Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Kraft Werks
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > General Camaro Forums > Regional Forums > USA - Texas

USA - Texas Lone Star State

Reply
 
Thread Tools
Old 09-21-2013, 01:39 PM   #1
sasquash1984
502 RWHP N/A
 
sasquash1984's Avatar
 
Drives: The yeti
Join Date: May 2009
Location: Saginaw/ Ft Worth TX
Posts: 3,076
3600 installed

Got car back after 2 weeks waiting on re stall feels good only have driven on street hitting up kennadale tomorrow after noon to see what it does
__________________
sasquash1984 is offline   Reply With Quote
Old 09-21-2013, 02:39 PM   #2
rich3fan
What's this button do?
 
rich3fan's Avatar
 
Drives: 2013 SIM 2SS/RS L99
Join Date: Apr 2013
Location: Wylie, Texas
Posts: 1,185
__________________
2013 SIM 2SS/RS - LGM Super Pro headers w/3" catback - Circle D Pro 1E - ADM Race Intake w/ADM Scoop - BWPTB - Elite Catch Can - Peak HP: 373/Peak TQ: 375
rich3fan is offline   Reply With Quote
Old 09-21-2013, 04:12 PM   #3
Juice2SS

 
Drives: 2011 2SS
Join Date: Jan 2013
Location: DFW, TX
Posts: 760
Is the sig accurate for your best time?
__________________
2011 2SS Black/Black
GPI SS3 VVT cam, GPI intake, Stanless Power 1 7/8" LTs with cats, MagnaFlow 3" exhaust, VMAX TB, Vararam Tune CAI, PowerBond 25% UDP, Yank SS 3600, Posi Mod, DriveShaft Shop aluminum DS, ADM Cooler, 3.45s, Spohn Trailing Arms, Spohn Toe Rods, Rhino Tuned, Race Star Bigs/Littles 17"/18", Angel Eyes
7.29 @ 94.39 in 3100+ DA
Juice2SS is offline   Reply With Quote
Old 09-21-2013, 05:20 PM   #4
sasquash1984
502 RWHP N/A
 
sasquash1984's Avatar
 
Drives: The yeti
Join Date: May 2009
Location: Saginaw/ Ft Worth TX
Posts: 3,076
Before the 3600 yes, going tomorrow to change that lol
__________________
sasquash1984 is offline   Reply With Quote
Old 09-21-2013, 05:43 PM   #5
62nalide


 
62nalide's Avatar
 
Drives: 2013 SS
Join Date: May 2013
Location: DFW
Posts: 2,261
Cool, sub 11s?
__________________
VVT cam equipped.
N/A 6.2L 7.20s in the 1/8!
11.26 @ 124.11 mph in the 1/4
62nalide is offline   Reply With Quote
Old 09-21-2013, 06:26 PM   #6
sasquash1984
502 RWHP N/A
 
sasquash1984's Avatar
 
Drives: The yeti
Join Date: May 2009
Location: Saginaw/ Ft Worth TX
Posts: 3,076
Going to 1/8 mile track tomorrow 1/4 mile aren't open often not gonna see 1/4 mile till Camaro vs mustang until then I need to practice launching and getting better 60 fts
__________________
sasquash1984 is offline   Reply With Quote
Old 09-21-2013, 06:27 PM   #7
rich3fan
What's this button do?
 
rich3fan's Avatar
 
Drives: 2013 SIM 2SS/RS L99
Join Date: Apr 2013
Location: Wylie, Texas
Posts: 1,185
Track conditions should be near perfect tomorrow sasquash.
__________________
2013 SIM 2SS/RS - LGM Super Pro headers w/3" catback - Circle D Pro 1E - ADM Race Intake w/ADM Scoop - BWPTB - Elite Catch Can - Peak HP: 373/Peak TQ: 375
rich3fan is offline   Reply With Quote
Old 09-21-2013, 06:30 PM   #8
sasquash1984
502 RWHP N/A
 
sasquash1984's Avatar
 
Drives: The yeti
Join Date: May 2009
Location: Saginaw/ Ft Worth TX
Posts: 3,076
Gonna get some data logs done tomorrow curtesy of white ss
__________________
sasquash1984 is offline   Reply With Quote
Old 09-21-2013, 07:21 PM   #9
white ZL1

 
white ZL1's Avatar
 
Drives: 2013 ZL1 #7922
Join Date: Aug 2011
Location: DFW area
Posts: 1,475
Tomorrow's weather is going to be very similar to today's, and the DA is right around 2000'. So while it might be "nice" outside, the weather is far from perfect IMO.
Wait until a cool night late in October or in November when the DA gets under zero. That's about as perfect as it gets here.

If sasquash's car will hook tomorrow, it'll go 7.60's and maybe get into the 50's.
__________________

2013 ZL1 #7922
ADM CAI, 90mm tb, 9.55 lower, LS9 cam, ID 1000s, SW 1 7/8" headers, ADM/Ron Davis hx
white ZL1 is offline   Reply With Quote
Old 09-21-2013, 07:30 PM   #10
rich3fan
What's this button do?
 
rich3fan's Avatar
 
Drives: 2013 SIM 2SS/RS L99
Join Date: Apr 2013
Location: Wylie, Texas
Posts: 1,185
Gee thanks for the clarification Mr. Accuweather!
__________________
2013 SIM 2SS/RS - LGM Super Pro headers w/3" catback - Circle D Pro 1E - ADM Race Intake w/ADM Scoop - BWPTB - Elite Catch Can - Peak HP: 373/Peak TQ: 375
rich3fan is offline   Reply With Quote
Old 09-21-2013, 08:25 PM   #11
Camarojt

 
Camarojt's Avatar
 
Drives: 2011camaro SS
Join Date: Nov 2012
Location: Allen, Tx
Posts: 1,716
What was the stall rated before you restalled it? And what was ur 60ft on your sig pass?
Camarojt is offline   Reply With Quote
Old 09-21-2013, 09:49 PM   #12
sasquash1984
502 RWHP N/A
 
sasquash1984's Avatar
 
Drives: The yeti
Join Date: May 2009
Location: Saginaw/ Ft Worth TX
Posts: 3,076
Quote:
Originally Posted by Camarojt View Post
What was the stall rated before you restalled it? And what was ur 60ft on your sig pass?
it was a 2800, 1.888 60 ft with that 2800, 2800 wasnt cutting it i now have the same set up as white ss so....with his experience with his car and data logging and practice i should run his times on a good cool day with good da
__________________
sasquash1984 is offline   Reply With Quote
Old 09-21-2013, 10:03 PM   #13
Camarojt

 
Camarojt's Avatar
 
Drives: 2011camaro SS
Join Date: Nov 2012
Location: Allen, Tx
Posts: 1,716
U are running his old cam right?
Camarojt is offline   Reply With Quote
Old 09-21-2013, 10:32 PM   #14
white ZL1

 
white ZL1's Avatar
 
Drives: 2013 ZL1 #7922
Join Date: Aug 2011
Location: DFW area
Posts: 1,475
His car is the same setup as mine was, only his heads were milled (should be worth a few hp) and he's about 100lbs lighter than I am.
Car should be good for an 11.4x in GREAT air.
__________________

2013 ZL1 #7922
ADM CAI, 90mm tb, 9.55 lower, LS9 cam, ID 1000s, SW 1 7/8" headers, ADM/Ron Davis hx
white ZL1 is offline   Reply With Quote
Old 09-21-2013, 10:49 PM   #15
sasquash1984
502 RWHP N/A
 
sasquash1984's Avatar
 
Drives: The yeti
Join Date: May 2009
Location: Saginaw/ Ft Worth TX
Posts: 3,076
Quote:
Originally Posted by Camarojt View Post
U are running his old cam right?
Well not his cam I had my lpe gt-11 in before he did his
__________________
sasquash1984 is offline   Reply With Quote
Old 09-22-2013, 07:09 AM   #16
Camarojt

 
Camarojt's Avatar
 
Drives: 2011camaro SS
Join Date: Nov 2012
Location: Allen, Tx
Posts: 1,716
Quote:
Originally Posted by white 2SS/RS View Post
His car is the same setup as mine was, only his heads were milled (should be worth a few hp) and he's about 100lbs lighter than I am.
Car should be good for an 11.4x in GREAT air.
Quote:
Originally Posted by sasquash1984 View Post
Well not his cam I had my lpe gt-11 in before he did his
I agree 100% with that. Dan I believe you had 11.50 in yours with some weight out so his may go 11.30-11.40's in negative DA.

I was meaning the same cam that Dan was running. Lol
Camarojt is offline   Reply With Quote
Old 09-22-2013, 07:53 AM   #17
sasquash1984
502 RWHP N/A
 
sasquash1984's Avatar
 
Drives: The yeti
Join Date: May 2009
Location: Saginaw/ Ft Worth TX
Posts: 3,076
Quote:
Originally Posted by Camarojt View Post
I agree 100% with that. Dan I believe you had 11.50 in yours with some weight out so his may go 11.30-11.40's in negative DA.

I was meaning the same cam that Dan was running. Lol
, 4:30 @ kennadale today
__________________
sasquash1984 is offline   Reply With Quote
Old 09-22-2013, 10:42 AM   #18
Camarojt

 
Camarojt's Avatar
 
Drives: 2011camaro SS
Join Date: Nov 2012
Location: Allen, Tx
Posts: 1,716
I'm gonna say if you can run at least a 1.64 60ft today you will run between 11.75-11.90
Depending on DA and traction and if your tune and shift points are on.
Camarojt is offline   Reply With Quote
Old 09-22-2013, 10:47 AM   #19
white ZL1

 
white ZL1's Avatar
 
Drives: 2013 ZL1 #7922
Join Date: Aug 2011
Location: DFW area
Posts: 1,475
Kennedale is only 1/8 mile. I think sasquash's goal today is going to be getting the car to 60 foot. Plus it'll allow us to get some datalogs of his car and get it ready for October 5th.
__________________

2013 ZL1 #7922
ADM CAI, 90mm tb, 9.55 lower, LS9 cam, ID 1000s, SW 1 7/8" headers, ADM/Ron Davis hx
white ZL1 is offline   Reply With Quote
Old 09-22-2013, 10:55 AM   #20
sasquash1984
502 RWHP N/A
 
sasquash1984's Avatar
 
Drives: The yeti
Join Date: May 2009
Location: Saginaw/ Ft Worth TX
Posts: 3,076
Exactly Dan , mainly testing to see if it will hook and 60 fts
__________________
sasquash1984 is offline   Reply With Quote
Old 09-22-2013, 12:32 PM   #21
Camarojt

 
Camarojt's Avatar
 
Drives: 2011camaro SS
Join Date: Nov 2012
Location: Allen, Tx
Posts: 1,716
Gotcha. Should be around 1.6x 60ft and 7.5x-7.6x 1/8th.
Camarojt is offline   Reply With Quote
Old 09-22-2013, 01:08 PM   #22
rforbes

 
rforbes's Avatar
 
Drives: IOM SS/RS
Join Date: Mar 2009
Location: The Colony, Texas
Posts: 767
Well could not go to Dallas raceway Friday night because of the rain so I think I will go get some runs in at Rice Killers next Thursday if anyone wants to join. And it is only 10 bucks!
rforbes is offline   Reply With Quote
Old 09-22-2013, 01:36 PM   #23
sasquash1984
502 RWHP N/A
 
sasquash1984's Avatar
 
Drives: The yeti
Join Date: May 2009
Location: Saginaw/ Ft Worth TX
Posts: 3,076
I'm always down
__________________
sasquash1984 is offline   Reply With Quote
Old 09-22-2013, 07:12 PM   #24
sasquash1984
502 RWHP N/A
 
sasquash1984's Avatar
 
Drives: The yeti
Join Date: May 2009
Location: Saginaw/ Ft Worth TX
Posts: 3,076
7.60 best so far temps starting to drop now
__________________
sasquash1984 is offline   Reply With Quote
Old 09-22-2013, 08:28 PM   #25
Camarojt

 
Camarojt's Avatar
 
Drives: 2011camaro SS
Join Date: Nov 2012
Location: Allen, Tx
Posts: 1,716
How late are they running tonight?
Camarojt is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:31 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.