Introducing slylights - Page 4 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

CamaroFTW · 06-22-2011, 11:21 AM

So is price $179 for all? Do these ship from the US? Do you have fogs in stock?
You say we dont need to use the universal mounts for the Camaro but then how do you install these? I did not see bolt threads on the back of these light?

Elite1 · 06-22-2011, 04:54 PM

no sir that was a intro prices which is no longer foglight assist is in stock

BlackJacket · 06-23-2011, 07:08 AM

If you are unsure if these will fit a Camaro, especially a 5th gen, then why do you post them up on a 5th gen Camaro website? I would suggest making a custom bracket for 5th gens or a complete bolt on replacement set.

Elite1 · 06-23-2011, 08:04 AM

because we know they will work why wouldnt they

CamaroFTW · 06-23-2011, 12:51 PM

I have the ACS T3 ports and they use this bracket to hold the lights. So this is the same 3 hole pattern the stock Camaro has too. So how would your light mount on this when it have no rear holes????

Elite1 · 06-23-2011, 03:37 PM

i understand you question loud and clear All of the 70 mm modules were designed in a way to allow easy custom integration into model cars as well as to easily replace current factory 70 mm (or approx.) fog lights. These lights have very shallow install depth of only 55 mm!
we are willing to do whatever we have to do

CamaroFTW · 06-23-2011, 04:24 PM

But how do you screw the light through the OEM holes?? Your holes on the light are on the side for the bracket and you have no holes in the rear to mount to the OEM plastic holes or the ACS port bracket. Ideally you would make a specific Camaro bracket the goes from the 2 side holes of your light to the 3 OEM holes of the DRL port.

06-23-2011, 07:08 AM	#78
BlackJacket Drives: 2011 Camaro 2LT Cyber Gray Join Date: Apr 2011 Location: Florida Posts: 57	If you are unsure if these will fit a Camaro, especially a 5th gen, then why do you post them up on a 5th gen Camaro website? I would suggest making a custom bracket for 5th gens or a complete bolt on replacement set. __________________ 2011 Chevy Camaro 2LT RS Cyber Gray Modified Camaro's Unite! Share your Camaro at ModifiedCamaro.com

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Introducing...THE ANTI-BLING, Dub.1 Wheels	J@Wheelsboutique	Wheels / Tires	2	03-24-2011 12:46 PM
Introducing the Uber Wool Wash Mitt V2	DetailersDomain	Cosmetic Maintenance: Washing, Waxing, Detailing, Bodywork, Protection	0	02-02-2011 03:25 PM
Introducing the 3 plus 1/ Bulk Section at DD	DetailersDomain	Cosmetic Maintenance: Washing, Waxing, Detailing, Bodywork, Protection	0	01-11-2011 12:13 PM
Introducing AKATA WHEEL SPACERS!!!	vossen wheels	Suspension / Chassis / Brakes	1	09-03-2010 02:34 PM
Introducing AKATA WHEEL SPACERS!!!	vossen wheels	Sponsor Announcements / Giveaways / Contests	0	09-03-2010 02:05 PM

06-22-2011, 11:21 AM	#76
CamaroFTW Drives: 2010 Camaro 2SS/RS-Rally Yellow Join Date: Apr 2010 Location: Palm Bay, FL Posts: 1,295	So is price $179 for all? Do these ship from the US? Do you have fogs in stock? You say we dont need to use the universal mounts for the Camaro but then how do you install these? I did not see bolt threads on the back of these light?

06-22-2011, 04:54 PM	#77
Elite1 Drives: BMW 335i Join Date: Jan 2011 Location: Pinehurst, NC Posts: 171	no sir that was a intro prices which is no longer foglight assist is in stock

06-23-2011, 08:04 AM	#79
Elite1 Drives: BMW 335i Join Date: Jan 2011 Location: Pinehurst, NC Posts: 171	because we know they will work why wouldnt they

06-23-2011, 12:51 PM	#80
CamaroFTW Drives: 2010 Camaro 2SS/RS-Rally Yellow Join Date: Apr 2010 Location: Palm Bay, FL Posts: 1,295	I have the ACS T3 ports and they use this bracket to hold the lights. So this is the same 3 hole pattern the stock Camaro has too. So how would your light mount on this when it have no rear holes????

06-23-2011, 03:37 PM	#81
Elite1 Drives: BMW 335i Join Date: Jan 2011 Location: Pinehurst, NC Posts: 171	i understand you question loud and clear All of the 70 mm modules were designed in a way to allow easy custom integration into model cars as well as to easily replace current factory 70 mm (or approx.) fog lights. These lights have very shallow install depth of only 55 mm! we are willing to do whatever we have to do

06-23-2011, 04:24 PM	#82
CamaroFTW Drives: 2010 Camaro 2SS/RS-Rally Yellow Join Date: Apr 2010 Location: Palm Bay, FL Posts: 1,295	But how do you screw the light through the OEM holes?? Your holes on the light are on the side for the bracket and you have no holes in the rear to mount to the OEM plastic holes or the ACS port bracket. Ideally you would make a specific Camaro bracket the goes from the 2 side holes of your light to the 3 OEM holes of the DRL port.