Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Emblempros
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Engine | Drivetrain | Powertrain Technical Discussions > Camaro V6 LLT Engine, Exhaust, and Bolt-Ons

Camaro V6 LLT Engine, Exhaust, and Bolt-Ons Bolt-Ons | Intakes | Exhaust

Reply
 
Thread Tools
Old 06-16-2011, 12:09 PM   #1
KMPrenger


 
KMPrenger's Avatar
 
Drives: '10 ABM LT/RS, 06 Chevy Colorado
Join Date: May 2009
Location: Jefferson City, Missouri
Posts: 9,316
Lightbulb

Updated 3/17/2013

When posting your results to this thread, please include the following information:

Type and make of dyno: (ex. dynojet model 248x, mustang, etc.)

ODO at the time of the dyno:
Temperature:
Manual/auto:
Gear used(3rd or 4th):
Modification:
Correction used(STD or SAE):
Result:


Results Below.....

Direct link to view this sheet online

https://spreadsheets.google.com/spre...Hc&output=html

Couple quick notes: It seems as though the powertrain loss for the manual is around 16% to possibly 17% while for the automatics, it is more in the 20% - 22% range. We have also noticed over time and through some testing that the V6s (more-so with headers it seems) tend to pick up false knock while on the dyno, thus pulling a few degrees more of timing versus what they are pulling under WOT on the street. If this is true, many of the results could possibly be making a bit more power than shown.

2010-2011 LLT STOCK DYNO
Name:  STOCKDYNO.png
Views: 5402
Size:  129.4 KB

2010-2011 LLT MODDED DYNO (sorted with HP numbers low to high)
Sheet1:
Name:  V6_Dyno1.jpg
Views: 2324
Size:  298.1 KB
Sheet2:
Name:  V6_Dyno2.jpg
Views: 2337
Size:  277.2 KB
Sheet3:
Name:  V6_Dyno3.jpg
Views: 2137
Size:  361.2 KB

2012 LFX MODDED/STOCK DYNO
View: http://www.camaro5.com/forums/showthread.php?t=233394


N2o/TURBO/SC LLT
View: http://www.camaro5.com/forums/showthread.php?t=115679


EDIT: Nov 16th
If you guys see your dyno number on the list and do not see a link next to your name then this mean that I do not have your actual dyno sheet or I can't find it. If you want to further verify your run then please pm me with the location of your dyno sheet.

When you post your dyno numbers try to post as much information as you can. The more information everyone see for your particular dyno run the better we can understand the result The standard information that should accompany with your dyno are as follows:

(Notes below originally written by member "bmorecam")

When we dyno our car there are 2 major component that most dyno use to calculate accurate result. They are the correction factor and temperature(weather station). There are over half of dozen corrections that can be used but here in USA we only use 2, the STD and SAE. Since there seem to be so much confusion surrounding this 2 calculations I will try to make this as simple as I can for you guys that want to know more about these very important factors that is part of every single dyno.

First, lets understand why these corrections was created in the first place. The correction standards were developed to discount the observed horsepower readings taken at different locations and weather conditions. It is obvious that an engine builder in Colorado could not produce as much horsepower as a shop at sea level. There is just less oxygen for the engine to burn at the higher altitude. What are less obvious are the other weather condition effects on the engine. So in order to compensate for this all advertised horsepower is "corrected" to several different industry standards.

SAE:
"SAE (Society of Automotive Engineers), USA. Power is corrected to reference conditions of 29.23 InHg of dry air and 77 F. This SAE standard requires a correction for friction torque.

STD:
STD is Another power correction standard determined by the SAE(society of automotive engineers). Power is corrected to reference conditions of 29.92 InHg of dry air and 60 F. Friction torque is handled in the same way as in the SAE standard."

To sum everything up, both correction factors basically mimic a preset condition which was created by the society of automotive engineers. So... although the SAE correction factor is recognized today as the "standard" correction in the automotive industry, this does not mean reading a dyno number with STD cf is wrong. No matter which correction factor your dyno shop use, you should get an accurate comparison as long as you compare SAE vs SAE and STD vs STD. Never compare a dyno run with two different type of correction.

Quote:
Originally Posted by partymn View Post
I see some pretty good numbers from the V6 crowd, keep em coming.
__________________
IPF Tune, Custom Magnaflow Exhaust, Vararam intake, MACE Ported Manifold, RX Ported TB, "Black Ice" manifold insulator, Elite Catch Can, ZL1 repro wheels, ZL1 Springs, DRL Harness, Front GM GFX, Heritage grill, Street Scene lower grill, NLP Spoiler, ZL1 rockers and much more!

Last edited by KMPrenger; 03-17-2013 at 09:51 PM.
KMPrenger is offline   Reply With Quote
Old 06-16-2011, 12:15 PM   #2
bmorecam
Account Suspended
 
Drives: jealous vendors mad!! HAHA!!
Join Date: Jan 2011
Location: CYBERGMONSTER@GMAIL.COM
Posts: 3,660
Manual or Auto: manual

Mileage at the time of dyno: 5600

Type of dyno: dynojet 248x

Date/Time/Temp: 95*, 38% humidity

3rd/4th gear pull: 4th and 3rd

Modification at the time of dyno: updated trifecta tune, obx long tube with no cats, full exhaust

Dyno result: 264hp 240tq on 4th gear, and 270hp 236tq on 3rd gear


Mileage at the time of dyno: 6200

Type of dyno: dynojet 248x

Date/Time/Temp: 87*, 31% humidity

3rd/4th gear pull: 4th

Modification at the time of dyno: E85 trifecta tune, obx long tube with no cats, full exhaust

Dyno result: 284HP 244TQ on 4th gear

Last edited by bmorecam; 06-16-2011 at 12:36 PM.
bmorecam is offline   Reply With Quote
Old 06-16-2011, 12:30 PM   #3
GoPaul
H-Town Camaro Club
 
GoPaul's Avatar
 
Drives: 2010 Black Camaro 2LT RS M6
Join Date: Apr 2010
Location: Katy, TX
Posts: 931
Manual or Auto: manual

Mileage at the time of dyno: ~7000
Type of dyno: dynojet

Date/Time/Temp: 87.7*, 26% humidity

3rd/4th gear pull: 4th

Modification at the time of dyno: Injen Powerflo CAI

Dyno result: 257hp 237tq

Hope to get an update soon now that the Trifecta tune, Vararam & MRT v2 are all installed.
__________________
Best Timeslip: <Time Slip> Latest Dyno (w. Injen only): <Dyno Sheet> Journal: <Here>
GoPaul is offline   Reply With Quote
Old 06-16-2011, 01:00 PM   #4
KMPrenger


 
KMPrenger's Avatar
 
Drives: '10 ABM LT/RS, 06 Chevy Colorado
Join Date: May 2009
Location: Jefferson City, Missouri
Posts: 9,316
Nice...but there is an existing V6 dyno thread here.

It just always gets lost because it was never stickied...

EDIT:

Looks like its been tried 3 times already:

http://www.camaro5.com/forums/showthread.php?t=44635

http://www.camaro5.com/forums/showthread.php?t=57377

http://www.camaro5.com/forums/showthread.php?t=97831
__________________
IPF Tune, Custom Magnaflow Exhaust, Vararam intake, MACE Ported Manifold, RX Ported TB, "Black Ice" manifold insulator, Elite Catch Can, ZL1 repro wheels, ZL1 Springs, DRL Harness, Front GM GFX, Heritage grill, Street Scene lower grill, NLP Spoiler, ZL1 rockers and much more!
KMPrenger is offline   Reply With Quote
Old 06-16-2011, 01:19 PM   #5
bmorecam
Account Suspended
 
Drives: jealous vendors mad!! HAHA!!
Join Date: Jan 2011
Location: CYBERGMONSTER@GMAIL.COM
Posts: 3,660
Lets start over and sticky it this time so it wont get lost Dyno numbers can be very informative. We are the only ones that dont have it up top "sticky"


come on mods..
bmorecam is offline   Reply With Quote
Old 06-16-2011, 01:26 PM   #6
TJ91
:chevy:
 
TJ91's Avatar
 
Drives: 2LT/RS
Join Date: Jun 2008
Location: Toronto
Posts: 12,493
this needs to be sticky'd asap, ill bump the $*** out of this thread until it does lol
__________________
CAMARO
Consult your doctor before taking Camaro
Side effects include Sudden increase in Heart Rate, Insomnia and occasional hallucinations
If you experience Permagrin exceeding 4 hours after taking Camaro, seek immediate Camaro5 Help
CAMARO Bringing excitment back into the Garage
TJ91 is offline   Reply With Quote
Old 06-16-2011, 02:27 PM   #7
BlkThndr66
I'm not car-ist
 
BlkThndr66's Avatar
 
Drives: '10 RY 2LT Camaro '96 Mustang Cobra
Join Date: Dec 2010
Location: Chicagoland
Posts: 227
Quote:
Originally Posted by TJ91 View Post
this needs to be sticky'd asap, ill bump the $*** out of this thread until it does lol

__________________
35% tint, faded gill stripes, yellow stitching, black spoiler, decklid stripes
To-Do List:
Oracle HALO multicolor headlight + fogs kit; Bumblebee striping kit; Flowmaster 3-chamber cat-back; Roto-Fab Intake.
Team LLT-M6
BlkThndr66 is offline   Reply With Quote
Old 06-16-2011, 02:31 PM   #8
TJ91
:chevy:
 
TJ91's Avatar
 
Drives: 2LT/RS
Join Date: Jun 2008
Location: Toronto
Posts: 12,493
Quote:
Originally Posted by BlkThndr66 View Post

were going to need some serious clean up in this thread by the time it ever gets stickied
__________________
CAMARO
Consult your doctor before taking Camaro
Side effects include Sudden increase in Heart Rate, Insomnia and occasional hallucinations
If you experience Permagrin exceeding 4 hours after taking Camaro, seek immediate Camaro5 Help
CAMARO Bringing excitment back into the Garage
TJ91 is offline   Reply With Quote
Old 06-16-2011, 02:40 PM   #9
bmorecam
Account Suspended
 
Drives: jealous vendors mad!! HAHA!!
Join Date: Jan 2011
Location: CYBERGMONSTER@GMAIL.COM
Posts: 3,660
as long as it get stickied I will clean the house up really good Maybe we can set it up the same way how the v6 1/4 mile thread is setup. Everybody post, and I or whoever can take the job to edit everything and post in the 1st top post. Im not too crazy to be the one to take care of the dyno thread but I will do it if I have to.
bmorecam is offline   Reply With Quote
Old 06-16-2011, 10:35 PM   #10
KMPrenger


 
KMPrenger's Avatar
 
Drives: '10 ABM LT/RS, 06 Chevy Colorado
Join Date: May 2009
Location: Jefferson City, Missouri
Posts: 9,316
Just need to combine this thread with one or two of the others...sticky it, and good to go...

Cept I do like the idea of the original post being able to be updated so that we can easily see numbers at a glance. Looking down through post after post takes time that most people just won't do. They will look at the first few and just assume those are the numbers...when in reality we are now getting bigger numbers than ever (thanks to the Vararam, new tune, and E85 tune)
__________________
IPF Tune, Custom Magnaflow Exhaust, Vararam intake, MACE Ported Manifold, RX Ported TB, "Black Ice" manifold insulator, Elite Catch Can, ZL1 repro wheels, ZL1 Springs, DRL Harness, Front GM GFX, Heritage grill, Street Scene lower grill, NLP Spoiler, ZL1 rockers and much more!
KMPrenger is offline   Reply With Quote
Old 06-17-2011, 08:05 AM   #11
bmorecam
Account Suspended
 
Drives: jealous vendors mad!! HAHA!!
Join Date: Jan 2011
Location: CYBERGMONSTER@GMAIL.COM
Posts: 3,660
Quote:
Originally Posted by KMPrenger View Post
Just need to combine this thread with one or two of the others...sticky it, and good to go...

Cept I do like the idea of the original post being able to be updated so that we can easily see numbers at a glance. Looking down through post after post takes time that most people just won't do. They will look at the first few and just assume those are the numbers...when in reality we are now getting bigger numbers than ever (thanks to the Vararam, new tune, and E85 tune)
Already thought of that and already started I will continue working on putting everyone's dyno together today.

If you never posted your dyno numbers in the older "post your dyno" threads than please do.. so I can make sure that I have your dyno numbers.
bmorecam is offline   Reply With Quote
Old 06-17-2011, 08:26 AM   #12
Blade


 
Blade's Avatar
 
Drives: 2012 Camaro 2SS SIM RS
Join Date: Dec 2009
Location: Charlotte
Posts: 4,632
Send a message via AIM to Blade
I sent a PM to 2 of the mods requesting a sticky for this thread.
__________________
Blade is offline   Reply With Quote
Old 06-17-2011, 08:36 AM   #13
bmorecam
Account Suspended
 
Drives: jealous vendors mad!! HAHA!!
Join Date: Jan 2011
Location: CYBERGMONSTER@GMAIL.COM
Posts: 3,660
thank you blade hopefully we wont lose this thread this time. I cant belive this was not in the sticky by others before.
bmorecam is offline   Reply With Quote
Old 06-17-2011, 09:48 AM   #14
KMPrenger


 
KMPrenger's Avatar
 
Drives: '10 ABM LT/RS, 06 Chevy Colorado
Join Date: May 2009
Location: Jefferson City, Missouri
Posts: 9,316
bmorecam!!

Oh, and you might want to change the "E95" tune to "E85" lol.
__________________
IPF Tune, Custom Magnaflow Exhaust, Vararam intake, MACE Ported Manifold, RX Ported TB, "Black Ice" manifold insulator, Elite Catch Can, ZL1 repro wheels, ZL1 Springs, DRL Harness, Front GM GFX, Heritage grill, Street Scene lower grill, NLP Spoiler, ZL1 rockers and much more!
KMPrenger is offline   Reply With Quote
Old 06-17-2011, 10:54 AM   #15
bmorecam
Account Suspended
 
Drives: jealous vendors mad!! HAHA!!
Join Date: Jan 2011
Location: CYBERGMONSTER@GMAIL.COM
Posts: 3,660
Quote:
Originally Posted by KMPrenger View Post
bmorecam!!

Oh, and you might want to change the "E95" tune to "E85" lol.
Oh.. crap thank you prenger.. will have to fix that asap
bmorecam is offline   Reply With Quote
Old 06-18-2011, 12:02 AM   #16
SDCamaro10

 
SDCamaro10's Avatar
 
Drives: 2010 Camaro 1LT RJT
Join Date: Feb 2010
Location: San Diego, CA
Posts: 1,963
__________________
SDCamaro10 is offline   Reply With Quote
Old 06-18-2011, 09:25 AM   #17
PercyJWellingtonIII
Account Suspended
 
Drives: pontiac
Join Date: Feb 2011
Location: Md
Posts: 1,512
450 rw hp? ....stock.
PercyJWellingtonIII is offline   Reply With Quote
Old 06-18-2011, 06:36 PM   #18
Blade


 
Blade's Avatar
 
Drives: 2012 Camaro 2SS SIM RS
Join Date: Dec 2009
Location: Charlotte
Posts: 4,632
Send a message via AIM to Blade
Manual or Auto: Automatic

Mileage at the time of dyno: 20,500 approx

3rd/4th gear pull: 3rd

Type of dyno and Model: Dynojet

Date/Time/Temp: 5/16/2011/5:59 PM/HUMID (Can't remember lol, but HUMID)

Modification at the time of dyno: See sig

Dyno result: 262 RHP & 247 RTQ

Done at Precision Dyno, N. Belmont, NC 980-522-0839
__________________
Blade is offline   Reply With Quote
Old 06-18-2011, 08:35 PM   #19
bmorecam
Account Suspended
 
Drives: jealous vendors mad!! HAHA!!
Join Date: Jan 2011
Location: CYBERGMONSTER@GMAIL.COM
Posts: 3,660
Quote:
Originally Posted by Blade View Post
Manual or Auto: Automatic

Mileage at the time of dyno: 20,500 approx

3rd/4th gear pull: 3rd

Type of dyno and Model: Dynojet

Date/Time/Temp: 5/16/2011/5:59 PM/HUMID (Can't remember lol, but HUMID)

Modification at the time of dyno: See sig

Dyno result: 262 RHP & 247 RTQ

Done at Precision Dyno, N. Belmont, NC 980-522-0839
Almost as same as my number. I dynoed 270 on 3rd gear, and 264 on 4th gear with vince's newest tune, long tube headers and exhaust. If I had an auto my 3rd gear run probably would of been very close to yours.

It seem more of us actually dyno lower than there are peoples that dyno high on dynojet. Your dyno number is just another indication that our stock car would have dynoed in around 230-240.

Your place wouldn't happen to have dynojet model 248x now would it??
bmorecam is offline   Reply With Quote
Old 06-18-2011, 09:00 PM   #20
Blade


 
Blade's Avatar
 
Drives: 2012 Camaro 2SS SIM RS
Join Date: Dec 2009
Location: Charlotte
Posts: 4,632
Send a message via AIM to Blade
Quote:
Originally Posted by bmorecam View Post
Almost as same as my number. I dynoed 270 on 3rd gear, and 264 on 4th gear with vince's newest tune, long tube headers and exhaust. If I had an auto my 3rd gear run probably would of been very close to yours.

It seem more of us actually dyno lower than there are peoples that dyno high on dynojet. Your dyno number is just another indication that our stock car would have dynoed in around 230-240.

Your place wouldn't happen to have dynojet model 248x now would it??
No idea......but it's in ground if that helps.
__________________
Blade is offline   Reply With Quote
Old 06-18-2011, 09:12 PM   #21
bmorecam
Account Suspended
 
Drives: jealous vendors mad!! HAHA!!
Join Date: Jan 2011
Location: CYBERGMONSTER@GMAIL.COM
Posts: 3,660
Quote:
Originally Posted by Blade View Post
No idea......but it's in ground if that helps.
I bet your shop have the 248. Almost everybody that dyno low seem to be from dynojet 248 model.

Even the SS(L99) guys that dyno low 295-310 stock seem to be from the 248 model.

Most shops now use the 224 and 424 on the ground dyno.

Thank you for posting blade.
bmorecam is offline   Reply With Quote
Old 06-27-2011, 07:11 PM   #22
PoorMansCamaro
n00b
 
PoorMansCamaro's Avatar
 
Drives: Really Slow
Join Date: Apr 2010
Location: Las Vegas
Posts: 53,839
Here's a pic from my most recent dyno. Doesn't show TQ, which sucks, but better then nothing, I guess. Probably won't do another until summer is over.

I drive a manual. About 15000 miles at the time of the dyno and 85 degrees outside. This pic shows 270hp with a base run without nitrous, and 324hp with a 55shot. List of mods are in my sig.

Oh, and 4th gear pull.

__________________
PoorMansCamaro is offline   Reply With Quote
Old 06-27-2011, 09:13 PM   #23
KMPrenger


 
KMPrenger's Avatar
 
Drives: '10 ABM LT/RS, 06 Chevy Colorado
Join Date: May 2009
Location: Jefferson City, Missouri
Posts: 9,316
bmorecam...if its too much trouble don't worry about it..but If you can sort the results into stock and modified sections, and then within those, list the highest HP ones first, and then on down from there.

I think that would make it very easy to read.

Just my thoughts! Good stuff here.
__________________
IPF Tune, Custom Magnaflow Exhaust, Vararam intake, MACE Ported Manifold, RX Ported TB, "Black Ice" manifold insulator, Elite Catch Can, ZL1 repro wheels, ZL1 Springs, DRL Harness, Front GM GFX, Heritage grill, Street Scene lower grill, NLP Spoiler, ZL1 rockers and much more!
KMPrenger is offline   Reply With Quote
Old 06-27-2011, 09:17 PM   #24
bmorecam
Account Suspended
 
Drives: jealous vendors mad!! HAHA!!
Join Date: Jan 2011
Location: CYBERGMONSTER@GMAIL.COM
Posts: 3,660
will do prenger
bmorecam is offline   Reply With Quote
Old 06-27-2011, 09:18 PM   #25
KMPrenger


 
KMPrenger's Avatar
 
Drives: '10 ABM LT/RS, 06 Chevy Colorado
Join Date: May 2009
Location: Jefferson City, Missouri
Posts: 9,316
dang...you responded fast.

You must be on here as much as me...maybe. lol j/k.
__________________
IPF Tune, Custom Magnaflow Exhaust, Vararam intake, MACE Ported Manifold, RX Ported TB, "Black Ice" manifold insulator, Elite Catch Can, ZL1 repro wheels, ZL1 Springs, DRL Harness, Front GM GFX, Heritage grill, Street Scene lower grill, NLP Spoiler, ZL1 rockers and much more!
KMPrenger is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Roto-fab CAI dyno results Roto-fab 1 Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons 101 03-06-2014 10:56 AM
Dyno numbers are in after heads,Maggie install papabearcamaro Forced Induction - V8 17 05-14-2011 08:36 PM
Some L99 Dyno Numbers JLBIII Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons 1 02-20-2011 01:34 AM
ls3 mustang dyno numbers 8secpumpgas Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons 6 06-16-2010 12:38 AM
dyno numbers for my build are in (cam + nitrous) mark_p Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons 5 09-10-2009 10:22 AM


All times are GMT -5. The time now is 11:36 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.