JANNETTY RACING UPDATED CUSTOM TUNE INSTRUCTIONS

[JANNETTYRACING]

JANNETTY RACING CUSTOM TUNE INSTRUCTIONS

When you Purchase an SCT X3 Hand Held Tuner from me you get 1, 93 OR, 1, 91 Octane Tune For Free for your simple bolt on mods, exclusions apply for cams, superchargers and nitrous.

PLEASE SPECIFY OCTANE WHEN REQUESTING CUSTOM TUNE, DEFAULT IS 93 OCT.

Additional Tunes with minor changes are available for 50.00 each, i.e. Second tune for a different Octane.

Your new SCT X3 will come to you Blank, You will need to connect the device to your car and Upload Stock tune file, here is how, plug the device in to your OBDII port, select Program Vehicle, Using the left arrow scroll left to UPLOAD STOCK, it will prompt you to turn on the key, do so, and hit select.

Your tuner came with a disc with Free Software called SCT Device Updater software, install this in your home or laptop computer Before you connect the device to your computer.

Then After you install and OPEN SCT Device updater software, you can connect your X3 to your computer, Drivers should install automatically, then Get Stock File, Click Browse, Find your Desktop and Click Save.

Go to your Desktop, there will be 3 files, Select the one with Your VinNumber.sul and email it to me tedj@jannettyracing.com along with your Full name, Address phone numbers, And all vehicle information Year, Make, Model, Engine, Trans, List of performance modifications, and Octane you want to run your car on, i.e 93 or 91.

PLEASE RE: READ LAST STEP, I CANNOT TUNE YOUR CAR WITHOUT THIS INFORMATION.

Then I will send you back a custom tune file for your mods.

Save the file to your desktop, it will be, YOUR NAME JRE TUNE.cef

Again open SCT Device Updater, Then, connect your X3 tuner, select Load Custom Tune File, Browse to your tune file, exit when finished.

Connect to your car, Select Program Vehicle, scroll left to Custom Tunes, Select JRE tune and follow the on screen prompts.

I have developed Dyno Proven tunes for all of the Product I sell, So Unless I instruct you to do so Datalogging will NOT be necessary.

If I instruct you to Datalog your car, The best way I found is to use a laptop on the seat, First Open the LiveLink Software then connect the X3 to your laptop, then connect the X3 to the OBDII Port of the car, With the Car RUNNING, Hit the connect button, a list of PIDs will come up, you will have to scroll through them selecting the Items below.

Even thought they may not be named exactly as I listed them, I want you to select the following, but try not to select anything Not listed or doubles of any of the items listed.

You may have to test several PIDs to see which ones work best or work at all on your car.

Once you find a list that works well Save Livelink Configuration file for future use.

Engine RPM - RPM
ECT engine coolant temp – ecteng clt tmp
TPS throttle position or pedal position – acc pdl pos 1s
IAT intake air temp or Air intake temp – intk Airtmp
MAF Mass Air flow Hz – Maffre 125
TIMING spark cylinder 1 – ign Tim Adv4#1cyl
KNOCK RETARD – knk ret
Short Term Fuel Trim bank 1 – stf tri b1
Short Term Fuel Trim bank 2 – stf tri b2
Long Term Fuel Trim bank 1 – ltf tri b1
Long Term Fuel Trim bank 2 – ltf tri b2

Pleas ONLY Select the PIDs Listed, Extra PIDs Slow Down Datalogging and give me useless information.

Names can vary from computer to computer but you get the Idea.

Go find a open road somewhere, 1/2 mile or so long would be great, from a stop drive the car 1/4 throttle up through the gears normally shifting at about 4500 RPM.

Then repeat at about 1/2 throttle to 5500 RPM Speeding is not recommended or necessary 1st and 2nd gear are fine if you do not have the room.

Stop, and Save Datalog As, to your desktop.

Email me the log file along with your Full name, Address phone numbers, And all vehicle information Year, Make, Model, Engine, Trans, and list of performance modifications.

PLEASE RE: READ THIS STEP, I CAN NOT REFINE YOUR TUNE WITHOUT THIS INFORMATION.

If you have other questions about SCT this is the entire FAQ section http://www.sctflash.com/support/inde...goryid=3&nav=0


REMEMBER WHEN YOU PURCHASE YOUR PARTS FROM ME CUSTOM TUNES FOR THOSE PARTS ARE FREE.

Ted.

[2010 Indy Pace Car]

Thank you Ted. Looking forward to receiving the SCT and TB in the mail and then uploading your tune shortly afterwards. I appreciate your outstanding customer service which, for the record, is what brought me on board as a new customer.

[JANNETTYRACING]

Originally Posted by 2010 Indy Pace Car

Thank you Ted. Looking forward to receiving the SCT and TB in the mail and then uploading your tune shortly afterwards. I appreciate your outstanding customer service which, for the record, is what brought me on board as a new customer.

As they say down south, We Aims to Please.

Thanks.

Ted.

[chevy 3]

Dose this work for the v6 also

[JANNETTYRACING]

Originally Posted by chevy 3

Dose this work for the v6 also

No, Sorry No V6 support at this time.

[MG]

So, this tune will cover both engine and A6 tranny?

[NickJRE]

Correct both the Engine and Trans..

[pnltnc1]

Man I'm really wanting you tune my vehicle..just worried about the warrenty.

Originally Posted by JANNETTYRACING

JANNETTY RACING CUSTOM TUNE INSTRUCTIONS

When you Purchase an SCT X3 Hand Held Tuner from me you get 1, 93 Octane Tune For Free for your simple bolt on mods, exclusions apply for cams, superchargers and nitrous.

Additional Tunes with minor changes are available for 50.00 each, i.e. Second tune for 91 Octane.

Your new SCT X3 will come to you Blank, You will need to connect the device to your car and Upload Stock tune file, here is how, plug the device in to your OBDII port, select Program Vehicle, Using the left arrow scroll left to UPLOAD STOCK, it will prompt you to turn on the key, do so and hit select.

Your tuner came with a disc with Free Software called SCT Device Updater software, install this in your home or laptop computer Before you connect the device to your computer.

Then After you install and OPEN SCT Device updater software, you can connect your X3 to your computer, Drivers should install automatically, then Get Stock File, Click Browse, Find your Desktop and Click Save.

Go to your Desktop, there will be 3 files, Select the one with Your VinNumber.sul and email it to me tedj@jannettyracing.com along with your Full name, Address phone numbers, And all vehicle information Year, Make, Model, Engine, Trans, and list of performance modifications.

PLEASE RE READ LAST STEP, I CANNOT TUNE YOUR CAR WITHOUT THIS INFORMATION.

Then I will send you back a custom tune file for your mods.

Save the file to your desktop, it will be, YOUR NAME JRE TUNE.cef

Again open SCT Device Updater, Then, connect your X3 tuner, select Load Custom Tune File, Browse to your tune file, exit when finished.

Connect to your car, Select Program Vehicle, scroll left to Custom Tunes, Select JRE tune and follow the on screen prompts.

I have developed Dyno Proven tunes for all of the Product I sell, So Unless I instruct you to do so Datalogging will NOT be necessary.

If I instruct you to Datalog your car, The best way I found is to use a laptop on the seat, First Open the LiveLink Software then connect the X3 to your laptop, then connect the X3 to the OBDII Port of the car, Then Hit the connect button, a list of PIDs will come up, you will have to scroll through them selecting the Items below.

Even thought they may not be named exactly as I listed them, I want you to select the following, but try not to select anything Not listed or doubles of any of the items listed.

You may have to test several PIDs to see which ones work best or work at all on your car.

Once you find a list that works well Save Configuration file for future use.

Engine RPM
ECT engine coolant temp
TPS throttle position or pedal position
IAT intake air temp or Air intake temp
MAF Mass Air flow, grams per second
TIMING spark cylinder 1
KNOCK RETARD
Short Term Fuel Trim bank 1
Short Term Fuel Trim bank 2
Long Term Fuel Trim bank 1
Long Term Fuel Trim bank 2

Go find a open road somewhere, 1/2 mile or so long would be great, from a stop drive the car 1/4 throttle up through the gears normally shifting at about 4500 RPM.

Then repeat at about 1/2 throttle to 5500 RPM Speeding is not recommended or necessary 1st and 2nd gear are fine if you do not have the room.

Stop, and Save Datalog As to your desktop.

Email me the log files along with your Full name, Address phone numbers, And all vehicle information Year, Make, Model, Engine, Trans, and list of performance modifications.

PLEASE RE READ THIS STEP, I CAN NOT REFINE YOUR TUNE WITHOUT THIS INFORMATION.

If you have other questions about SCT this is the entire FAQ section http://www.sctflash.com/support/inde...goryid=3&nav=0


REMEMBER WHEN YOU PURCHASE YOUR PARTS FROM ME CUSTOM TUNES FOR THOSE PARTS ARE FREE.

Ted.

[2010 Indy Pace Car]

I called my dealership and a tune does NOT void any warranty, or portions thereof, unless the tune or MODS can be shown to have been the direct cause of a failure. Ex. Last week they had a 2010 in that had a SC installed by an aftermarket, non-GM affiliated shop. The crank pulley was whobbling (bad). It was replaced under warranty even though the car had been modified and tuned without any questions.. Association must be shown between what you have modified and what broke or is giving you problems before a warranty is voided, and only then, partially.

Lots of post on this topic. My 2010 Pace only has 1,500 miles. The SCT that you get from Ted, stores your stock tune so that you can replace it should the dealer need to update your ECM via flash. Then, you just reload your Jannettty tune! No issue!!

[siriusdish]

Ted, My Dad wants to get the tune checked for his car b/c of how the plugs where after he gets the TB on,and I have a question? I put the livelink on my Laptop and I seen in a different thread there was a file that has the Banks u want. Where would I load that in livelink? Thank you.

[JANNETTYRACING]

Originally Posted by siriusdish

Ted, My Dad wants to get the tune checked for his car b/c of how the plugs where after he gets the TB on,and I have a question? I put the livelink on my Laptop and I seen in a different thread there was a file that has the Banks u want. Where would I load that in livelink? Thank you.

Go here and enter your serial number and you can down load the SCT LiveLink Software from the next page. http://sctflash.com/tsupdates.php?PN...5&GUD=1&GSER=1

[siriusdish]

Originally Posted by JANNETTYRACING

Go here and enter your serial number and you can down load the SCT LiveLink Software from the next page. http://sctflash.com/tsupdates.php?PN...5&GUD=1&GSER=1

I went there and says Ford Programmer?


http://sctflash.com/tsupdates.php?PN...0&GUD=1&GSER=1 Found it.

[ddunerider]

So if I get one of these tuners...With my Ported TB,BBK intake,Flowmaster AT cat back should i see some good gains ...Like how much will I notice it in the set of my pants..

[JANNETTYRACING]

Originally Posted by siriusdish

I went there and says Ford Programmer?


http://sctflash.com/tsupdates.php?PN...0&GUD=1&GSER=1 Found it.

I just clicked on it and it says GM Tuner 3400

[JANNETTYRACING]

Originally Posted by ddunerider

So if I get one of these tuners...With my Ported TB,BBK intake,Flowmaster AT cat back should i see some good gains ...Like how much will I notice it in the set of my pants..

You will LOVE it I Promise, Different Driving Experience for sure.

[siriusdish]

Do I open this file http://www.jannettyracing.com/2010%20CAMARO.cf3 under "Open Livelink Configuration" ?

[ddunerider]

Originally Posted by JANNETTYRACING

You will LOVE it I Promise, Different Driving Experience for sure.

Can you send me a PM with all the cost for this up grade...Thanks

[siriusdish]

Want to make sure I have it right! He is still waiting for TB, #1 on the list.

[Tonkin Chevrolet]

Book marked for when I am ready


Talk to you soon.

Regards,
Allen English

[pnltnc1]

Thanks Ted! at Jennettyracing.com.

Sent my factory tune to and got intant service. He emailed me his custom tune, loaded the tuner with ease, Just follow Ted's instructions.. Installed tune in my car and wow! The car runs PERFECT with his tune and my mods. Can't wait to go to your shop this summer for the cam install.

Camaro5, Best believe this guy is for real! Thanks Ted.

[Buffnshine]

Originally Posted by ddunerider

So if I get one of these tuners...With my Ported TB,BBK intake,Flowmaster AT cat back should i see some good gains ...Like how much will I notice it in the set of my pants..

Well worth it Don, Teds the one that did mine, car is night and day. Very pleased with it and his customer service is top notch

[Scott@Bjorn3D]

Originally Posted by Buffnshine

Well worth it Don, Teds the one that did mine, car is night and day. Very pleased with it and his customer service is top notch

Are you dyno #'s before or after Ted's Tune?

[Buffnshine]

before

[retired motorcop]

HELP!!!! I downloaded my stock file to the SCT. I have installed the SCT Device Updater on my PC. I open the updater and connect the SCT/X3 into the USB port. When I do this my computer reads "USB Device Not Recognized". Any sugestions? I have tried it in all of the USB Ports with the same results.

[Pace]

Connect the SCT first...then open the software. I have W7 and that worked for me.