Does anybody know what old school SS emblem - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Gangster · 02-22-2011, 09:08 PM

I just ordered a heritage grille and I want to put the old school ss in the middle, I called a buddy who owns a first gen resto shop to order one but Im not sure of the angle of the point. The emblem for 67,68,and 69 all have a different pitch at the point so I was wondering if someone did the foot work and measured and matched them up for the best fit. If not ill post it after I figure it out-thanks

Also, who is the best supplier to order the rear black out and old school ss emblem from? thanks

73camarolt · 02-22-2011, 09:10 PM

Rear black-out will depend if you want gloss black or matte black. If you want a real SS badge, any of them will work. I think you have to bend it alittle either way.

Silver2SSRS6spd · 02-22-2011, 09:13 PM

The rear SS can be purchased from SLP, shipping is steep. If you don't get an answer for the Front, order the one that is in the middle, they bend rather easily if i remember correctly.

jonm38 · 02-22-2011, 09:27 PM

I have the Heritage grill, left the emblem off. I haven't found the right one to fit.

Gangster · 02-22-2011, 09:29 PM

I figure if I cant get someone whos already done this ill just measure the angle and he will check all 3 first gen grilles and send me the closest one. the rear emblem I would think the 69 has to work. Im gonna go with the matte black for the blackout ill check into slp,thanks

SWAT · 02-23-2011, 07:01 AM

Year One has a lot of emblems.

http://www.yearone.com/serverfiles/f...ain2.asp?cat=8

mclark10 · 02-23-2011, 07:12 AM

SLP has the ols school front one with the landing pad. The landing pad has been the issue with most of them. I made my own last spring to mount an SS from the '07 Impala SS

halo8hkk · 02-23-2011, 08:27 AM

Quote:

Originally Posted by Silver2SSRS6spd

The rear SS can be purchased from SLP, shipping is steep. If you don't get an answer for the Front, order the one that is in the middle, they bend rather easily if i remember correctly.

MattSS · 02-23-2011, 10:08 AM

I used SLP's front and rear, with the SLP blackout in the back. The front badges are bendable and meant to be applied to a hard surface. That said, I just carefully pressed them onto the heritage grille and bent them a bit to get better adhesion. Looks great and matches the ones on the rear. I'm at work now with no pictures handy, but I'll try to get a pic uploaded later.

Gangster · 02-23-2011, 12:39 PM

Thanks, id appreciate it, after looking at all of them I really want to go with the old school emblems.

midnighter · 02-23-2011, 12:43 PM

I left the SS and deleted the

Name: 2010 camaro w-heritage grill.jpg
Views: 483
Size: 107.3 KB

y2k king · 02-23-2011, 12:49 PM

just bend to fit.

Gangster · 02-23-2011, 10:02 PM

that is sweet y2k! one more question,what are those lamps you installed where the drls used to be? do they match the halos?

crumpcru · 02-23-2011, 10:08 PM

I just ordered one that was for the heritage grill from clean cut creations it was around 38 bucks.

crumpcru · 02-23-2011, 10:12 PM

southerncarparts.com has the ss for the heritage grill to.

Hwystr · 02-23-2011, 10:35 PM

Check out Classic Industries, they have reproduction badging and a real good selection. sorry no link.

y2k king · 02-24-2011, 05:34 AM

Quote:

Originally Posted by Gangster

that is sweet y2k! one more question,what are those lamps you installed where the drls used to be? do they match the halos?

those are the white led's. they don't have the halo shape, but they match the white light. the stock drl's were an amber shade.

02-22-2011, 09:08 PM	#1
Gangster Camaro Crazy Drives: 2010 1SS/RS IBM/Grey M6 Join Date: Jun 2010 Location: Westchester,New York Posts: 202	Does anybody know what old school SS emblem I just ordered a heritage grille and I want to put the old school ss in the middle, I called a buddy who owns a first gen resto shop to order one but Im not sure of the angle of the point. The emblem for 67,68,and 69 all have a different pitch at the point so I was wondering if someone did the foot work and measured and matched them up for the best fit. If not ill post it after I figure it out-thanks Also, who is the best supplier to order the rear black out and old school ss emblem from? thanks

02-22-2011, 09:10 PM	#2
73camarolt Drives: Black 2010 SS, 73 LT Join Date: Feb 2009 Location: Germantown, MD Posts: 2,176 View My Garage	Rear black-out will depend if you want gloss black or matte black. If you want a real SS badge, any of them will work. I think you have to bend it alittle either way. __________________ 2002 Camaro SS- SLP LM2, Lid, Ported TB, UMI STB, LCA relo and Short Stick, Chrome ZR1 wheels, Tint

02-22-2011, 09:13 PM	#3
Silver2SSRS6spd Prefer to be blown! Drives: 2010 Silver/Black 2SS/RS 6 Speed Join Date: Mar 2010 Location: Nor-Cal Posts: 2,678 View My Garage	The rear SS can be purchased from SLP, shipping is steep. If you don't get an answer for the Front, order the one that is in the middle, they bend rather easily if i remember correctly. __________________ MagnaCharger TVS-2300 513rwhp 490 rwt and a radical suspension under the car.

02-22-2011, 09:27 PM	#4
jonm38 Drives: 2008 Chevy Silverado, Camaro 2SS Join Date: Jul 2009 Location: Fredericksburg, Virginia Posts: 582	I have the Heritage grill, left the emblem off. I haven't found the right one to fit. __________________ *Just Cruising!* USN - 1990 - 1994 2010 Camaro 2SS Red Jewel :flag1:

02-23-2011, 07:01 AM	#6
SWAT Drives: 2011 2SS RS Join Date: Jan 2011 Location: Grand Rapids, MI Posts: 5,294	Year One has a lot of emblems. http://www.yearone.com/serverfiles/f...ain2.asp?cat=8 __________________ *"Live for today because yesterday is gone and tomorrow may never come."*

02-22-2011, 09:29 PM	#5
Gangster Camaro Crazy Drives: 2010 1SS/RS IBM/Grey M6 Join Date: Jun 2010 Location: Westchester,New York Posts: 202	I figure if I cant get someone whos already done this ill just measure the angle and he will check all 3 first gen grilles and send me the closest one. the rear emblem I would think the 69 has to work. Im gonna go with the matte black for the blackout ill check into slp,thanks

02-23-2011, 07:12 AM	#7
mclark10 Drives: 2013 CRT ZL1 Vert M6, 2011 Equinox Join Date: Jul 2009 Location: Cortland, NY Posts: 3,453 View My Garage	SLP has the ols school front one with the landing pad. The landing pad has been the issue with most of them. I made my own last spring to mount an SS from the '07 Impala SS Attached Images __________________ Cosmetic Mods- A few Performance Mods- Even fewer (Click above image to learn about UpstateC5)

02-23-2011, 10:08 AM	#9
MattSS Drives: 2010 RSSS CGM Join Date: Jul 2010 Location: Illinois Posts: 24	I used SLP's front and rear, with the SLP blackout in the back. The front badges are bendable and meant to be applied to a hard surface. That said, I just carefully pressed them onto the heritage grille and bent them a bit to get better adhesion. Looks great and matches the ones on the rear. I'm at work now with no pictures handy, but I'll try to get a pic uploaded later.

02-23-2011, 12:39 PM	#10
Gangster Camaro Crazy Drives: 2010 1SS/RS IBM/Grey M6 Join Date: Jun 2010 Location: Westchester,New York Posts: 202	Thanks, id appreciate it, after looking at all of them I really want to go with the old school emblems.

02-23-2011, 12:43 PM	#11
midnighter Drives: 2010 Chevrolet Camaro SS 6M Join Date: Nov 2010 Location: CA Posts: 18,402	I left the SS and deleted the

02-23-2011, 12:49 PM	#12
y2k king Drives: 2011 ss camaro Join Date: Aug 2010 Location: spring hill, fl Posts: 1,735	just bend to fit. Attached Images __________________ 10/28/2010 got it

02-23-2011, 10:02 PM	#13
Gangster Camaro Crazy Drives: 2010 1SS/RS IBM/Grey M6 Join Date: Jun 2010 Location: Westchester,New York Posts: 202	that is sweet y2k! one more question,what are those lamps you installed where the drls used to be? do they match the halos? Last edited by Gangster; 02-23-2011 at 10:15 PM.

02-23-2011, 10:08 PM	#14
crumpcru Drives: 2011 camaro 2ss/rs Join Date: Feb 2011 Location: kouts, Indiana Posts: 18 View My Garage	I just ordered one that was for the heritage grill from clean cut creations it was around 38 bucks.

02-23-2011, 10:12 PM	#15
crumpcru Drives: 2011 camaro 2ss/rs Join Date: Feb 2011 Location: kouts, Indiana Posts: 18 View My Garage	southerncarparts.com has the ss for the heritage grill to.

02-23-2011, 10:35 PM	#16
Hwystr GM Millwright Drives: 2011 Camaro 2SS/RS M6, Lingenfelter Join Date: Aug 2010 Location: Fort Wayne, IN Posts: 61	Check out Classic Industries, they have reproduction badging and a real good selection. sorry no link.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Removing Rear Bowtie and SS Emblem....Any Tutorials?	blahzay	Camaro DIY & HOW-TO instructions & discussions	5	06-28-2010 06:24 PM
Removing SS emblem from grill	Kwik	Cosmetics and Lighting Modification Discussions	8	04-09-2010 09:34 AM
SS emblem on speedo cluster	domano 68	5th Gen Camaro SS LS LT General Discussions	3	06-30-2009 09:39 PM