Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Phastek Performance
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Engine | Drivetrain | Powertrain Technical Discussions > Forced Induction - V8


Reply
 
Thread Tools
Old 12-08-2011, 03:52 PM   #18
ADM PERFORMANCE

 
Drives: 2013 ZL1 #138
Join Date: Oct 2008
Location: DfW - Texas
Posts: 4,552
Quote:
Originally Posted by Camaro21 View Post
I have the Race Intake w/scoop already or are you talking about the Air/Fuel guage?
YES
ADM PERFORMANCE is offline   Reply With Quote
Old 12-08-2011, 07:40 PM   #19
SRT10KLLR

 
Drives: 2010 Camaro 2SS/RS
Join Date: Sep 2009
Location: Down South
Posts: 1,498
Quote:
Originally Posted by ADM PERFORMANCE View Post
Yes,But why not make hardlines?

Are your turbos in the back?
I thought about it when I saw someone on LS1T use the hardlines but I don't have a bender or the tube to do it.

I also want to cover the hotwire kit for the fuel pumps but I would need that heat shield large enough to go around the wire loom. I would only need a small section where it passes the turbo and manifolds.

The turbos are mid mounted where the cats used to be.
__________________
2005 Dodge Ram 2500 RCSB Thunder Road Hemi Sport w/STS Turbo
2004 Dodge Ram SRT-10 - Silver - Stock
2003 Chevy 1500 RCSB Stepside 400SS - 408 in now awaiting Turbo
SRT10KLLR is offline   Reply With Quote
Old 12-09-2011, 10:29 AM   #20
ADM PERFORMANCE

 
Drives: 2013 ZL1 #138
Join Date: Oct 2008
Location: DfW - Texas
Posts: 4,552
Quote:
Originally Posted by SRT10KLLR View Post
I thought about it when I saw someone on LS1T use the hardlines but I don't have a bender or the tube to do it.

I also want to cover the hotwire kit for the fuel pumps but I would need that heat shield large enough to go around the wire loom. I would only need a small section where it passes the turbo and manifolds.

The turbos are mid mounted where the cats used to be.


Ok than
ADM PERFORMANCE is offline   Reply With Quote
Old 12-13-2011, 08:33 AM   #21
FloMoCamaro
 
FloMoCamaro's Avatar
 
Drives: 2010 Camaro SS
Join Date: Dec 2009
Location: Flower Mound, TX
Posts: 490
Any updates on this Monster?
__________________
FloMoCamaro is offline   Reply With Quote
Old 12-13-2011, 09:54 AM   #22
Camaro21


 
Camaro21's Avatar
 
Drives: 2013 M6 ZL1
Join Date: Jul 2009
Location: DFW, TX
Posts: 5,042
Andy should finish it up this week. I had him so a few other things while he had it!!! I can't hardly wait!!
__________________
Camaro21 is offline   Reply With Quote
Old 12-13-2011, 01:17 PM   #23
FloMoCamaro
 
FloMoCamaro's Avatar
 
Drives: 2010 Camaro SS
Join Date: Dec 2009
Location: Flower Mound, TX
Posts: 490
Quote:
Originally Posted by Camaro21 View Post
Andy should finish it up this week. I had him so a few other things while he had it!!! I can't hardly wait!!
What? A Parachute Keep us posted on the progress...
__________________
FloMoCamaro is offline   Reply With Quote
Old 12-14-2011, 12:45 PM   #24
Camaro21


 
Camaro21's Avatar
 
Drives: 2013 M6 ZL1
Join Date: Jul 2009
Location: DFW, TX
Posts: 5,042
Quote:
Originally Posted by FloMoCamaro View Post
What? A Parachute Keep us posted on the progress...
I should have her back by this Friday (if everything goes well).. I will post up some pics when i get it back !!
__________________
Camaro21 is offline   Reply With Quote
Old 12-14-2011, 01:14 PM   #25
bkscott

 
bkscott's Avatar
 
Drives: 2010 Camaro 2SS/RS
Join Date: Dec 2009
Location: Grand Prairie, Texas
Posts: 1,510
Quote:
Originally Posted by FloMoCamaro View Post
What? A Parachute Keep us posted on the progress...

More likely reverse thrusters so he can stop at the end of the 1/4 mile.
__________________
94 Firebird Formula (Drowned 08/30/05)
2010 IBM 2SS/RS 6M Arrived 3/25/10.

ADM CAI, Borla Type S Cat Back, VMAX Ported TB, LG Short Throw Shifter, BC Racing Coilovers, Hotchkis Sway Bars, Whiteline Cradle Bushings, Custom Powdercoated ZL1's ,Nitto Motivos, Stainless Power Headers, Solo J Pipes, AAC LED Sidemarkers, ZL1 Rockers, SLP Splitter, ADM Stage II Cam,ZL1 Diffuser,Vitesse Throttle Controller, Magnaflow Resonated X Pipe.

bkscott is offline   Reply With Quote
Old 12-18-2011, 04:53 PM   #26
ADM PERFORMANCE

 
Drives: 2013 ZL1 #138
Join Date: Oct 2008
Location: DfW - Texas
Posts: 4,552
Should be over 900flywheel and 1000tq

Quote:
Originally Posted by FloMoCamaro View Post
Any updates on this Monster?

Over 800 rwhp and well over 800 tq to the tires
ADM PERFORMANCE is offline   Reply With Quote
Old 12-18-2011, 06:40 PM   #27
silverfox
 
silverfox's Avatar
 
Drives: 2010 camaro ss
Join Date: Jun 2009
Location: portsmouth,va.
Posts: 502
Quote:
Originally Posted by ADM PERFORMANCE View Post
Over 800 rwhp and well over 800 tq to the tires
WOW! So much tq.
__________________
[SIGPIC][/SIGPIC]Va.Speed built 427 stroker
LS2 Darton sleeved 427 stroker.Callies dragonslayer crankshaft. Callies I beam rods. Wiseco blower pistons. Mast cnc 12 degree big bore ls3 heads-2.2 intake &1.6 ex. 6 bolt 270cc-.750 deck. Lunati link bar lifters.T&D roller rockers.COMP-VA. Speed special cam 605 lift, 238dur. Procharger F1R @15psi. ARH headers with custom 3'' exhaust all the way.Magnaflow mufflers. QTP cutouts.Rossler built 6l80e trans. DSS 1400hp axles.
Pfadt suspension.-Coilovers, sway bars,motor mounts,trailing arms. Aeromotive eliminater pump.
907rwhp.
silverfox is offline   Reply With Quote
Old 12-18-2011, 06:54 PM   #28
Camaro21


 
Camaro21's Avatar
 
Drives: 2013 M6 ZL1
Join Date: Jul 2009
Location: DFW, TX
Posts: 5,042
Here is my Final Dyno !! This is with a 50 shot... It made 903 rwhp and 1007 rwtq on a 150 shot and we had to back it down...Too much power and torque for now!! I left the car with Andy to upgrade the clutch and slave cylinder once again.. The slave cylinder is coming apart...

I can't tell you how happy I am with the results... Andy keeps impressing me.. Thanks Andy and everyone at ADM Performance !!
Attached Images
 
__________________
Camaro21 is offline   Reply With Quote
Old 12-18-2011, 07:10 PM   #29
Supercharged SS
Account Suspended
 
Drives: 2010 Camaro
Join Date: Feb 2010
Location: Sandy Hook, CT
Posts: 11,962
Quote:
Originally Posted by Camaro21 View Post
Here is my Final Dyno !! This is with a 50 shot... It made 903 rwhp and 1007 rwtq on a 150 shot and we had to back it down...Too much power and torque for now!! I left the car with Andy to upgrade the clutch and slave cylinder once again.. The slave cylinder is coming apart...

I can't tell you how happy I am with the results... Andy keeps impressing me.. Thanks Andy and everyone at ADM Performance !!
Hey Camaro 21,

Do you have the Maggie specific kit?
Supercharged SS is offline   Reply With Quote
Old 12-18-2011, 07:16 PM   #30
mikepage0007


 
mikepage0007's Avatar
 
Drives: 2010 camaro
Join Date: Aug 2009
Location: port st lucie ,florida
Posts: 4,269
ug-oh, looks like jamie shopping for more ted work...lol...
__________________
mikepage0007 is offline   Reply With Quote
Old 12-18-2011, 07:17 PM   #31
Camaro21


 
Camaro21's Avatar
 
Drives: 2013 M6 ZL1
Join Date: Jul 2009
Location: DFW, TX
Posts: 5,042
Quote:
Originally Posted by Supercharged SS View Post
Hey Camaro 21,

Do you have the Maggie specific kit?
I don't think so, but the picture on Post #1 shows the parts (I know it's not a close up).. I just told Andy I wanted NOS and he ordered the parts.. I have never had NOS before, so this will be a learning experience for me.. I will definately have to learn how to drive this AGAIN...
__________________
Camaro21 is offline   Reply With Quote
Old 12-18-2011, 07:44 PM   #32
mikepage0007


 
mikepage0007's Avatar
 
Drives: 2010 camaro
Join Date: Aug 2009
Location: port st lucie ,florida
Posts: 4,269
Quote:
Originally Posted by Camaro21 View Post
I don't think so, but the picture on Post #1 shows the parts (I know it's not a close up).. I just told Andy I wanted NOS and he ordered the parts.. I have never had NOS before, so this will be a learning experience for me.. I will definately have to learn how to drive this AGAIN...
looking at your build, i seem to have a similar build...whipple 2.9 with inwest 8rib and nos on a lsx...hoping to see numbers like you..that would be the 903rwhp and 1000 rwtq...lol
__________________
mikepage0007 is offline   Reply With Quote
Old 12-18-2011, 07:45 PM   #33
Camaro21


 
Camaro21's Avatar
 
Drives: 2013 M6 ZL1
Join Date: Jul 2009
Location: DFW, TX
Posts: 5,042
Quote:
Originally Posted by mikepage0007 View Post
looking at your build, i seem to have a similar build...whipple 2.9 with inwest 8rib and nos on a lsx...hoping to see numbers like you..
Sweet !! I can't wait to get it on the track next year !!
__________________
Camaro21 is offline   Reply With Quote
Old 12-18-2011, 07:47 PM   #34
mikepage0007


 
mikepage0007's Avatar
 
Drives: 2010 camaro
Join Date: Aug 2009
Location: port st lucie ,florida
Posts: 4,269
Quote:
Originally Posted by Camaro21 View Post
Sweet !! I can't wait to get it on the track next year !!
my only worry at this time is belt slip...did you ask andy how the belt was looking at that hp, or was it slipping??
__________________
mikepage0007 is offline   Reply With Quote
 
Reply

Tags
adm, adm performance, camaro21, nitrous, nos

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Lookie what I brought home Friday night 2010_1SS 5th Gen Camaro SS LS LT General Discussions 39 04-12-2010 10:31 PM
I Received A Different Letter From GM Steve 5th Gen Camaro SS LS LT General Discussions 734 09-25-2009 07:51 PM
Lookie who's Birthday it is! Mr Twisty Off-topic Discussions 22 01-20-2009 11:46 PM
lookie what i got for a late birthday present! Dave McFly Off-topic Discussions 1 05-31-2008 02:12 PM
Lookie what I got in the mail from Chevrolet. Dave McFly General Automotive + Other Cars Discussion 4 03-10-2007 09:45 PM


All times are GMT -5. The time now is 01:13 AM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2016, vBulletin Solutions, Inc.