Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Technical Camaro Topics > Wheels and Tires Talk Sponsored by The Tire Rack

Wheels and Tires Talk Sponsored by The Tire Rack Discuss issues related to wheels and tires

Reply
 
Thread Tools
Old 07-01-2011, 04:41 AM   #1
Sgt_Snuffy
 
Drives: 2010 1SS/RS Red Jewel
Join Date: Aug 2010
Location: Georgia
Posts: 4
Rear wheel offset

I'm trying to buy a set of winter wheels/tires for my SS. The problem here is that I'm out of the country at the moment. I have to buy everything and get them mounted without being able to make sure things turn out right. In a couple of months the car will be shipped to Germany. Once it gets there it'll be inspected. If the wheels extend out beyond the fender by any amount it'll fail. So the big question is can I get 10 inch rims on the car without this happening? Is there anyone here willing to set a straight edge or piece of plywood up against a Foose Lgend or an AM Torque thrust M?

From what I've gethered from searching around the AM Torque has a 34mm offset and the Foose has a 40. The stock wheel has a 40mm also? I believe the AMs will stickout too much but the Foose wheels are a possibility.

Thanks in advance
Sgt_Snuffy is offline   Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Setting up an IRS/Drivetrain for Drag Racing Kyle2k Suspension / Brakes / Chassis 44 06-05-2010 09:17 PM
Im sure this has been asked before.. But forgive my innocence :) gmag21 Suspension / Brakes / Chassis 23 02-21-2010 10:29 PM
Suspension guys out there - lets talk wheel hop Crowley Suspension / Brakes / Chassis 14 10-09-2009 12:06 AM


All times are GMT -5. The time now is 01:57 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.