming in from the back instead of off the side over top of the coils
__________________
10.56@134mph
ADM BUILT AND TUNED CGM 2SS RS
ADM/LPE 417 with ported heads/inconel vavles gt11 cam
ADM ported maggie with 14 rib rear 10 rib front pulleys
ADM fuel system and race air intake
ADM/LPE ZR1 clutch /pedalreturn spring
ADM billet aluminum valve covers /RPM LEVEL 6 TR6060
LPE HD 241mm diff with 3:45 gears HD axles and d/s
ADM widened wheels with 315nitto nt05s Bogart 17 dragwheels CTS-V front 6 piston brakes
Pedders HD subframe/differential bushings alignment kit 27/32mm sways Supercar coilovers
683RWHP/650RWTQ
markssylver is offline   Reply With Quote
Old 02-13-2011, 05:19 PM   #12
woodside783
Casey Woodside
 
woodside783's Avatar
 
Drives: W/28
Join Date: Jun 2010
Location: Tn
Posts: 1,268
what kind of plug wires u got they look awsome
woodside783 is offline   Reply With Quote
Old 02-15-2011, 03:06 PM   #13
markssylver
 
markssylver's Avatar
 
Drives: 95 bbb impala ss
Join Date: Apr 2009
Location: md
Posts: 333
the plug wires come with the valve covers
__________________
10.56@134mph
ADM BUILT AND TUNED CGM 2SS RS
ADM/LPE 417 with ported heads/inconel vavles gt11 cam
ADM ported maggie with 14 rib rear 10 rib front pulleys
ADM fuel system and race air intake
ADM/LPE ZR1 clutch /pedalreturn spring
ADM billet aluminum valve covers /RPM LEVEL 6 TR6060
LPE HD 241mm diff with 3:45 gears HD axles and d/s
ADM widened wheels with 315nitto nt05s Bogart 17 dragwheels CTS-V front 6 piston brakes
Pedders HD subframe/differential bushings alignment kit 27/32mm sways Supercar coilovers
683RWHP/650RWTQ
markssylver is offline   Reply With Quote
Old 02-15-2011, 03:09 PM   #14
Camaro21


 
Camaro21's Avatar
 
Drives: 2010 2SS/RS M6
Join Date: Jul 2009
Location: DFW, TX
Posts: 5,041
Here is a link to them on the ADM Performance website:

http://www.admperformance.com/produc...50&product=250
__________________
Camaro21 is offline   Reply With Quote
Old 02-15-2011, 03:11 PM   #15
Buffnshine
So Cal Camaro5 Race Team
 
Buffnshine's Avatar
 
Drives: '10 SS/RS, '06 HHR, '70 El Camino
Join Date: Sep 2009
Location: Huntington Beach, CA
Posts: 2,630
will those work without the supercharger on a normal L99, they are beautiful
__________________
TEAM L99 - So Cal Camaro5 Race Team #27
9/5/09 Purchased #36962 Black 1SS/RS L99 "E-TCKT" Base Dyno 328hp/341tq @BBK meet
Mods to Date: Window Tint 5% & 15%, ACC P13W Lighting, Adaptive DRL Harness, Ghost Armor, Lloyds "SS" Mats, Dash Plaque, Flowmaster Outlaw Exhaust, Drake Front Bowtie Delete, Stealth 3457 Chrome/Mirror Signal Bulbs, Grant Revolutions Steering Wheel, PFADT Sport Springs, Sway Bars, End Links, Trailing Arms, 4 Wheel Alignment, Hurst Auto Shifter and Paddle Shifter, Satin Black Rear Tail Light Bezels
Buffnshine is offline   Reply With Quote
Old 02-16-2011, 09:16 PM   #16
markssylver
 
markssylver's Avatar
 
Drives: 95 bbb impala ss
Join Date: Apr 2009
Location: md
Posts: 333
Quote:
Originally Posted by Buffnshine View Post
will those work without the supercharger on a normal L99, they are beautiful
Yes they will work without the supercharger they just replace your factory valve covers
__________________
10.56@134mph
ADM BUILT AND TUNED CGM 2SS RS
ADM/LPE 417 with ported heads/inconel vavles gt11 cam
ADM ported maggie with 14 rib rear 10 rib front pulleys
ADM fuel system and race air intake
ADM/LPE ZR1 clutch /pedalreturn spring
ADM billet aluminum valve covers /RPM LEVEL 6 TR6060
LPE HD 241mm diff with 3:45 gears HD axles and d/s
ADM widened wheels with 315nitto nt05s Bogart 17 dragwheels CTS-V front 6 piston brakes
Pedders HD subframe/differential bushings alignment kit 27/32mm sways Supercar coilovers
683RWHP/650RWTQ
markssylver is offline   Reply With Quote
Old 02-21-2011, 05:41 AM   #17
ADM PERFORMANCE

 
Drives: 2013 ZL1 #138
Join Date: Oct 2008
Location: DfW - Texas
Posts: 3,919
Quote:
Originally Posted by markssylver View Post
Yes they will work without the supercharger they just replace your factory valve covers

We sell a Maggie,ADM Valve cover combo meal!!!!
ADM PERFORMANCE is offline   Reply With Quote
Old 02-21-2011, 09:50 AM   #18
Kwik

 
Drives: car
Join Date: Feb 2010
Location: USA
Posts: 802
Mast and MTI also make some nice looking valve covers.
__________________
Upgrades to suspension, brakes, motor and appearance. 482.7 RWHP- 434.2 RWT - All motor.
Kwik is offline   Reply With Quote
Old 02-21-2011, 03:41 PM   #19
orange-prince
QATAR 2022
 
orange-prince's Avatar
 
Drives: black cts-V coupe a6
Join Date: Apr 2010
Location: doha-qatar ( middle east )
Posts: 990
can the valve covers be in hugger orange ? if so pm me please the price shipped to 11413 NY
orange-prince is offline   Reply With Quote
Old 03-08-2011, 01:49 AM   #20
Buffnshine
So Cal Camaro5 Race Team
 
Buffnshine's Avatar
 
Drives: '10 SS/RS, '06 HHR, '70 El Camino
Join Date: Sep 2009
Location: Huntington Beach, CA
Posts: 2,630
Quote:
Originally Posted by ADM PERFORMANCE View Post
We sell a Maggie,ADM Valve cover combo meal!!!!
lol I wish i could order that happy meal
__________________
TEAM L99 - So Cal Camaro5 Race Team #27
9/5/09 Purchased #36962 Black 1SS/RS L99 "E-TCKT" Base Dyno 328hp/341tq @BBK meet
Mods to Date: Window Tint 5% & 15%, ACC P13W Lighting, Adaptive DRL Harness, Ghost Armor, Lloyds "SS" Mats, Dash Plaque, Flowmaster Outlaw Exhaust, Drake Front Bowtie Delete, Stealth 3457 Chrome/Mirror Signal Bulbs, Grant Revolutions Steering Wheel, PFADT Sport Springs, Sway Bars, End Links, Trailing Arms, 4 Wheel Alignment, Hurst Auto Shifter and Paddle Shifter, Satin Black Rear Tail Light Bezels
Buffnshine is offline   Reply With Quote
Old 11-23-2011, 07:38 PM   #21
C O Jones
Willy Nailer/Honey Badger
 
C O Jones's Avatar
 
Drives: 2010 Black SS/RS M6
Join Date: Aug 2011
Location: SFL
Posts: 604
You guys need to do a black Friday group sale for those valve covers lol
__________________
C O Jones is offline   Reply With Quote
Old 11-25-2011, 08:03 AM   #22
ADM PERFORMANCE

 
Drives: 2013 ZL1 #138
Join Date: Oct 2008
Location: DfW - Texas
Posts: 3,919
Quote:
Originally Posted by C O Jones View Post
You guys need to do a black Friday group sale for those valve covers lol

I was thinking a BLACK DECEMBER SALE!

Call me and I will take care of you on the price!
ADM PERFORMANCE is offline   Reply With Quote
Old 11-25-2011, 11:22 AM   #23
ADM PERFORMANCE

 
Drives: 2013 ZL1 #138
Join Date: Oct 2008
Location: DfW - Texas
Posts: 3,919
USE PROMO

Quote:
Originally Posted by C O Jones View Post
You guys need to do a black Friday group sale for those valve covers lol
Use promo code - BLACK
ADM PERFORMANCE is offline   Reply With Quote
Old 11-25-2011, 05:00 PM   #24
C O Jones
Willy Nailer/Honey Badger
 
C O Jones's Avatar
 
Drives: 2010 Black SS/RS M6
Join Date: Aug 2011
Location: SFL
Posts: 604
Thanks will do
__________________
C O Jones is offline   Reply With Quote
Old 11-26-2011, 10:39 PM   #25
Mike2ss
Airborne Pathfinder
 
Mike2ss's Avatar
 
Drives: Stingray Z51
Join Date: Nov 2009
Location: San Benito, TX
Posts: 1,077
They do look good but for me I still don't like the plug wires interfering with the look of the covers.

Wish we had a way to get them out of the picture.
__________________
Stingray Z51, NPP exhaust
Other cars are- 95 BMW 325 sedan- AA exhaust, AA CAI, AA Strut bar, AA chip, M3 rotors and calipers, racing clutch, oversized injectors, upgraded M3 interior- Audi A5 SLine, with black out optics
Mike2ss is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Acronyms? KEEP RT Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons 20 03-11-2011 08:57 PM
Heads up...... Production ending this week on "Tall" Billet Valve Covers Bruce at Billet V8 Bolt-Ons & Tunes 0 10-20-2010 03:44 PM
All "NEW" Custom Billet Valve Covers for the Camaro Offered Bruce at Billet Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons 37 09-27-2010 11:01 AM


All times are GMT -5. The time now is 09:02 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.