Katech 2010+ Camaro heater hose relocation kit - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Katech · 08-01-2011, 04:17 PM

In an effort to clean up the engine compartment and show off our Katech valve covers we made this simple heater hose relocation kit using some quality Parker rubber hose. We've made this kit available to the public and can be found on our website here:
http://store.katechengines.com/heate...-kit-p273.aspx

We've also made a couple other hoses, lines that will be announced shortly, but you can see in our photo above.

JUISSD · 08-01-2011, 06:31 PM

No trimming of the hoses required? Shove them on and go?

Katech · 08-02-2011, 07:27 AM

Quote:

Originally Posted by JUISSD

No trimming of the hoses required? Shove them on and go?

Correct. We cut them to the proper length here at Katech.

BigRed585Lbs · 08-02-2011, 10:15 AM

Good deal! Price-wise, too! Beats those other $140 sets.

Katech · 08-09-2011, 09:54 AM

Fuel feed line has been released:

http://store.katechengines.com/fuel-feed-line-p275.aspx

Katech · 09-21-2011, 01:23 PM

EVAP CPS cleanup line is available:
http://store.katechengines.com/evap-line-p283.aspx

Now the package is complete.

CausticGuy · 09-21-2011, 06:13 PM

Nice looking stuff!!

BowlingSS · 09-21-2011, 07:05 PM

Looks good but if you use the engine cover it is all covered up anyway.

Bill

tarheel34 · 09-21-2011, 07:44 PM

I know I read that on the other kit available you have to remove the intake manifold (I think anyway). Do you have to do anything like that with this kit?

mikeyroche · 09-21-2011, 08:53 PM

Quote:

Originally Posted by Katech

Fuel feed line has been released:

http://store.katechengines.com/fuel-feed-line-p275.aspx

I bought your heater hose relocation kit and it's fantastic. I'm trying to install Corvette fuel rail covers and am told I need to change the fuel delivery lines as well. Any suggestions

Darkstar November · 09-21-2011, 08:58 PM

sorry wrong thread, i jump back and forth to fast

Darkstar November · 09-21-2011, 09:00 PM

kits is very nice though, we love the look of your relocation brackets for the coils on eriks car, def a great touch to clean up the engine bay

DCC1464 · 09-21-2011, 10:25 PM

hehe i read the first post and though " o' great another rip-off i can go to autozone and do this for a bout 40 bucks" and decided to see how bad of a deal your running
MAN WAS I WRONG!
i will def go with your kit when i do this due to the simple fact that its cheap and i dont have to worry about messing up the length

caverman · 09-22-2011, 08:27 AM

Nice!

I did my own HH relocation because these weren't available at the time but had they been I would've gone with this one. Good price on that kit.

jamesc1123 · 09-22-2011, 02:06 PM

eegads...you guys are cheaters! The much much less expensive heater hose clean up kit and oh by the way you just happen to show some GORGEOUS valve covers and coil relocation brackets! It all looks great, and coming from a race bred company, me wants!

Katech · 09-22-2011, 02:45 PM

Thanks guys

ducatisl · 09-22-2011, 03:42 PM

No offense to TechAFX, we all gotta make a living, but if a company such as Katech has a less costly product, with very honest pricing (like Caverman and many others, I did the Gates hose swap for about $40), so jeezus, it's Katech, "THE" C5R guys of all companies...it's a no brainer.

Plus I might add, if you plan on using a Nitrous Outlet plate with the nicely fitting hardlines, a TechAFX install requires rotating the fuel rail, thus making the plate install a bit...different...oh well, not such a big deal as I'm sure this time next year I'll have aftermarket fuel rails anyways LOL

08-01-2011, 04:17 PM	#1
Katech Drives: C6 Z06 Join Date: Nov 2009 Location: Clinton Twp., MI Posts: 95	Katech 2010+ Camaro heater hose relocation kit In an effort to clean up the engine compartment and show off our Katech valve covers we made this simple heater hose relocation kit using some quality Parker rubber hose. We've made this kit available to the public and can be found on our website here: http://store.katechengines.com/heate...-kit-p273.aspx We've also made a couple other hoses, lines that will be announced shortly, but you can see in our photo above.

08-01-2011, 06:31 PM	#2
JUISSD Drives: 2010 White/IOM 2SS/RS M6 Join Date: Jul 2010 Location: Houston, TX Posts: 1,206	No trimming of the hoses required? Shove them on and go? __________________ 2010 White/IOM Camaro 2SS/RS M6

08-02-2011, 10:15 AM	#4
BigRed585Lbs Drives: 2007 Tahoe and 2013 Sierra Z60 4x4 Join Date: Jul 2010 Location: By Marion, MS Posts: 800	Good deal! Price-wise, too! Beats those other $140 sets. __________________ The Cheap-*ss Modder & Thread Killer The Realist says, "The glass is too large". 32 Dump Club Member

09-21-2011, 07:05 PM	#8
BowlingSS Camaro Owner Since 1987 Drives: 2011 2SS/RS L99 RJT Join Date: Jun 2006 Location: Lawrenceville, GA Posts: 1,916	Looks good but if you use the engine cover it is all covered up anyway. Bill __________________ 2011 Camaro 2SS/RS L99 RJT CAI, Inc. Cold Air Induction;ADM Scoop Rx Catch Can;Rx Breather;Roto-Fab Washer Container VMax Ported RJT Throttle Body XSPower Headers and XSPower 3" Exhaust System Elite Engineering Tunnel Brace, Gorilla Wheel Lock System; Tinted Windows 35%;EFILive Tune

09-21-2011, 07:44 PM	#9
tarheel34 Go Heels!!! Drives: 2010 Camaro 2SS/RS Join Date: May 2010 Location: WV Posts: 264	I know I read that on the other kit available you have to remove the intake manifold (I think anyway). Do you have to do anything like that with this kit? __________________ Team L99 2010 Summit White 2SS/RS L99: TSP 1 7/8 LTs - Off-Road Pipes \| Tuned By BLUECAT \| CAI Cold Air Intake \| ADM Race Scoop \| SLP UD Pulley \| VMAX Throttle Body \| Magnaflow X-Pipe \| Muffler Delete \| SLP 160* T-Stat \| MSD Wires

08-09-2011, 09:54 AM	#5
Katech Drives: C6 Z06 Join Date: Nov 2009 Location: Clinton Twp., MI Posts: 95	Fuel feed line has been released: http://store.katechengines.com/fuel-feed-line-p275.aspx

09-21-2011, 01:23 PM	#6
Katech Drives: C6 Z06 Join Date: Nov 2009 Location: Clinton Twp., MI Posts: 95	EVAP CPS cleanup line is available: http://store.katechengines.com/evap-line-p283.aspx Now the package is complete.

09-21-2011, 06:13 PM	#7
CausticGuy Drives: 2010 Chevrolet Camaro SS/RS Join Date: Apr 2011 Location: Norton Shores Posts: 166	Nice looking stuff!!

09-21-2011, 08:58 PM	#11
Darkstar November Drives: 2011 Mustang GT Join Date: Jun 2011 Location: south florida Posts: 494	sorry wrong thread, i jump back and forth to fast

09-21-2011, 09:00 PM	#12
Darkstar November Drives: 2011 Mustang GT Join Date: Jun 2011 Location: south florida Posts: 494	kits is very nice though, we love the look of your relocation brackets for the coils on eriks car, def a great touch to clean up the engine bay

09-21-2011, 10:25 PM	#13
DCC1464 Emerald Coast Camaros Drives: '11 SS/RS CGM Join Date: Dec 2010 Location: Mary Esther,Florida Posts: 683 View My Garage	hehe i read the first post and though " o' great another rip-off i can go to autozone and do this for a bout 40 bucks" and decided to see how bad of a deal your running MAN WAS I WRONG! i will def go with your kit when i do this due to the simple fact that its cheap and i dont have to worry about messing up the length __________________ Here is My build thread

09-22-2011, 08:27 AM	#14
caverman Drives: '69 SS Convertible Join Date: May 2009 Location: DFW, TX Posts: 6,312	Nice! I did my own HH relocation because these weren't available at the time but had they been I would've gone with this one. Good price on that kit. __________________ *-2010 Camaro* 2SS \| M6 \| VR w/White Stripes \| 1 3/4" KOOKS - 3" Magnaflow \| LPE 3.91 gears \| ADM tuned \| Halltech w/ADM Scoop \| Spohn/BMR Trailing Arm/Toe Rod \| BC Coilovers\| Pedders FE4 ZL1 swaybars \| Cradle/Diff/Radius Rod bushings \| VMax TB \| Morimoto Projectors \| MGW shifter \| Red Calipers Build Journal

09-22-2011, 02:06 PM	#15
jamesc1123 Drives: CGM 2SS RS w/ white stripes Join Date: Jul 2008 Location: Clarksville, TN Posts: 170 View My Garage	eegads...you guys are cheaters! The much much less expensive heater hose clean up kit and oh by the way you just happen to show some GORGEOUS valve covers and coil relocation brackets! It all looks great, and coming from a race bred company, me wants! __________________ LGM G6X3 cam, LGM headers, Vararam intake, throttle body and intake ported by ADM Performance, 477 hp 454 ft-lb tq, tuned by PCMforLess, Pfadt sport sway bars, BMR trailing arms

09-22-2011, 02:45 PM	#16
Katech Drives: C6 Z06 Join Date: Nov 2009 Location: Clinton Twp., MI Posts: 95	Thanks guys

09-22-2011, 03:42 PM	#17
ducatisl Emerald Coast Camaros Drives: 2010 2SS 6m Join Date: Mar 2010 Location: Fort Walton Beach, FL Posts: 501 View My Garage	No offense to TechAFX, we all gotta make a living, but if a company such as Katech has a less costly product, with very honest pricing (like Caverman and many others, I did the Gates hose swap for about $40), so jeezus, it's Katech, "THE" C5R guys of all companies...it's a no brainer. Plus I might add, if you plan on using a Nitrous Outlet plate with the nicely fitting hardlines, a TechAFX install requires rotating the fuel rail, thus making the plate install a bit...different...oh well, not such a big deal as I'm sure this time next year I'll have aftermarket fuel rails anyways LOL __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
5th Gen Suspension -- The Book	JusticePete	Suspension / Brakes / Chassis	138	05-09-2013 03:58 PM
SEMA Show 2010 - New Camaro Products Showcase - pictures & descriptions!	Sean@Phastek	Camaro Photos \| Spyshots \| Video \| Media Gallery	59	06-23-2011 12:56 PM