Showstopper's Roto-Fab radiator cover fit Cold Air Inductions CAI? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

colemanvoice · 05-04-2011, 12:43 PM

Does anyone know if the Showstopper's radiator cover that is cut to fit the Roto-Fab will fit with the Cold Air Inductions cold air intake? I can tell the one for ADM will not work. I've searched, left v-mail and sent message to Showstoppers. I'm impatient and haven't heard back from Showstoppers yet.

Thanks

*The Stig* · 05-04-2011, 12:58 PM

What does the bend on the intake tube look like? Is it a sharp 90 degree bend or a more gradual one like the Rotofab intake? I asked if my injen would fit the Rotofab one and they said yes, though the gap between the intake and the cover may not be even all the way across.

colemanvoice · 05-04-2011, 01:02 PM

Quote:

Originally Posted by stieger

What does the bend on the intake tube look like? Is it a sharp 90 degree bend or a more gradual one like the Rotofab intake? I asked if my injen would fit the Rotofab one and they said yes, though the gap between the intake and the cover may not be even all the way across.

Thanks stieger. The bend seems to be similar to Rot-Fab's but I'm more concerned with the sensor. That air sensor, what ever it's called, that pluggs into the air tube, seems to be right where the radiator cover would be.

*The Stig* · 05-04-2011, 01:06 PM

Quote:

Originally Posted by colemanvoice

Thanks stieger. The bend seems to be similar to Rot-Fab's but I'm more concerned with the sensor. That air sensor, what ever it's called, that pluggs into the air tube, seems to be right where the radiator cover would be.

Does the sensor come at an angle or does it just jut straight out from the intake tube

Darth_Emma · 05-04-2011, 01:11 PM

showstopper does have one that will work with the CAI intake.

colemanvoice · 05-04-2011, 01:29 PM

Ah-ha! Thanks Darth_Emma, I appreciate that.

stieger, see how the sensor sits? That's what I was worried about. Darth_Emma has a supercharger too, which I don't. So this will work for sure. That's the Roto-Fab radiator cover. The way Showstopper names that piece, leads to a little confusion if you don't have Rot-Fab or ADM.

Now I can order this thing.

Thanks for your help guys. I hope others will be helped by this too.

Darth_Emma · 05-04-2011, 01:32 PM

If you pm showstopper in these forums and tell him what combination you have then he can make sure your radiator cover will work with your parts. He custom makes them if he needs to.

*The Stig* · 05-04-2011, 01:41 PM

Quote:

Originally Posted by Darth_Emma

If you pm showstopper in these forums and tell him what combination you have then he can make sure your radiator cover will work with your parts. He custom makes them if he needs to.

Mhm. He is hooking me up with a hydro-carbon one for my injen.

colemanvoice · 05-04-2011, 01:59 PM

I just got a call back from Pete at Showstopper. He had installed the Roto-Fab radiator cover with the Cold Air Inductions CAI. It does fit. CONFIRMED

Roto-fab 1 · 05-04-2011, 08:53 PM

The Roto-fab radiator cover has mounting brackets which it attaches to via 4 push fasteners. It has 4 recessed areas for the push pins as well as a punch formed area around the radiator cap for good cap access. Ours has a continuous flange on the backside for rigidity.The cover pictured above is not ours. It appears to be identical in shape to ours though. I don't know who makes that one.

*SSE 4 2SS* · 05-04-2011, 09:02 PM

Future reference, the Roto-Fab radiator cover also fits with the TTI/Granatelli Twins Kit...

I would post up a pic but I'm in the process of repainting mine...

05-04-2011, 12:43 PM	#1
colemanvoice ACE5.org - ATL area group Drives: MOTL3Y Join Date: Jan 2009 Location: Cumming GA Posts: 1,021 View My Garage	Showstopper's Roto-Fab radiator cover fit Cold Air Inductions CAI? Does anyone know if the Showstopper's radiator cover that is cut to fit the Roto-Fab will fit with the Cold Air Inductions cold air intake? I can tell the one for ADM will not work. I've searched, left v-mail and sent message to Showstoppers. I'm impatient and haven't heard back from Showstoppers yet. Thanks __________________

05-04-2011, 12:58 PM	#2
The Stig Fireproof Moderator Drives: a PBM camaro Join Date: Aug 2009 Location: Northern VA Posts: 26,590 View My Garage	What does the bend on the intake tube look like? Is it a sharp 90 degree bend or a more gradual one like the Rotofab intake? I asked if my injen would fit the Rotofab one and they said yes, though the gap between the intake and the cover may not be even all the way across. __________________ thanks for the sig Russ

05-04-2011, 01:11 PM	#5
Darth_Emma Psssssssssshhhhhhhhhhhhh! Drives: under contruction Join Date: Nov 2009 Location: Marysville, Ohio Posts: 13,321 View My Garage	showstopper does have one that will work with the CAI intake. __________________

05-04-2011, 01:29 PM	#6
colemanvoice ACE5.org - ATL area group Drives: MOTL3Y Join Date: Jan 2009 Location: Cumming GA Posts: 1,021 View My Garage	Ah-ha! Thanks Darth_Emma, I appreciate that. stieger, see how the sensor sits? That's what I was worried about. Darth_Emma has a supercharger too, which I don't. So this will work for sure. That's the Roto-Fab radiator cover. The way Showstopper names that piece, leads to a little confusion if you don't have Rot-Fab or ADM. Now I can order this thing. Thanks for your help guys. I hope others will be helped by this too. __________________

05-04-2011, 01:32 PM	#7
Darth_Emma Psssssssssshhhhhhhhhhhhh! Drives: under contruction Join Date: Nov 2009 Location: Marysville, Ohio Posts: 13,321 View My Garage	If you pm showstopper in these forums and tell him what combination you have then he can make sure your radiator cover will work with your parts. He custom makes them if he needs to. __________________

05-04-2011, 01:59 PM	#9
colemanvoice ACE5.org - ATL area group Drives: MOTL3Y Join Date: Jan 2009 Location: Cumming GA Posts: 1,021 View My Garage	I just got a call back from Pete at Showstopper. He had installed the Roto-Fab radiator cover with the Cold Air Inductions CAI. It does fit. CONFIRMED __________________

05-04-2011, 08:53 PM	#10
Roto-fab 1 Drives: 2012 zl1 Join Date: May 2009 Location: Arizona Posts: 1,334	The Roto-fab radiator cover has mounting brackets which it attaches to via 4 push fasteners. It has 4 recessed areas for the push pins as well as a punch formed area around the radiator cap for good cap access. Ours has a continuous flange on the backside for rigidity.The cover pictured above is not ours. It appears to be identical in shape to ours though. I don't know who makes that one.

05-04-2011, 09:02 PM	#11
SSE 4 2SS Boosted Moderator Drives: LS-3 429 TT with other odds-n-ends Join Date: Sep 2009 Location: Kyle Tx Posts: 11,646	Future reference, the Roto-Fab radiator cover also fits with the TTI/Granatelli Twins Kit... I would post up a pic but I'm in the process of repainting mine... __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Cold Air Inductions Intake System! ADM Performance Cold Air Scoop! & Packages!	AutoAgenda	V8 Bolt-Ons & Tunes	430	06-10-2013 12:11 PM
Cold Air Inductions (CAI) Intake Info	Sales @ CAI Inc	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	46	04-06-2011 01:27 PM
WTB....Cold Air Inductions CAI and Corsa 14951	crabapple	V8 - Engine, Exhaust, Bolt-Ons, Tuning Equipment	1	10-10-2010 10:14 AM
Cold Air Inductions CAI	SRT10KLLR	V8 - Engine, Exhaust, Bolt-Ons, Tuning Equipment	15	03-22-2010 12:07 PM
LMR CAI vs Cold Air Induction Inc TEST with RESULTS!!	Late Model Racecraft	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	64	01-13-2010 02:33 AM