Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Rick@Livernois
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Technical Camaro Topics > Cosmetics and Lighting Modification Discussions

Cosmetics and Lighting Modification Discussions External and Internal cosmetics modifications.

Reply
 
Thread Tools
Old 07-20-2012, 09:51 PM   #101
bumblebeecamaro
Car Lover By Nature
 
Drives: Mini Cooper S
Join Date: Dec 2009
Location: Central FL
Posts: 2,307
those look good but I still like my original splash guards better. they seem to go with more of the body contour than the ZL1 shields do.

no offense but the ZL1 splash guards kind of look like something that you'd find in the auto accessory section at Autozone.

just my .02 cents......
__________________
bumblebeecamaro is offline   Reply With Quote
Old 07-21-2012, 01:03 AM   #102
jameslk55

 
jameslk55's Avatar
 
Drives: 2012 2LT/RS, 2005 SLK55 AMG
Join Date: Jul 2012
Location: Falls Church, VA
Posts: 1,167
I think they look better than the original splash guards. However, the ZL1 splash guards still look incomplete without the ZL1 rear diffuser.
jameslk55 is offline   Reply With Quote
Old 07-26-2012, 10:47 AM   #103
2010camarolt

 
2010camarolt's Avatar
 
Drives: Victory Red 1LT
Join Date: Aug 2010
Location: Central Jersey
Posts: 2,119
i just installed my rear splash shields. slid them behind the wheel well and put the 3 screws back in. didnt take the wheel off. took me 15min. alot easier then i thought!
__________________
2010camarolt is offline   Reply With Quote
Old 07-26-2012, 06:36 PM   #104
KMAGRIZZ
 
KMAGRIZZ's Avatar
 
Drives: 2012 A6 RX Supercharged LFX
Join Date: Jun 2012
Location: Orange, Texas
Posts: 338
I ordered me some, they are headed my way now. Looks real good OP
KMAGRIZZ is offline   Reply With Quote
Old 08-13-2012, 07:22 PM   #105
rangomr
 
rangomr's Avatar
 
Drives: 45th Anniversary 2LT V6 Convertible
Join Date: Jul 2010
Location: South Boston, VA
Posts: 280
I tryed to order 22895336 & 22895337 from GMpartshouse.com & ShopChevyParts.com and they both came back NO such number. Where did every one order these rp1 stealth splash guards? Any help would be great. Michael in Virginia
rangomr is offline   Reply With Quote
Old 08-13-2012, 07:28 PM   #106
KMAGRIZZ
 
KMAGRIZZ's Avatar
 
Drives: 2012 A6 RX Supercharged LFX
Join Date: Jun 2012
Location: Orange, Texas
Posts: 338
Quote:
Originally Posted by rangomr View Post
I tryed to order 22895336 & 22895337 from GMpartshouse.com & ShopChevyParts.com and they both came back NO such number. Where did every one order these rp1 stealth splash guards? Any help would be great. Michael in Virginia
I got them from gmpartsdirect.com
KMAGRIZZ is offline   Reply With Quote
Old 08-13-2012, 07:47 PM   #107
rangomr
 
rangomr's Avatar
 
Drives: 45th Anniversary 2LT V6 Convertible
Join Date: Jul 2010
Location: South Boston, VA
Posts: 280
Quote:
Originally Posted by KMAGRIZZ View Post
I got them from gmpartsdirect.com
What did you do order two of the 336's & two of the 337?? Thanks for the place to order them from
rangomr is offline   Reply With Quote
Old 08-13-2012, 07:53 PM   #108
KMAGRIZZ
 
KMAGRIZZ's Avatar
 
Drives: 2012 A6 RX Supercharged LFX
Join Date: Jun 2012
Location: Orange, Texas
Posts: 338
Quote:
Originally Posted by rangomr View Post
What did you do order two of the 336's & two of the 337?? Thanks for the place to order them from
Just one of each. It's a left and a right
KMAGRIZZ is offline   Reply With Quote
Old 10-17-2012, 11:20 AM   #109
LowFlyer
 
LowFlyer's Avatar
 
Drives: 2013 2SS/RS Hurst G/FX AGM
Join Date: Aug 2012
Location: PA
Posts: 33
Yeah, I know, raising a long dead thread into a zombie thread.............

After reading the entire thread, I still don't see a definitive answer to, "Will the ZL1 rear splash shields fit on an SS w/factory GFX?



C.R. (The Invisible Poster)
LowFlyer is offline   Reply With Quote
Old 10-18-2012, 05:31 PM   #110
C-redfly

 
C-redfly's Avatar
 
Drives: 2012 completely Red Camaro
Join Date: Aug 2012
Location: Los Angeles
Posts: 813
Quote:
Originally Posted by Lukeko View Post
Ofer - we're you able to install the front splash guards. Also do you either of you think that if you got an extra set of the rear splash guard as depicted in this thread, it could be installed in the rear of the front wheel well to give added protection to the gill area? I'm not sure if the side rocker alone is enough protection?

Thanks.
I only rear the first page of the thread. Great ?, did it get answered?
C-redfly is offline   Reply With Quote
Old 10-18-2012, 05:47 PM   #111
C-redfly

 
C-redfly's Avatar
 
Drives: 2012 completely Red Camaro
Join Date: Aug 2012
Location: Los Angeles
Posts: 813
Quote:
Originally Posted by LowFlyer View Post
Yeah, I know, raising a long dead thread into a zombie thread.............

After reading the entire thread, I still don't see a definitive answer to, "Will the ZL1 rear splash shields fit on an SS w/factory GFX?



C.R. (The Invisible Poster)
Yea they bolt up to the 2012 perfect. The splash shields re-use the 3 screws holding the inside fender cover thingy in place. Im not sure bout other years.
C-redfly is offline   Reply With Quote
Old 11-13-2012, 11:47 AM   #112
ChrisBlair
Buick 455 Fan
 
Drives: 1970 Buick, 2012 1SS LS3
Join Date: Jun 2010
Location: Boston MA
Posts: 3,453
Any p/ns for the front?

22895336 and 22895337 are left and right rear

Thanks
__________________
ChrisBlair is offline   Reply With Quote
Old 01-07-2013, 05:19 PM   #113
Minge
 
Drives: 2013 2SS
Join Date: Sep 2012
Location: Minneapolis
Posts: 269
Sorry for bringing this thread back from the dead but I would like to know the part numbers for the front guards as well. I was quoted today by a well respected vendor here on this forum a price that is nearly double for the fronts versus the rears, can this be correct? I see no reason it should be but the fronts are north of 50 bucks each..anyone clear this up for me?

Thanks
Minge is offline   Reply With Quote
Old 01-08-2013, 07:27 AM   #114
flht99b

 
flht99b's Avatar
 
Drives: 2010 Camaro 2SS/RS RJT
Join Date: May 2009
Location: Knoxville
Posts: 1,302
Correct, the front "air deflectors" are $50+ each, don't know why but they are. They install to the front of the wheel well, not the rear of the wheel well so they do nothing to protect the side of the car from debris. They are meant to direct air around the front tires of the ZL1, part of the overall aero package on those cars.
Ed M.
__________________
RJT 2SS/RS, AAM 3.70's, MTI Sway Bars, Shifter & SS brake lines, BMR Trailing & Toe Arms, full rear cradle & diff bushings, Pedders XA's, Camber/Toe eccentrics, Radius arm inserts, Hawk HPS Brake pads, GTO clutch reservoir, LS9 cam, Comp Cam valve springs, Melling 10296 oil pump, CR 5 timing chain, LS2 damper, CAI Cold Air Induction, ARH LT headers w/HF cats, GMPP touring axle back, Elite Engineering Catch Can, Forgeline 20x9 & 20x11 DS3 wheels w/Vredstein 275/40/20 & 315/35/20 tires, '11 Convertible spoiler, Lloyd "SS" Floor Mats, GM Camaro Trunk Mat, GM SS Fender & LS3 Emblems.
flht99b is offline   Reply With Quote
Old 01-12-2013, 12:54 PM   #115
Lite-Right

 
Lite-Right's Avatar
 
Drives: 2012 Camaro RS
Join Date: Sep 2012
Location: Treasure Island, FL
Posts: 236
Just installed the ZL1 Splash Guards on my 2012 RS Vert.
They are the perfect blend of form, fit and function.

You don't even notice that they are there, but they do a great job of keeping road tar off the lower rear quarter panels.
Well worth the $65 a pair, including shipping.

Here are a few pics.

--Keith





Lite-Right is offline   Reply With Quote
Old 01-19-2013, 04:37 PM   #116
kosmo
Going Broke
 
kosmo's Avatar
 
Drives: 2010 CGM 2SS/RS M6
Join Date: Nov 2009
Location: St. Marys, OH
Posts: 323
Decided to install mine today. Dremeled off the two "nubs" on the back around the top hole. Allowed the top to mount a little more flush.
Attached Images
   
kosmo is offline   Reply With Quote
Old 05-08-2013, 04:58 PM   #117
One-Bad-ZL1
So easy to love Camaros
 
One-Bad-ZL1's Avatar
 
Drives: 2013 ZL1 VR #3457
Join Date: Feb 2012
Location: Marlborough, CT
Posts: 2,774
Send a message via Yahoo to One-Bad-ZL1
if you're looking for a set of front Rock/Splash guards that match your ZL1 guards PM me.
__________________

Last edited by One-Bad-ZL1; 07-04-2013 at 03:50 PM.
One-Bad-ZL1 is offline   Reply With Quote
Old 06-03-2013, 03:25 PM   #118
mr_lurch
 
mr_lurch's Avatar
 
Drives: 2010 ZL575 - 1973 Z28
Join Date: Feb 2013
Location: Stafford, VA
Posts: 34
So, the video that Ofer posted was of P/N 22895336/37 which are for behind the rear tires trim and flipped around and placed infront of the front tires (air deflectors)? What is/are the part numbers for ZL1 Splash guards for behind the front wheels and what is being used in front of the rear tires as "air deflectors". Basically can anyone put the part numbers on here to cover both the splash guards (behind the tires protecting our rockers etc.) and the "air deflectors" for infront of the tires for both front and rear?
mr_lurch is offline   Reply With Quote
Old 06-06-2013, 01:39 PM   #119
mr_lurch
 
mr_lurch's Avatar
 
Drives: 2010 ZL575 - 1973 Z28
Join Date: Feb 2013
Location: Stafford, VA
Posts: 34
Found this today:
ZL1 Part Numbers:
  • Strut Tower Brace (LT, SS, 1LE) - 22756880
  • Wheel Hubs (ZL1, 1LE) (4) - 25954415
  • Front Coil Spring (SS, 1LE) (2) - 92245257
  • Front Strut (1LE) (passenger side) - 22812984
  • Front Strut (1LE) (driver side) - 22812985
  • Front Sway Bar (1LE) - 22812946
  • Front Sway End Link (SS, ZL1, 1LE) (passenger side) - 22842515
  • Front Sway End Link (SS, ZL1, 1LE) (driver side) - 22842516
  • Rear Shock Mount (ZL1, 1LE) (passenger side upper) - 22836734
  • Rear Shock Mount (ZL1, 1LE) (driver side upper) - 22836727
  • Rear Coil Spring (SS, 1LE) (2) - 92195466
  • Rear Shocks (1LE) (2) - 22812987
  • Rear Sway Bar (ZL1, 1LE) - 22786260
  • Rear Sway Bar Endlink (SS, ZL1, 1LE) (2) - 22761221
  • Rear Lower Control Arm (SS, ZL1, 1LE) (2) - 20942237 (Needed for 2010-2011 car conversion)
  • Rear Toe Link (ZL1, 1LE) (2) - 22845487
  • 3.91 Gears only ( 1LE ) - 22813040
  • Front Splitter kit ( 1LE ) - 22950575
  • Wheels 20x10 Black ( ZL1-1LE ) - 22798741
  • Wheels 20x11 Black ( ZL1-1LE ) - 22798743
  • 2012 Black Painted Hood Insert - 22849323
  • 2012-13 "Exposed" Hood Insert - 22845156
  • Shifter Boot-Suede - 24261464
  • Shifter Boot-Leather - 24263725
  • Steering Wheel-Suede - 22813848
  • Steering Wheel-Leather - 22813852
  • Rear Spoiler - 22828467
  • Fog Light-LH/RH - 10335108
  • Fog Light Bezel-LH - 22895339
  • Fog Light Bezel-RH - 22895338
  • Front Lower Fascia/Splitter - 22894223
  • Front Fascia - 22831868
  • Wheel Polished Front - 9599037
  • Wheel Polished Rear - 9599038
  • Emblem "ZL1" Hood - 22830718
  • Emblem "ZL1" RR.Deck - 22830719
  • Fender:RH - 20943622
  • Fender:LH - 20943621
  • Liner-Frt Whl Hse-LH - 20952837
  • Liner-Frt Whl Hse-RH - 20952838
  • Valance Kit For Front Wheel House-Liners - 22757643 (These are the two wheel liner extensions on the bottom, they come in a kit and dealer must install these as part of the PDI procedure)
  • Extension-Frt Whl Hse-LH - 22895341
  • Extension-Frt Whl Hse-RH - 22895340 (These are the pieces that "stick-out" of the front of the wheelhouse-liners,also called "guards")
  • Hood - 22824393
  • ZL1 Grille - 22893907
  • ZL1 Grille Emblem - 22830717
  • ZL1 Headlamp Housing - LH-20981021 / RH-20981022 (Same as other "RS" Camaro's)
  • ZL1 Dash Emblem - Dash ZL1 emblem only part of trim piece applique - 22967691
  • Camaro Emblem - 22752666 (Same as other Camaro's)
  • ZL1 Rear Bumper - 22894196
  • ZL1 Rear Valence - 22894221
  • ZL1 Rear Fascia Splash Shields - LH - 22895337 / RH-22895336
  • ZL1 Exhaust Tips - Not Available Separately- Must Buy Complete"CAT-BACK" SYSTEM - 22874269
  • ZL1 Exhaust Heat Shields - LH - 20957053 / RH - 20957052
  • ZL1 Rear Diff Housing - 22860925 (This is an empty housing-NO internals)
  • ZL1 Gears A/M 3.23 / 3.73 - 3.23 - 22835277 / 3.73 - 22835278 (Ring and pinion gears only)
  • ZL1 Complete Differential Asm. w/Internals - 3.23 - 20931134 / 3.73 - 20931133
  • Front Seat Cover Driver Bottom - 20996226
  • Front Seat Cover Driver Back - 22795649
  • Front Seat Cover Passenger Bottom - 20996215
  • Front Seat Cover Passenger Back - 22795669
  • Headrests (complete assemblies,no separate covers available) - LH/RH are the same - 20996228
  • Rear Seat Covers Bottom - 20996254
  • Rear Seat Covers Back - 20996242
mr_lurch is offline   Reply With Quote
Old 07-04-2013, 12:46 PM   #120
camguy
 
Drives: Dodge Dakota
Join Date: Feb 2011
Location: Canada
Posts: 3
Wink Another possible option ?

Quote:
Originally Posted by Tribute View Post
Ofer - .... Also do you either of you think that if you got an extra set of the rear splash guard as depicted in this thread, it could be installed in the rear of the front wheel well to give added protection to the gill area? I'm not sure if the side rocker alone is enough protection?

Thanks.
Quote:
Originally Posted by bee sting View Post
....What's the purpose of the fronts ? Doesn't look like these would keep things from flying up and hitting the sides of the car. Plus will these bolt up to a stock nose .
Quote:
Originally Posted by twentytwelvebee View Post
looks to me like the front is a cosmetic mod. i dont know why GM didnt make some for the front to face the rear. maybe they figured the rockers provide enough protection.
Quote:
Originally Posted by edog View Post
Not bad, but I must say I like my original better.

Very nice for the money though.
Tribute, Bee sting, & 2012bee bring up serious valid points ... none of these are long enough to adequately protect from the sand blasting assault of road rash, tar, salt and in the case of Edog, though they look OK molded splash guards that wrap around the fender are renown for sealing in moister mixed with sand salt and acid rain. I prefer to see as much factory paint as possible.

When the SVT Ford Raptor ( below ) was launched with extra wide tires Ford engineers felt the ventilated step bars would protect the truck from road rash. It didn't. they had a "huge" problem with rock chips so they sourced a solution that complimented the sleek lines of the Raptors louvered Hood, fender and side gills/vents. On one forum, even when raptor owners complained to the engineers about the huge problem they (engineers )maintained that that's what the step bars were engineered to do ... NOT ! ...as a result these air extractor'd high performance splash guards became the most popular selling splashguards for this truck.

They also make'm for tuners and high performance cars ...

Just like lemans closed wheel racing the air flows through the vents to help cool tires and brakes from otherwise recirculated ( heated ) air in the fender cavity. During rain, just as Ferrari, Mercedes, Porsche, charger, inner vented fender wells optimize cooling while dispersing rain from fenderwells for max traction, this tech appears to be a literal extension of already proven race tech but applied to spray guards, underscoring the ultimate solution to achieving max protection for high performance cars, and in the case of the camero further enhancing the sleek lines and smooth contours of its own louvered hood, side and rear diffusers/gills accomplishing the best of both worlds.



http://www.vortexsplashguards.ca/res...sx-concept.jpg
Attached Images
 
camguy is offline   Reply With Quote
Old 07-04-2013, 12:59 PM   #121
911medic

 
911medic's Avatar
 
Drives: 2012 SIM 2LT/1970 Camaro
Join Date: Nov 2012
Location: Near Minneapolis, MN
Posts: 1,354
Sorry, but those vented guards look like shit on the "camero."

Do you write copy for the company's products? That was like reading an ad.

EDIT: Never mind. This guy's first (and so far only) two posts are promoting these vented guards. Some kind of shill.
__________________
All bleeding stops eventually -- My journal thread
Roto-Fab Intake & W/W Relocate Kit -- ADM Race Scoop -- Dynomax VT Axle-Back Exhaust
Drake Bowtie Delete -- JacFab Radio Face Cover -- LED Fog Lights -- LED Dome/Trunk/Plate Lights
Wishlist: VMax Ported TB -- Dash ABL -- Footwell/Cupholder/Door Pull/Homelink Button Lighting
911medic is offline   Reply With Quote
Old 07-04-2013, 01:27 PM   #122
camguy
 
Drives: Dodge Dakota
Join Date: Feb 2011
Location: Canada
Posts: 3
911 Medic

right your are then ... and I really do mean that. Just trying to make a difference. Personal taste is what makes the world go around ... its hard to imagine ...there are folks who don't even like the look of the Camaro or anything GM or anything Ford etc. I say more power to'm ... thank goodness not everyone wants one ... afterall variety is the spice of life. Can you imagine all being the same ? Having a voice is what makes America so great. Seems everyone on the forum are looking for options ... Cheers

Happy independance day to all !
camguy is offline   Reply With Quote
Old 05-05-2014, 10:44 AM   #123
cliffdog89
 
cliffdog89's Avatar
 
Drives: 2LT/RS M6 '12 Camaro
Join Date: Aug 2012
Location: New Jersey
Posts: 300
when I pull up the part number on GM Parts House numbers there is an option for the 2012 and 2013 - is there a difference?
__________________
cliffdog89 is offline   Reply With Quote
Old 05-14-2014, 07:35 AM   #124
CamaroLS

 
CamaroLS's Avatar
 
Drives: 2011 Yellow Chevy Camaro LS
Join Date: Feb 2012
Location: Indiana
Posts: 1,133
Wanting to do this.
__________________
Roto-Fab intake, Vmax throttle body, Painted engine and fuse covers, Strut brace, Elite catch can, Custom yellow vinyl dash and door inserts, Center console gauges, Kicker stereo system, ZL1 pedals, ZL1 Rockers, Rear spoiler, SS Brembo brakes, Russell S.S. brake lines, 20" staggered Foose Legend wheels with Nitto Invo tires.
CamaroLS is offline   Reply With Quote
Old 05-14-2014, 09:15 AM   #125
CamaroI


 
Drives: 2010 IOM Camaro
Join Date: Aug 2012
Location: DFW
Posts: 2,822
ZL1 rear splash shields installed

I have a brand new set in box not using will part with 80 plus shipping. Front and back


Sent from my iPhone using Tapatalk
CamaroI is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Shno's House of Z Number 3 Camaro Z/28 Forum - Z/28 Specific Topics 14830 Yesterday 10:54 PM
CAMARO WIKI Tran Wiki 47 02-19-2014 03:23 PM
BREAKING: 2012 CAMARO ZL1 - 6.2L LSA Supercharged - 6MT Revealed! Tran Camaro ZL1 Forum - ZL1 Specific Topics 756 05-01-2013 06:22 AM
Ten Classic Chevys to Look for at Woodward Dream Cruise, Including Camaro ZL1 Tran 5th Gen Camaro SS LS LT General Discussions 24 08-19-2011 07:47 AM
JRE 3.73 rear end w/ posi installed.....questions Fiftydriver V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6) 4 04-17-2011 07:04 PM


All times are GMT -5. The time now is 03:32 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.