Adding a ZL1 front end to your car.

[2SSRS]

Its the same nuts as the tail lights ones, it has all the studs on the insert so all you need are the 8-pc nuts.

[MValdez17]

Originally Posted by jsharp

Hey ofer. Any updates on the hardware on installing the insert?

I have my hardware for hood and insert. But no hood or insert yet lol.

[MValdez17]

Originally Posted by 2SSRS

Its the same nuts as the tail lights ones, it has all the studs on the insert so all you need are the 8-pc nuts.

And the seal/covers for the holes. Same as the ones on the trunk for the spoiler.

[2SSRS]

You will hate me this week, Have a new black inset and 2 CF coming in.

Don't hate, by the way i still have your hood to, if you drive done with out a hood you can go back with all the parts you need.

[2010SSRSM6]

You're killing me O!

Must ........

Resist .......

Urge ......

To spend ..........

Blower money ........


Sent from my iPhone using Tapatalk

[orangejuice]

Why is the insert so muchhhhh. I want the ZL1 hood/insert so bad but damn

[Mr_Draco]

Does anyone know if there is a complete diy on how to add the ZL1 fascia?

I'm looking for a very detailed set of instructions with pics of all the needed items and detailed instructions with pics of how it all goes together and what nut and bolt is used where. There is already a video of how to remove the old fascia so all I would need it how to put the ZL1 fascia together and bolt it and the new parts to the car.

[Busy_Boi]

Originally Posted by 2SSRS

You will hate me this week, Have a new black inset and 2 CF coming in.

Don't hate, by the way i still have your hood to, if you drive done with out a hood you can go back with all the parts you need.

Can I get them if he dont want to make the drive?

[jsharp]

Nope cause one of them is mine! All mine!

[2SSRS]

Originally Posted by Busy_Boi

Can I get them if he dont want to make the drive?

Originally Posted by jsharp

Nope cause one of them is mine! All mine!

I got one today, its the CF and its nice, Busy_Boi if you want it let me know i am coming to LA this week end, a Jsharp yours is on the way too, it has shipped, had to add one for a new friend today.

[MValdez17]

Originally Posted by 2SSRS

You will hate me this week, Have a new black inset and 2 CF coming in.

Don't hate, by the way i still have your hood to, if you drive done with out a hood you can go back with all the parts you need.

As much as I want to go get one the hood I mean. I'm better off waiting I have a feeling It will be getting it here very soon. I'll worry about the insert after I paint the bumper and hood. Side skirts are already painted and just sitting in the boxes.

Any word on the other brake cooling parts? I won't know until tomorrow.

[Busy_Boi]

Originally Posted by 2SSRS

I got one today, its the CF and its nice, Busy_Boi if you want it let me know i am coming to LA this week end, a Jsharp yours is on the way too, it has shipped, had to add one for a new friend today.

Yes I do P.M. me price and let me know where in L.A. your going to be I will pick it up or if your going to be close you can drop it of. Thanks Ofer you just made my day.

[The Flash]

Originally Posted by Mr_Draco

Does anyone know if there is a complete diy on how to add the ZL1 fascia?

I'm looking for a very detailed set of instructions with pics of all the needed items and detailed instructions with pics of how it all goes together and what nut and bolt is used where. There is already a video of how to remove the old fascia so all I would need it how to put the ZL1 fascia together and bolt it and the new parts to the car.

@Mr Draco:

Hi!!. I'm working on the same task.

Here is what I have learned so far.

A very nice member of the forum (I believe it was ACR) answered one of my PM's on this subject and explained that it will do me no good to purchase the OEM ZL1 front fascia since it has a central rise that matches the original OEM ZL1 engine hood, but does not match the standard SS hood.

There will be some visible missalignment.

The options are either go for the full boat and also buy the OEM ZL1 hood pluis inserts which is a very expensive proposition. Another forum member graciously posted here the actual costs of all the parts for the hood. You are looking at something around three grand and a half!!

I have sent PM to other members who installed perfect looking ZL1 replicas that match their standard SS hoods asking for their suppliers. I'm waiting to read what they have to say.

I also got a quotation from a gentleman of this forum who manufactures a front fascia which is based on the front fascia of "BUMBLEBEE" in the second TRANSFORMERS movie and which looks a lot like the ZL1.

I found a company in the US that is distributing a hood that duplicates the ZL1 yet the insert is not made in authentic carbon fiber. However is less than half the cost of the real ZL1 hood. I have bought parts from them in the past for my FIREBIRD so I now they are reliable business and quality wise.

If you are interested in this info send me a PM and I will be glad to share what I have found so far in this project.

Safe driving,


The Flash

[Revo1]

Thanks for all the help!

[2SSRS]

Originally Posted by Mr_Draco

Does anyone know if there is a complete diy on how to add the ZL1 fascia?

I'm looking for a very detailed set of instructions with pics of all the needed items and detailed instructions with pics of how it all goes together and what nut and bolt is used where. There is already a video of how to remove the old fascia so all I would need it how to put the ZL1 fascia together and bolt it and the new parts to the car.

I will try to make a video in the next two days for you.

Originally Posted by The Flash

@Mr Draco:

Hi!!. I'm working on the same task.

Here is what I have learned so far.

A very nice member of the forum (I believe it was ACR) answered one of my PM's on this subject and explained that it will do me no good to purchase the OEM ZL1 front fascia since it has a central rise that matches the original OEM ZL1 engine hood, but does not match the standard SS hood.

There will be some visible missalignment.

The options are either go for the full boat and also buy the OEM ZL1 hood pluis inserts which is a very expensive proposition. Another forum member graciously posted here the actual costs of all the parts for the hood. You are looking at something around three grand and a half!!

I have sent PM to other members who installed perfect looking ZL1 replicas that match their standard SS hoods asking for their suppliers. I'm waiting to read what they have to say.

I also got a quotation from a gentleman of this forum who manufactures a front fascia which is based on the front fascia of "BUMBLEBEE" in the second TRANSFORMERS movie and which looks a lot like the ZL1.

I found a company in the US that is distributing a hood that duplicates the ZL1 yet the insert is not made in authentic carbon fiber. However is less than half the cost of the real ZL1 hood. I have bought parts from them in the past for my FIREBIRD so I now they are reliable business and quality wise.

If you are interested in this info send me a PM and I will be glad to share what I have found so far in this project.

Safe driving,


The Flash[/COLOR][/SIZE][/FONT]

With all do respect stop PM people who have not installed one bumper on this car, Yes if you dont want to run the ZL1 hood your body shop needs to move the line's on the bumper , there are nice hoods out there for a lot less the the OEM ZL1 hoods but its not as good IMO, On this thread there is more then 50 members that have done the mod, so we know it works.

[bn1651]

Out of curiosity has anyone actual bought the "ebay" zl1 hood and checked to see if the cowl lines up with the zl1 fascia?

[2SSRS]

Yes a member has, he will post up if done this weekend.

[LIV4MUDDIN]

Originally Posted by 2SSRS

I will try to make a video in the next two days for you.




With all do respect stop PM people who have not installed one bumper on this car, Yes if you dont want to run the ZL1 hood your body shop needs to move the line's on the bumper , there are nice hoods out there for a lot less the the OEM ZL1 hoods but its not as good IMO, On this thread there is more then 50 members that have done the mod, so we know it works.

[Caliman93230]

Originally Posted by Revo1

Thanks for all the help!

Cool bro looks badass

[kbui]

Originally Posted by Revo1

Thanks for all the help!

Nice ! Your setup is very similar to mine with OEM GFX...

[orangejuice]

Originally Posted by 2SSRS

I got one today, its the CF and its nice, Busy_Boi if you want it let me know i am coming to LA this week end, a Jsharp yours is on the way too, it has shipped, had to add one for a new friend today.

You're the man Ofer!

[Mr_Draco]

Originally Posted by 2SSRS

Yes if you dont want to run the ZL1 hood your body shop needs to move the line's on the bumper

What does the fascia and stock hood look like before moving the lines? Do you have a pic?

[orangejuice]

Originally Posted by Mr_Draco

What does the fascia and stock hood look like before moving the lines? Do you have a pic?

You can look at my pictures. Im still running the stock hood. Honestly, its not noticeable until you're looking for it. Family members can't notice it until really looking for it to be honest.

[Revo1]

Originally Posted by Caliman93230

Cool bro looks badass

Thanks mang

Originally Posted by kbui

Nice ! Your setup is very similar to mine with OEM GFX...

Yeah buddy! I did spend some time lookin at your garage- helped to make sure this was what I wanted for the car

Cheers man!

[MARINE1991]

Originally Posted by 2SSRS

I will try to make a video in the next two days for you.




With all do respect stop PM people who have not installed one bumper on this car, Yes if you dont want to run the ZL1 hood your body shop needs to move the line's on the bumper , there are nice hoods out there for a lot less the the OEM ZL1 hoods but its not as good IMO, On this thread there is more then 50 members that have done the mod, so we know it works.

Ofer is the body shop doing this for me??