Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Flowmaster Exhaust
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > General Camaro Forums > Member Car Journals

Member Car Journals Want to keep a long term Camaro project journal to share with the community? Use this forum to create a single thread which you can update over time to document the progress.

Reply
 
Thread Tools
Old 11-06-2012, 09:57 AM   #1
ParkerB57
COTW 11/12/12
 
Drives: 1SS RS IBM
Join Date: May 2010
Location: Colorado Springs
Posts: 200
Arrow Parkers Turbo Blue build [COTW 11/12/12]

Hi, my name is Ben Parker I’ve read through many of these car journals and I’m finally getting around to doing mine. I wish I had more pictures of my build but I will add to the along the way.

I am a Staff Sergeant in the US Army. I am an Explosive Ordnance Disposal (EOD) Platoon Sergeant.

I bought my 1SS Imperial Blue Metallic in June 2010 after my first tour in eastern Afghanistan. The only options I added were the RS package and the Boston Acoustic sound system. After the USAA discount I paid $31,500 before tax, title ect.



Myself preparing to walk down and render safe an IED



My new toy awaiting my arrival. Thank you American tax payers

My dad works as a salesman/manager at Columbia Chevrolet in Cincinnati Ohio. This was the first IBM Camaro they received and he hide the car way back in the service department for a month before I arrived. He said to many people were touching it on the show room floor for his comfort.

The first Mod that I did to the car was add the steering wheel mounted audio controls, thank you Camaro5 for that easy how too.

My then girl friend and my dad drove my truck plus trailer and the Camaro from Cincinnati Ohio to Ft Irwin California. On the road trip I mostly drove the truck with my dad cruising in the Camaro. He is a magician because following me averaging 75mph cross country he got 25.5 MPG. How a man can drive 31 hours not using the cruise control is a wonder to me. I never got more then 24 after that.

My next mod was a MGW short throw shifter. I installed the shifter myself and following the videos it was extremely easy. If anyone is looking for a short shifter the $350 cost is very attractive seeing how it replaces the entire shifter assembly not just the shifter lever. http://www.mgwltd.com/camaro2010_short_throw_shifter.shtml

Unfortunately I don’t have any pictures of the MWG shifter install or the cross country road trip.

Next mod was an ARK performance DT-S cat back exhaust system. ARK was doing a special where for 500 dollars you could help them finish their production version of the exhaust. So after a brief PM to ARK the car was on its way. This exhaust is an absolute work of art. It made my car sound like no big displacement American V8 I’ve ever heard. The best way to describe the sound to you would be a large European V8 with an American twist. Absolutely awesome!! The best part, no drone on the highway.




The car stayed in this configuration for about a year after this. In Febuary of 2011 I volenteered to return to Afghanistan. This tour would take me to southern Afghanistan.




During the tour I knew that it was time to really put the Camaro on track for what I had been wanting to do since I bought the car. BOOST IT



Turbos are the standard. When I was in high school me and my buddies turned my 02 Sentra SE-R Spec V into a turbo monster (in our eyes) making 265whp and 270Wtq




So when I discovered Turbonetics made a single turbo 50 state legal kit I was sold. Now throughout the year I was overseas I contacted several venders. This build is what I focused on when things got really tough over there. It kept me sane in other wise chaotic times.

I want to thank those venders for taking the time to talk to me. Most noteably Steve at RDP Motorsports in northern Ohio. I must have talked to steve a helf dozen times about his car and all the options that I could do.

Due to a variety of reasons I ended up purchasing the kit directly from Turbonetics. Reggie took great care of me and just like Steve didnt mind my frequent calls and PMs.

So I have the kit purchased; now it’s time for supporting mods. I knew I wanted to take the car on the road course so I began researching suspension companies. I narrowed it to PFADT, BMR, and Pedders. The BMR stage 3 kit seemed most cost effective. When I called BMR and PFADT they were very helpful and answered my questions.

When I called Pedders it was a different story. A guy named Pete answered the phone and I stated that I was looking for a suspension setup for my Camaro. Pete and I then launched into a 20 min conversation about what my power goals were and how I was hoping to drive the car. It was very important he said that I knew the required differences between a street setup, drag setup and road race setup. He explained all of these setups to me and helped me decide what I really wanted to do, and EXPECTED out of the car. Pete then asked what I did for a living; I explained I was Army EOD currently in Afghanistan, that then launched into another 20 min conversation of Pete and I just getting to know each other. So Pete advised that I go with the ZL1 pace car package. He stated that it was more than I wanted to spend but for my desired goals it would be perfect and wouldn’t require upgrading for some time.

Pete then blew me away even more when he added the EOD wounded memorial to his signature block at the bottom of his user name. When I first started talking to Pete I had no idea I was talking to the owner of the company. You are a great man my friend, and I’m proud to be able to call you my friend. Pete and I kept up through the rest of my tour.

I then sourced a CTS-V brake upgrade from Jordan at JDP motorsports. Jordan and I had several great talks about the setup and I ordered several more part threw them.

To monitor everything I ordered PLX devices DM-100 OBDII gauge with A/F module and a DM-6 gauge with Vac/Boost module now all the vital signals from the engine can be read on two gauges.

The final piece to the puzzle was wheels and tires. Once again I started contacting several venders about wheel and tire setups. I quickly decided on the TSW Nurburgring matted bronze finish. The tires and vender to purchase from was the tough choice. After talking to several great and very helpful people I came across Jon at www.bestwheeldeals.com. After talking to Jon he set me up with Nitto NT-05 275 fronts with NT-05 315 rears. With the lowered profile the wheels and tires fit the wheel wells perfectly and it’s a mean as hell setup.

Heres a list of additional parts I ordered.

Hurst Line Lock
Greddy Turbo Timer
BMR Tunnel Brace


Ok so enough talking lets get to pics of the build.

Everything laid out in my uncles garage



Last 15 feet driven NA



Hood pulled off, car jacked up. I not sure how many of you know this but the stock hood weights nothing. I can one finger lift it. When my uncle and I had it unbolted it from the car and were ready to lift it up we did a three count. After three we dammed near threw it through the ceiling because we weren’t expecting it to be that light.



Front bumper pulled off, all the parts that need to come off are, now to start adding stuff




Hole in oil pan drilled, oil return line run, parts an pieces heat wrapped and up pipe beging to take shape.



Turbo mounted



Turbo mounted, up pipe and down pipe mounted, water lines spliced and run to the turbo, oil feed line ran to the turbo, more items heat wrapped



setting up the waste gates before bolting up the under car plumbing



Up loading the Turbonetics tune, car turned right over and settled down to a nice idel right away.



Finished engine bay, topping off the coolent as the engine cycles through the radiator



View from font of car, check out that small intercooler



My uncle and I, thanks uncle Ed for the help and tools



CTS-V front brakes going on, this was a simple job. It took me under and hour to install the JDP kit. Only issue I had was forgetting that there were two bleeders on the brakes.




Wiring up the PITA PLX gauges



The end all result of the turbo install



And helping the other side out. This is the only current pic I have of the HEX vents. I went with the Carbon Fiber dipped vents and they are beautiful. Steve is an amazing man who did the install at the Camaro fest.




This is what the car looks like with the Nurburgring. I have taken them off the car for the winter so no updated pics until the spring.



Well guys and gals that’s it for now. I need to take alot more pics to show you guys the car with Pedders suspension and the TSW wheels. Life’s crazy right now going through a divorce and some medical issues. But I’m still breathing, I have all my fingers and toes, there were several times over there that I came out of situations unscathed when really I shouldn’t even be here typing this now. Remember the fallen who didn’t come home, who paid for our everyday freedoms.

We have one life to live and you can’t waste it. Life is too short to live in fear, go out and face life, own it, and you will be as happy as I am today.

Ben

__________________

Last edited by ParkerB57; 11-06-2012 at 10:31 AM.
ParkerB57 is offline   Reply With Quote
Old 11-06-2012, 10:46 AM   #2
dynosteve
www.rdpstore.com

 
dynosteve's Avatar
 
Drives: 2010 SS Camaro Turbo
Join Date: Oct 2009
Location: Painesville Ohio
Posts: 3,429
Send a message via Yahoo to dynosteve
thats awesome mate so happy its all coming together for you
__________________
www.rdpstore.com Ph: 440 358 5500 or 440 251 8571 SLP / Kooks / SCT / Diablosport / Cold Air Inductions / Whipple / Vortech / TruTrac /Edelbrock / Fore Innovations / DSS / Hayes / Turbonetics / Vredestein / Borla / Maganflow / Corsa / Stainless Works / Hotchkis / EBC / Magnuson / Airaid / Whiteline /Fore Innovations / Snow /Trickflow / Moroso / Hp Tuners / Brembo / Rotofab and much much more
dynosteve is offline   Reply With Quote
Old 11-06-2012, 10:50 AM   #3
Mindz
E.B.A.H.
 
Mindz's Avatar
 
Drives: you wild...
Join Date: Mar 2007
Location: In the happy padded room wearing a jacket that makes me hug myself...
Posts: 18,195
Nice first post of your build thread. Thank you for serving and protecting this country. Props for installing the turbo at home. They make a great kit and you even picked the best color!
__________________
Blue Rush, 2010 SS [Car of the Week 3/22/2010] Traded in on...ZLZBUBB, 2013 ZL1
Mindz is offline   Reply With Quote
Old 11-06-2012, 11:13 AM   #4
ParkerB57
COTW 11/12/12
 
Drives: 1SS RS IBM
Join Date: May 2010
Location: Colorado Springs
Posts: 200
Quote:
Originally Posted by dynosteve View Post
thats awesome mate so happy its all coming together for you
Thanks again for your help and advice

Ben
__________________
ParkerB57 is offline   Reply With Quote
Old 11-06-2012, 11:17 AM   #5
ARK Performance

 
ARK Performance's Avatar
 
Drives: Dodge Viper
Join Date: Oct 2009
Location: CHINO, CA 91710
Posts: 1,294
Nice build and great looking Camaro! It's always nice to see builds done in your own garage. Hopefully we can see some videos in the spring time!
ARK Performance is offline   Reply With Quote
Old 11-06-2012, 12:11 PM   #6
ParkerB57
COTW 11/12/12
 
Drives: 1SS RS IBM
Join Date: May 2010
Location: Colorado Springs
Posts: 200
Quote:
Originally Posted by ARKperformance View Post
Nice build and great looking Camaro! It's always nice to see builds done in your own garage. Hopefully we can see some videos in the spring time!

I posted a video to you facebook page
__________________
ParkerB57 is offline   Reply With Quote
Old 11-06-2012, 12:13 PM   #7
ParkerB57
COTW 11/12/12
 
Drives: 1SS RS IBM
Join Date: May 2010
Location: Colorado Springs
Posts: 200
Pueblo Motorsports park track day, ARK DT-S mufflers with Turbonetics turbo kit

__________________
ParkerB57 is offline   Reply With Quote
Old 11-06-2012, 12:16 PM   #8
Camaro21


 
Camaro21's Avatar
 
Drives: 2010 2SS/RS M6
Join Date: Jul 2009
Location: DFW, TX
Posts: 5,027
Great Story and Build and Thank You for your Service to our Great Country!!
__________________
Camaro21 is offline   Reply With Quote
Old 11-06-2012, 12:30 PM   #9
ParkerB57
COTW 11/12/12
 
Drives: 1SS RS IBM
Join Date: May 2010
Location: Colorado Springs
Posts: 200
Well thanks to ARK Performance you reminded me that I had sent you guys pictures after the race weekend. So I went threw my emails and found the pics.

Here is the finished product:

ARK Performance DT-S mufflers

Raymonds Performance Engine Cover

Pedders ZL1 Pace Car Kit

Turbonetics Turbo Kit

TSW Nurburgring 8.5x20fronts with 275 NT-05 10x20 rears with 315 NT-05

HEX Vents Hood Vents

CTS-V front brakes

PLX Device gauges





__________________

Last edited by ParkerB57; 11-06-2012 at 01:45 PM.
ParkerB57 is offline   Reply With Quote
Old 11-06-2012, 01:35 PM   #10
Ivan @ Southwest Speed
Southwestspeed.net

 
Ivan @ Southwest Speed's Avatar
 
Drives: '10 2SS/RS, '96 Z28
Join Date: May 2009
Location: Rio Rancho, NM
Posts: 11,650
Hooyah EOD!

Ivan
Ivan @ Southwest Speed is offline   Reply With Quote
Old 11-06-2012, 03:01 PM   #11
GaBoy25


 
GaBoy25's Avatar
 
Drives: 2010 SS/RS M6/2500HD Lmm LTZ
Join Date: Apr 2012
Location: South Georgia
Posts: 2,551
Bad to the azz!

Thank you for your service and sacrifice.
__________________
FASTER than my SS....for now

2500HD (with a couple parts)



Quote:
Originally Posted by Coyotekiller View Post
I wonder if this could be why my car idles like its retarded...
GaBoy25 is offline   Reply With Quote
Old 11-06-2012, 09:58 PM   #12
ParkerB57
COTW 11/12/12
 
Drives: 1SS RS IBM
Join Date: May 2010
Location: Colorado Springs
Posts: 200
thanks everyone
__________________
ParkerB57 is offline   Reply With Quote
Old 11-11-2012, 12:05 PM   #13
Jeffay
 
Jeffay's Avatar
 
Drives: 2010 Chevrolet Camaro RS/SS
Join Date: Aug 2012
Location: Silverdale, Wa
Posts: 50
Thanks for what you do overseas man. Love the single turbo build. Been contemplating that or supercharger, now I know my route.
Jeffay is offline   Reply With Quote
Old 11-11-2012, 12:18 PM   #14
pyr0b0y
need....more....hp
 
pyr0b0y's Avatar
 
Drives: The Neighbor Hater
Join Date: Dec 2010
Location: San Mateo, CA
Posts: 4,171
Great build! You made a great decision going turbo! IMO turbos make a bigger permagrin than superchargers when the boost hits! Been eyeing those ZL1 brakes myself.

Any pics of where you installed the PLX gauges? Mine are on my a-pillar.
__________________


Mast Motorsports Built LS3 Stroker 418, IPS GT35R Twin Turbos, Exedy GTO4XD Twin Disc Clutch, Aeromotive A1000 Eliminator Stealth Fuel Pump, AEM Meth Injection, DSS 1400hp Axels, BC Coilovers, Pfadt & BMR Suspension, Hawk HPS Pads, Drilled/Slotted Rotors, Hurst Shifter, Custom Roll Cage by Blu808, T3 Ports, 22" Custom Concave Mesh Rims
pyr0b0y is offline   Reply With Quote
Old 11-12-2012, 05:30 PM   #15
FINALLYSATISFIED
Est.1775
 
FINALLYSATISFIED's Avatar
 
Drives: ZL1#206 (Sold) 6th Gen!?
Join Date: Sep 2009
Location: SoCal
Posts: 5,386
NICE! Congrats and well deserved.
FINALLYSATISFIED is offline   Reply With Quote
Old 11-12-2012, 06:47 PM   #16
laditee


 
laditee's Avatar
 
Drives: 2010 Camaro 2SS
Join Date: Jun 2010
Location: Jerzy
Posts: 2,449
Congrats on COTW.....very nice ride...thanks for serving our country...
__________________
laditee is offline   Reply With Quote
Old 11-12-2012, 07:52 PM   #17
camoman
 
camoman's Avatar
 
Drives: 2010 1SS IBM L99
Join Date: Apr 2009
Location: Miramar Florida
Posts: 314
Old pic !

Quote:
Originally Posted by ParkerB57 View Post
Hi, my name is Ben Parker Iíve read through many of these car journals and Iím finally getting around to doing mine. I wish I had more pictures of my build but I will add to the along the way.

I am a Staff Sergeant in the US Army. I am an Explosive Ordnance Disposal (EOD) Platoon Sergeant.

I bought my 1SS Imperial Blue Metallic in June 2010 after my first tour in eastern Afghanistan. The only options I added were the RS package and the Boston Acoustic sound system. After the USAA discount I paid $31,500 before tax, title ect.



Myself preparing to walk down and render safe an IED



My new toy awaiting my arrival. Thank you American tax payers

My dad works as a salesman/manager at Columbia Chevrolet in Cincinnati Ohio. This was the first IBM Camaro they received and he hide the car way back in the service department for a month before I arrived. He said to many people were touching it on the show room floor for his comfort.

The first Mod that I did to the car was add the steering wheel mounted audio controls, thank you Camaro5 for that easy how too.

My then girl friend and my dad drove my truck plus trailer and the Camaro from Cincinnati Ohio to Ft Irwin California. On the road trip I mostly drove the truck with my dad cruising in the Camaro. He is a magician because following me averaging 75mph cross country he got 25.5 MPG. How a man can drive 31 hours not using the cruise control is a wonder to me. I never got more then 24 after that.

My next mod was a MGW short throw shifter. I installed the shifter myself and following the videos it was extremely easy. If anyone is looking for a short shifter the $350 cost is very attractive seeing how it replaces the entire shifter assembly not just the shifter lever. http://www.mgwltd.com/camaro2010_short_throw_shifter.shtml

Unfortunately I donít have any pictures of the MWG shifter install or the cross country road trip.

Next mod was an ARK performance DT-S cat back exhaust system. ARK was doing a special where for 500 dollars you could help them finish their production version of the exhaust. So after a brief PM to ARK the car was on its way. This exhaust is an absolute work of art. It made my car sound like no big displacement American V8 Iíve ever heard. The best way to describe the sound to you would be a large European V8 with an American twist. Absolutely awesome!! The best part, no drone on the highway.




The car stayed in this configuration for about a year after this. In Febuary of 2011 I volenteered to return to Afghanistan. This tour would take me to southern Afghanistan.




During the tour I knew that it was time to really put the Camaro on track for what I had been wanting to do since I bought the car. BOOST IT



Turbos are the standard. When I was in high school me and my buddies turned my 02 Sentra SE-R Spec V into a turbo monster (in our eyes) making 265whp and 270Wtq




So when I discovered Turbonetics made a single turbo 50 state legal kit I was sold. Now throughout the year I was overseas I contacted several venders. This build is what I focused on when things got really tough over there. It kept me sane in other wise chaotic times.

I want to thank those venders for taking the time to talk to me. Most noteably Steve at RDP Motorsports in northern Ohio. I must have talked to steve a helf dozen times about his car and all the options that I could do.

Due to a variety of reasons I ended up purchasing the kit directly from Turbonetics. Reggie took great care of me and just like Steve didnt mind my frequent calls and PMs.

So I have the kit purchased; now itís time for supporting mods. I knew I wanted to take the car on the road course so I began researching suspension companies. I narrowed it to PFADT, BMR, and Pedders. The BMR stage 3 kit seemed most cost effective. When I called BMR and PFADT they were very helpful and answered my questions.

When I called Pedders it was a different story. A guy named Pete answered the phone and I stated that I was looking for a suspension setup for my Camaro. Pete and I then launched into a 20 min conversation about what my power goals were and how I was hoping to drive the car. It was very important he said that I knew the required differences between a street setup, drag setup and road race setup. He explained all of these setups to me and helped me decide what I really wanted to do, and EXPECTED out of the car. Pete then asked what I did for a living; I explained I was Army EOD currently in Afghanistan, that then launched into another 20 min conversation of Pete and I just getting to know each other. So Pete advised that I go with the ZL1 pace car package. He stated that it was more than I wanted to spend but for my desired goals it would be perfect and wouldnít require upgrading for some time.

Pete then blew me away even more when he added the EOD wounded memorial to his signature block at the bottom of his user name. When I first started talking to Pete I had no idea I was talking to the owner of the company. You are a great man my friend, and Iím proud to be able to call you my friend. Pete and I kept up through the rest of my tour.

I then sourced a CTS-V brake upgrade from Jordan at JDP motorsports. Jordan and I had several great talks about the setup and I ordered several more part threw them.

To monitor everything I ordered PLX devices DM-100 OBDII gauge with A/F module and a DM-6 gauge with Vac/Boost module now all the vital signals from the engine can be read on two gauges.

The final piece to the puzzle was wheels and tires. Once again I started contacting several venders about wheel and tire setups. I quickly decided on the TSW Nurburgring matted bronze finish. The tires and vender to purchase from was the tough choice. After talking to several great and very helpful people I came across Jon at www.bestwheeldeals.com. After talking to Jon he set me up with Nitto NT-05 275 fronts with NT-05 315 rears. With the lowered profile the wheels and tires fit the wheel wells perfectly and itís a mean as hell setup.

Heres a list of additional parts I ordered.

Hurst Line Lock
Greddy Turbo Timer
BMR Tunnel Brace


Ok so enough talking lets get to pics of the build.

Everything laid out in my uncles garage



Last 15 feet driven NA



Hood pulled off, car jacked up. I not sure how many of you know this but the stock hood weights nothing. I can one finger lift it. When my uncle and I had it unbolted it from the car and were ready to lift it up we did a three count. After three we dammed near threw it through the ceiling because we werenít expecting it to be that light.



Front bumper pulled off, all the parts that need to come off are, now to start adding stuff




Hole in oil pan drilled, oil return line run, parts an pieces heat wrapped and up pipe beging to take shape.



Turbo mounted



Turbo mounted, up pipe and down pipe mounted, water lines spliced and run to the turbo, oil feed line ran to the turbo, more items heat wrapped



setting up the waste gates before bolting up the under car plumbing



Up loading the Turbonetics tune, car turned right over and settled down to a nice idel right away.



Finished engine bay, topping off the coolent as the engine cycles through the radiator



View from font of car, check out that small intercooler



My uncle and I, thanks uncle Ed for the help and tools



CTS-V front brakes going on, this was a simple job. It took me under and hour to install the JDP kit. Only issue I had was forgetting that there were two bleeders on the brakes.




Wiring up the PITA PLX gauges



The end all result of the turbo install



And helping the other side out. This is the only current pic I have of the HEX vents. I went with the Carbon Fiber dipped vents and they are beautiful. Steve is an amazing man who did the install at the Camaro fest.




This is what the car looks like with the Nurburgring. I have taken them off the car for the winter so no updated pics until the spring.



Well guys and gals thatís it for now. I need to take alot more pics to show you guys the car with Pedders suspension and the TSW wheels. Lifeís crazy right now going through a divorce and some medical issues. But Iím still breathing, I have all my fingers and toes, there were several times over there that I came out of situations unscathed when really I shouldnít even be here typing this now. Remember the fallen who didnít come home, who paid for our everyday freedoms.

We have one life to live and you canít waste it. Life is too short to live in fear, go out and face life, own it, and you will be as happy as I am today.

Ben

That's a old pic with photo shoped wheels
camoman is offline   Reply With Quote
Old 11-12-2012, 08:58 PM   #18
camaro_RS
Emerald Coast Camaros
 
camaro_RS's Avatar
 
Drives: A lot of show, not much go.
Join Date: Mar 2011
Location: Emerald Coast
Posts: 3,390
Awesome build! Thanks for sharing your story. Very inspirational. Congrats on the build and COTW.
__________________
-White Mary Jane....build thread [COTW 6/11/12] :

camaro_RS is offline   Reply With Quote
Old 11-12-2012, 11:19 PM   #19
RTRO 2SS
 
RTRO 2SS's Avatar
 
Drives: 2010 2SSRS 6 Speed
Join Date: Mar 2011
Location: California
Posts: 19
Thank you for serving. I imagine anybody that makes it through a tour and volunteers for another has got to be a special but then all the guys and gals putting their lives on the line for us here at home are special. Nice build and I must say you chose the best color. Thanks for sharing it with us. May you have many miles of enjoyment in your bitchen Camaro. God bless you, Chevrolet and fossil Fuel
RTRO 2SS is offline   Reply With Quote
Old 11-13-2012, 12:42 AM   #20
pierre777
HT5 COTW 9/3/2012
 
pierre777's Avatar
 
Drives: Cyber Bullet
Join Date: Jun 2011
Location: lebanon
Posts: 4,558
Send a message via Skype™ to pierre777
CONGRATS for COTW great looking car and i like the build pics ,good work.
__________________
pierre777 is offline   Reply With Quote
Old 11-13-2012, 06:55 AM   #21
GEEo
OKCamaros
 
GEEo's Avatar
 
Drives: '13 WRX STi
Join Date: Mar 2010
Location: Muskogee, OK
Posts: 4,600
Congrats on COTW bro!!
GEEo is offline   Reply With Quote
Old 11-13-2012, 07:43 AM   #22
stand-al0ne
Rev Couture
 
stand-al0ne's Avatar
 
Drives: 2010 LS Camaro & 2013 Rav4 Ltd
Join Date: Jan 2010
Location: Jamlando, FL
Posts: 1,081
Great Build - congrats on COTW

Thanks for all you do overseas.
I enjoyed reading what you had to say this AM - I'm going to make it a good day!
__________________
EBC Brakes| DOT 4|Bigworm| SickSpeed| BMR | IPF | Vararam| MRT |MGW | Nitto | Rx |
Iggee |ZL-1 Sways| Hurst | Apex Racing|Past: Srt-4| 6.0L GTO- RIP | '98 Integra

stand-al0ne is offline   Reply With Quote
Old 11-13-2012, 08:49 AM   #23
billd579
 
billd579's Avatar
 
Drives: 2010 Camaro SS/RS
Join Date: Apr 2010
Location: Huntsville, Al
Posts: 388
Congrats on COTW
billd579 is offline   Reply With Quote
Old 11-13-2012, 09:18 AM   #24
Ivan @ Southwest Speed
Southwestspeed.net

 
Ivan @ Southwest Speed's Avatar
 
Drives: '10 2SS/RS, '96 Z28
Join Date: May 2009
Location: Rio Rancho, NM
Posts: 11,650
Right on! Congrats on your COTW!!

Keep it up!
Ivan
Ivan @ Southwest Speed is offline   Reply With Quote
Old 11-13-2012, 09:20 AM   #25
Trav2SS
MTMTEYE
 
Trav2SS's Avatar
 
Drives: 2010 Camaro 2SS
Join Date: Jul 2010
Location: Pittsburgh
Posts: 633
Beautiful car and setup man, and God Bless!
__________________
MTMTEYE
2010 2SS/RS M6

Aftermarket bolt on parts and tune.. 434hp/395tq
Daily Driver.
Trav2SS is online now   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:58 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.