![]() |
|
|||||||
| Homepage | Garage | Wiki | Register | Members List | Social Groups | Calendar | Search | Today's Posts | Mark Forums Read |
| 5th Gen Camaro SS LS LT General Discussions General 5th generation Camaro topics not covered by other subforums. |
![]() |
|
|
Thread Tools |
|
|
#1 |
|
Black on Black on Black
|
I was putting out of my garage (tight fit for my car) not going fast but i wasn't looking to much at where i was going because i was watching my cats and dogs to make sure i didn't hit them, apparently i cut it to early and hit the column that seperates the 2 garage doors.
![]() ![]() Shadoww (my car) lost the fight. Also my AACstyle side marker was involved and lost as well. I am taking my car to get an estimate tomorrow morning and will also be contacting Johnathan from AAC to ask how one side marker will be to replace. I have never been involved in a self inflicted accident like this before and was wondering how much you guys think it would be to have it fixed. It's gouged in there pretty deep and by the side marker it is bent in where the plastic bumper seems to have bowed in. ![]() Any advice or anything would be great. I'm so frustrated right now. ![]()
__________________
|
|
|
|
|
|
#2 |
![]() Drives: RS (11/15/10) Join Date: Mar 2010
Location: Baton Rouge,LA
Posts: 578
|
Sorry for your loss, I cant tell you a estimate . Although my brother did once do this in his lol stang.
I may be the only one, but in a odd way I think the pattern under that lighting looks kinda cool.
__________________
TEAM LLT
Nov.15th 2010 -- Check out my build thread http://www.camaro5.com/forums/showthread.php?t=116235 |
|
|
|
|
|
#3 |
|
..............
|
Relax bro. It will get fixed
I cant help you with an estimate though. |
|
|
|
|
|
#4 |
![]() ![]() ![]() ![]() ![]() ![]() Drives: 2011 Chevrolet Camaro SS/RS Join Date: Dec 2010
Location: Between the 45th and 49th Parallels
Posts: 1,899
|
A volume-based shop will probably want to replace the bumper cover, and do a couple of hours of work on the fender, and they'll have to order a new set of side markers since you've swapped your for AAC units. If I had to ballpark guess, I'd say you're in it for $500-$600 depending on the price of the bumper cover and side markers.
On the plus side, you will probably end up with a bumper cover that matches the hood and fenders better than the factory bumper cover! |
|
|
|
|
|
#5 |
|
OKCamaros
Drives: '13 WRX STi Join Date: Mar 2010
Location: Muskogee, OK
Posts: 4,623
|
that sucks man!!
Hope you get her all fixed soon! |
|
|
|
|
|
#6 |
|
SoCal Race Team #10
|
I sadly have no advice, but this unfortunately just sealed the deal for me on NOT parking mine in the garage. I spent a good chunk of time yesterday rearranging my vehicles and some of the storage in the garage... and no matter what I do, the Camaro is just a bit too long and wide to fit in the space I have :( This definitely reinforces my purchase of a cover for outside instead.
Sorry for the damage! I hope someone on here can lend some advice and you get it fixed up soon!!
__________________
"You wanna lay the fate of the world on the kid's Camaro? That's cool."
2012 CTH 2SS/RS Current mods: CAI intake, SLP exhaust Future mods: too many to list Tundra CrewMax SR5, TRD, 5.7L V8, 2" Lift, 381 HP; 401 ft lb |
|
|
|
|
|
#7 | |
|
Black on Black on Black
|
Quote:
My bumper cover doesn't have the fog lights right now should i get a bumper cover with fog lights since i was planning on having it installed later anyway?
__________________
|
|
|
|
|
|
|
#8 |
|
Proud owner of Litho #195
Drives: 2011 CGM 2LT/RS Join Date: Sep 2010
Location: Oklahoma
Posts: 2,940
|
That will leave a sinking feeling in your gut....sorry to hear about this.
__________________
Mods:http://www.camaro5.com/forums/showthread.php?p=3139029#post3139029
Team LLT Social Group Link:http://www.camaro5.com/forums/group.php?groupid=256 |
|
|
|
|
|
#9 |
|
SoCal Race Team #10
|
you could always hold out and get the ZL1 front fascia - my friend at my dealership says they're only going to be about 300 for the front bumper... but there's more on the inside that he didn't quote me so I'm not sure what the total would end up being - so don't quote me on the 300 >.>
__________________
"You wanna lay the fate of the world on the kid's Camaro? That's cool."
2012 CTH 2SS/RS Current mods: CAI intake, SLP exhaust Future mods: too many to list Tundra CrewMax SR5, TRD, 5.7L V8, 2" Lift, 381 HP; 401 ft lb |
|
|
|
|
|
#10 | |
|
Account Suspended
Drives: 10' IOM 2SS/RS, 13' GB Shelby GT500 Join Date: Sep 2010
Location: Sherwood Park, AB
Posts: 2,196
|
Quote:
![]() Save the performance looks for the performance model. Also to the OP I know exactly how you feel I need a new rear bumper, my door has been keyed, dented. |
|
|
|
|
|
|
#11 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: COTW 8/29/11 2010 CAMARO Join Date: Jul 2009
Location: hickville NC USA
Posts: 9,082
|
I know you can order just one marker from AAC, and you dont need to buy new cover they can repair it and paint the 500-600 is a good number might be a little higher depends on where you bring it too.
|
|
|
|
|
|
#12 | |
![]() ![]() ![]() ![]() ![]() ![]() Drives: 2011 Chevrolet Camaro SS/RS Join Date: Dec 2010
Location: Between the 45th and 49th Parallels
Posts: 1,899
|
Quote:
Otherwise, if they know they can get away with throwing on a $150 aftermarket cover, and they've got a discount with their aftermarket parts supplier, then yeah, they'll probably just replace it. If you wanted fog lights, I'd assume they'd wire right in, but you'd have to work it out with the shop to order the bumper cover for the fog lights versus non, and have them either order, or supply them with all the fog light hardware, or just have them leave the holes empty and you install the lights at a later time. |
|
|
|
|
|
|
#13 |
|
OFF THE HOOK
|
Wow, cheap estimates for sure!
$1100.00
R&R Time 1.5 Hours (Includes Fog Lamps, Upper Grill, Lower Grill, Shock Absorber, DRL Harness If applicable) Refinish Time 1.8 Hours (Front Bumper) R&I Lt Front Wheel Well Liner .2 Hours R&I Lt Front Wheel .1 Hours R&I Lt Front Side Marker .2 Hours Repair Lt Front Fender 2.5 to 3.0 Hours Refinish Lt Front Fender 1.4 Hours 2 Stage Final Cut & Buff .2 hours Replace New OEM CAMARO Emblem $35.96 New AAC Sidemarker $150.00?? Your lucky car is black, any other color you would have to start blending into panels if you want a decent color match. Black you never have to blend, BLACK IS BLACK! Total Cost Reputable Shop $1100.00 |
|
|
|
|
|
#14 | |
![]() ![]() ![]() ![]() ![]() ![]() Drives: 2011 Chevrolet Camaro SS/RS Join Date: Dec 2010
Location: Between the 45th and 49th Parallels
Posts: 1,899
|
Quote:
Are you really going to remove the wheel and liner, or mask it off (assuming R&I the wheel isn't necessary to remove the front bumper cover)? What labor and paint/material rates are you using? I work in healthcare, yet I know a thing or two about "reputable automotive repair shops" --in most cases, it means they produce estimates that make sure that everything on the car gets R&I'd, and painted twice. That's nice, but what quality of work are they putting out? |
|
|
|
|
|
|
#15 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
It will run between 1000-1500 probably from a good shop.
__________________
|
|
|
|
|
|
#16 |
|
Retired Navy
Drives: 2010 2SS/RS Join Date: Mar 2011
Location: NW of DFW
Posts: 916
|
Insurance repair = $2600 and some change.
|
|
|
|
|
|
#17 |
|
Tired of whiners
Drives: 2010 SS/RS IOM Join Date: Mar 2009
Location: Pittsburgh
Posts: 2,156
|
$600
__________________
When Mullets drove Camaro's, they didn't just know their car was fast, they set down their wax applicator and proved their car was fast. -J.M. March, 2012
![]() |
|
|
|
|
|
#18 |
![]() Drives: 2011 2LT RS Convertible Camaro Join Date: Jul 2011
Location: Near Austin, Texas
Posts: 329
|
__________________
2011 "Victory Red" Camaro 2LT Convertible RS Custom Painted "Corvette Black" Racing Stripes SLP Rear Quarter Gill Graphics Painted Engine Cover EmblemPros Underhood Bowtie River City Creations Custom Painted Bowties Vararam Intake JDP V6 VMAX Ported Throttle Body Hypertech Max Energy Programming SubThump Large Sub Enclosure 10" DC Sound Labs Level Four Subwoofer Sundown SAX-1200d Amp 2SSRS Rear View Backup Camera Kit
|
|
|
|
|
|
#19 | |
|
Shadowboxin
Drives: 2011 1SS 6MT GHS Join Date: Mar 2011
Location: Greenwood, Indiana
Posts: 893
|
Quote:
The $1100 estimate is pretty accurate. Depending on how badly gouged the front bumper is, it may be cheaper to replace than repair. You are still looking at having to take it off to paint it. The quarter panel will require some metal work and it will also have to be blended, so they will most likely paint half the panel....the clear coat/metallic paint add a lot of work to the process. I really wouldn't be surprised if it was closer to $1500. Good luck.
__________________
|
|
|
|
|
|
|
#20 |
![]() Drives: 2011 Black 2LT Join Date: Dec 2010
Location: Chicago
Posts: 181
|
I did a very similar thing to my car, just the opposite side. Showstopper on this forum did the repair work for mine, and added fender stripes (grand sport stripes) at the same time. When I get home from work tonight I'll check and see how much I paid for the repairs. I know how bad you feel, but it can be fixed.
__________________
|
|
|
|
|
|
#21 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2010 Chevrolet Camaro SS 6M Join Date: Nov 2010
Location: CA
Posts: 18,186
|
Ouch
__________________
|
|
|
|
|
|
#22 | |
|
OFF THE HOOK
|
Quote:
|
|
|
|
|
|
|
#23 | |
|
OFF THE HOOK
|
Quote:
|
|
|
|
|
|
|
#24 | |
|
OFF THE HOOK
|
Quote:
|
|
|
|
|
|
|
#25 |
|
Shadowboxin
Drives: 2011 1SS 6MT GHS Join Date: Mar 2011
Location: Greenwood, Indiana
Posts: 893
|
Wrong. The color of the paint is irrelevant.
If they just spray the area that is damaged, it will not look right compared to the rest of the paint. Since the damage is clearly on just 1/3 of the panel, they'll pull it off or tape it off, and repaint it. They will blend the good paint area and the damaged area with paint so that the paint looks like all one layer, instead of spray can touch up. You also have to remember they have to reshoot the clear coat as well, which is another reason why they blend the area. Trust me when I say this, if you just sprayed the damage area without any overlap, you will be able to see it every time you look at the car.
__________________
|
|
|
|
![]() |
| Tags |
| crash, damage, worst day ever |
| Thread Tools | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Understanding Paint Correction-The Nitty-Gritty | Mr CLuTcH | Cosmetic Maintenance: Washing, Waxing, Detailing, Bodywork, Protection | 29 | 03-02-2012 03:51 AM |
| Enterprise Rental Damage Issue | egad09 | Off-topic Discussions | 5 | 08-26-2011 09:42 PM |
| zaino vs adam's | youngkim | Cosmetic Maintenance: Washing, Waxing, Detailing, Bodywork, Protection | 251 | 05-16-2010 01:07 PM |
| Dealer Prep & scratch 2010 Black SS | Paul alienn | Cosmetic Maintenance: Washing, Waxing, Detailing, Bodywork, Protection | 26 | 02-20-2010 02:42 PM |
| Damage / repair estimate ? | tommygun6644 | 5th Gen Camaro SS LS LT General Discussions | 6 | 02-13-2010 12:46 PM |