I went 12.139@114.310 on P Zero's - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

kaler · 10-20-2011, 01:41 AM

I am very happy with the et

but as soon as we can get this thing to stop pulling the dam timing I am going to run it into the 11's on the stock tires.

I have a few friends that said there is no way in hell I can run 11's on P Zero's and I have a rock head.

Bad70supreme · 10-20-2011, 12:03 PM

Nice man... your going to piss off some 5.0 guys with tires on that thing

kaler · 10-20-2011, 01:23 PM

Its funny you say that it was Mustang night there were two shop owned 5.0's there one with drag radials (12.8-13.0) and one with skinies and slicks (11.9-12.2) as soon as I came thru the gates they almost ran over to ask if I wanted to line up with some 5.0's.After I made a few passes they were no were to be found but they did find a couple bone stock 5th gens to beat up on.

PQ · 10-20-2011, 01:27 PM

Quote:

Originally Posted by kaler

Its funny you say that it was Mustang night there were two shop owned 5.0's there one with drag radials (12.8-13.0) and one with skinies and slicks (11.9-12.2) as soon as I came thru the gates they almost ran over to ask if I wanted to line up with some 5.0's.After I made a few passes they were no were to be found but they did find a couple bone stock 5th gens to beat up on.

Ya, I'd have told you you were crazy too. lol

Nice times. Stock tires are rough in grabbing.

What kind of power are you putting down?

kaler · 10-20-2011, 03:55 PM

Quote:

Originally Posted by PQ

Ya, I'd have told you you were crazy too. lol

Nice times. Stock tires are rough in grabbing.

What kind of power are you putting down?

I'm still a little shy of my goal but I think it is doable after last night. We think it is ingesting oil thru the PCV causing it to pull a shit load of timing I think that is why the trap speed is only 113-114 mph.I was expecting it to trap at 117-118.

Honestly I am a little surprised it ran as quick as it did because of how much it spun thru first and second gear.

440rwhp 400rwtq

Bad70supreme · 10-20-2011, 03:56 PM

Sounds about right

You mean those 5.0s were not 10 sec bolt-on cars!

GEEo · 10-20-2011, 03:59 PM

Nice Times man!!

do you have vids of your runs?

2010 SSRS · 10-20-2011, 04:04 PM

awesome times man, Chevrolet power kicking azz, I love it.

camarovigoa · 10-20-2011, 04:20 PM

i went 11s on the p zeros

kaler · 10-20-2011, 04:28 PM

[QUOTE=GEEo;3908435]Nice Times man!!

do you have vids of your runs?

[/QUOTE

My son mounted his go pro on the trunk/windshield. I will have him post them when he gets home.

*Mindz* · 10-20-2011, 04:30 PM

Makes me want to make some runs now. Stupid axles...
Nice times.

kaler · 10-20-2011, 05:28 PM

Quote:

Originally Posted by camarovigoa

i went 11s on the p zeros

Nice!! What was your 60',e.t. And mph? I was told no one has done it yet but figured some one had to have done it already. Also what mods?

GEEo · 10-20-2011, 05:29 PM

[QUOTE=kaler;3908557]

Quote:

Originally Posted by GEEo

Nice Times man!!

do you have vids of your runs?

[/QUOTE

My son mounted his go pro on the trunk/windshield. I will have him post them when he gets home.

Padre · 10-20-2011, 05:40 PM

Nice! But you're right. You should be trapping 117+. Let us know if the PCV/oil diagnosis works out.

Padre

kaler · 10-20-2011, 05:42 PM

Quote:

Originally Posted by Mindz

Makes me want to make some runs now. Stupid axles...
Nice times.

Look at the positive side if you break an axle you have a really good excuse to buy some DSS axles.

Mindz I promise Sacramento will not say anything about how loud your car is,I had the cut outs open on most of my runs last night.

kaler · 10-20-2011, 06:14 PM

Quote:

Originally Posted by Bad70supreme

Sounds about right

You mean those 5.0s were not 10 sec bolt-on cars!

I like the fact everyone thinks the 5.0 is the end all be all. It makes my win a little sweeter and there loss sting a little more.

kaler · 10-20-2011, 06:56 PM

Quote:

Originally Posted by Padre

Nice! But you're right. You should be trapping 117+. Let us know if the PCV/oil diagnosis works out.

Padre

I may pull the valve covers this weekend to make sure there is not a broken spring causing false KR. Has anybody experienced oil ingestion causing 6+deg. Of timing to be pulled? Anybody with input would be great.

Ls1Lover · 10-20-2011, 07:31 PM

http://youtu.be/A6fFJY_y38s

Padre · 10-20-2011, 08:02 PM

Quote:

Originally Posted by Ls1Lover

http://youtu.be/A6fFJY_y38s

WTH was that in the other lane? A Yugo?

Padre

Ls1Lover · 10-20-2011, 08:32 PM

http://youtu.be/UpN8cJt7Ewg

ParisTNDude · 10-20-2011, 08:45 PM

Quote:

Originally Posted by kaler

Its funny you say that it was Mustang night there were two shop owned 5.0's there one with drag radials (12.8-13.0) and one with skinies and slicks (11.9-12.2) as soon as I came thru the gates they almost ran over to ask if I wanted to line up with some 5.0's.After I made a few passes they were no were to be found but they did find a couple bone stock 5th gens to beat up on.

I did the same thing to two Dodge SRT8s with slight mods...they were very unhappy and couldn't wait to ask about my mods. There were 5 5.0 mustangs at the track and none were running better than 12.98...the others 13.3s and up. I love it.

kaler · 10-20-2011, 08:56 PM

Quote:

Originally Posted by Padre

WTH was that in the other lane? A Yugo?

Padre

Ford Fiesta and it ran a 12.8

I stand corrected the 5.0 with the skinnies ran an 11.44.

PQ · 10-20-2011, 09:04 PM

Quote:

Originally Posted by camarovigoa

i went 11s on the p zeros

I never drove on my stock wheels so I wouldn't know how launching is with them.

kaler · 10-20-2011, 09:42 PM

Quote:

Originally Posted by PQ

I never drove on my stock wheels so I wouldn't know how launching is with them.

Listen to the second video my son posted,lots of tire spin.lol Some of the runs were a little better I tried stalling it to 1200rpm once and it just completely blew the tires off.

tvwilkes · 10-20-2011, 10:02 PM

In my 2010 2SS, I ran 11.60's on my P Zero's, with a 1.69 sixty foot.

10-20-2011, 01:41 AM	#1
kaler Drives: 2011 Dodge 3500 dually Mega Cab Join Date: Jul 2009 Location: discovery bay,ca Posts: 666	I went 12.139@114.310 on P Zero's I am very happy with the et but as soon as we can get this thing to stop pulling the dam timing I am going to run it into the 11's on the stock tires. I have a few friends that said there is no way in hell I can run 11's on P Zero's and I have a rock head. __________________ 2010 SS a6 with TSP VVT-3 cam,PRC ported heads,Yank 3200,Kooks and CAI inc. = +121 RWHP 1/4 mile 12.1 E.T. On P-Zero Tires.

10-20-2011, 12:03 PM	#2
Bad70supreme Drives: 2010 aqua blue SS/RS M6 Join Date: Feb 2010 Location: plainfield, IL Posts: 1,856	Nice man... your going to piss off some 5.0 guys with tires on that thing __________________ AMB SS M6, cammed, headers, tuned 12.3 116.4

10-20-2011, 01:23 PM	#3
kaler Drives: 2011 Dodge 3500 dually Mega Cab Join Date: Jul 2009 Location: discovery bay,ca Posts: 666	Its funny you say that it was Mustang night there were two shop owned 5.0's there one with drag radials (12.8-13.0) and one with skinies and slicks (11.9-12.2) as soon as I came thru the gates they almost ran over to ask if I wanted to line up with some 5.0's.After I made a few passes they were no were to be found but they did find a couple bone stock 5th gens to beat up on. __________________ 2010 SS a6 with TSP VVT-3 cam,PRC ported heads,Yank 3200,Kooks and CAI inc. = +121 RWHP 1/4 mile 12.1 E.T. On P-Zero Tires.

10-20-2011, 03:56 PM	#6
Bad70supreme Drives: 2010 aqua blue SS/RS M6 Join Date: Feb 2010 Location: plainfield, IL Posts: 1,856	Sounds about right You mean those 5.0s were not 10 sec bolt-on cars! __________________ AMB SS M6, cammed, headers, tuned 12.3 116.4

10-20-2011, 04:04 PM	#8
2010 SSRS R.I.P. jesserayjames Drives: 2010 IOM 2SSRS Join Date: May 2009 Location: Warwick,RI Posts: 111,715 View My Garage	awesome times man, Chevrolet power kicking azz, I love it. __________________ Jannetty Racing JRE Street Package

10-20-2011, 03:59 PM	#7
GEEo OKCamaros Drives: '13 WRX STi Join Date: Mar 2010 Location: Muskogee, OK Posts: 4,623	Nice Times man!! do you have vids of your runs?

10-20-2011, 04:20 PM	#9
camarovigoa 2013 Camaro ZL1 Drives: 2013 Camaro ZL1 Victory Red Join Date: Jan 2011 Location: Miami FL Posts: 1,914 View My Garage	i went 11s on the p zeros __________________ BEST TIME SO FAR 9.9@137 SOLD

10-20-2011, 04:28 PM	#10
kaler Drives: 2011 Dodge 3500 dually Mega Cab Join Date: Jul 2009 Location: discovery bay,ca Posts: 666	[QUOTE=GEEo;3908435]Nice Times man!! do you have vids of your runs? [/QUOTE My son mounted his go pro on the trunk/windshield. I will have him post them when he gets home. __________________ 2010 SS a6 with TSP VVT-3 cam,PRC ported heads,Yank 3200,Kooks and CAI inc. = +121 RWHP 1/4 mile 12.1 E.T. On P-Zero Tires.

10-20-2011, 04:30 PM	#11
Mindz E.B.A.H. Drives: you wild... Join Date: Mar 2007 Location: In the happy padded room wearing a jacket that makes me hug myself... Posts: 16,498	Makes me want to make some runs now. Stupid axles... Nice times. __________________ "J, you're my favorite Pokemod" ~Revo1

10-20-2011, 05:40 PM	#14
Padre Only drives on Sundays Drives: 11 2SS/RS, Black/Inferno, L99 A6 Join Date: Feb 2011 Location: Dalton, GA Posts: 2,082 View My Garage	Nice! But you're right. You should be trapping 117+. Let us know if the PCV/oil diagnosis works out. Padre __________________ The "Heretic": '11 2SS/RS L99 A6 Black/Inferno. Build Journal, Videos, Blog D1SC GT9 JBA-LT = 720/680 \| 10.330 @ 133.61, 1.546 sixty... Camaro King at ECS V, Darlington.

10-20-2011, 07:31 PM	#18
Ls1Lover Drives: 95 Z28 Camaro Join Date: May 2011 Location: BayArea,Ca Posts: 230	12.1 Video http://youtu.be/A6fFJY_y38s __________________ Just A Slow LT1 Build Thread: http://www.camaro5.com/forums/showthread.php?t=179795

10-20-2011, 08:32 PM	#20
Ls1Lover Drives: 95 Z28 Camaro Join Date: May 2011 Location: BayArea,Ca Posts: 230	12.2 No Traction. http://youtu.be/UpN8cJt7Ewg __________________ Just A Slow LT1 Build Thread: http://www.camaro5.com/forums/showthread.php?t=179795

10-20-2011, 10:02 PM	#25
tvwilkes Drives: 2011 2500HD Join Date: Aug 2009 Location: Rainbow City,Al Posts: 272	In my 2010 2SS, I ran 11.60's on my P Zero's, with a 1.69 sixty foot.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Replacing P Zeros - Recommendations Please	GLBL WMR	Wheels and Tires Talk Sponsored by The Tire Rack	7	09-18-2011 10:02 AM
20 inch rims and P Zero's	SKERIS	USA - New England	9	04-21-2011 12:30 PM
P Zero's!	Jabs	Wheels and Tires Talk Sponsored by The Tire Rack	4	04-10-2011 05:43 PM
Will you replace your P Zeros with---	Fogey	Wheels and Tires Talk Sponsored by The Tire Rack	4	12-23-2010 02:50 PM
Read: If looking for cheap p zeros	raiderXTC	USA - Rockies / Midwest	0	09-08-2010 06:54 PM