Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Flowmaster Exhaust
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Engine | Drivetrain | Powertrain Technical Discussions > V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6)

V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6) Driveshafts | Differentials | Gears | Rearends | Clutch | Shifters

Reply
 
Thread Tools
Old 03-04-2012, 08:06 PM   #1
fastlane2010
 
fastlane2010's Avatar
 
Drives: 2010 camaro with fast lane stage 2
Join Date: Apr 2011
Location: hagerstown
Posts: 628
grenaded clutch

ok so here's my bad news i was at the drag strip yesterday and was going good at first because the first time i ran a m6 at a dragstrip and went a 12.7 with street tires and they where sitting at 35psi so the second pass i run a 12.4 at 117mph so i took a break and let the car cool down but an hr goes by and i go back out for a third pass and screw up off the line and end up running a 13.2 so when i get back inline and im waiting i am thinking of what i did wrong so i get up there and try and dry the tires off because you cant go around the water blocks so i feel a bad wheel hop in the right rear then i wanting to just give it hell and when i launched at 3500 the clutch couldnt hold it and just let loose suspose to be 485hp to the wheels and so when i got home with the car on the trailer i looked further into it and found the clucth is gone as per say grenaded so i need a new clutch


so anybody with clutch experince and vendors with deals what clutch should i buy
__________________
12.4 in 1/4 at 117mph first time
custom 2tone paint fastlane stage 2 hydroformed carbon fiber cowl and cluster kooks headers and 3" xpipe with pypes axle back

fastlane2010 is offline   Reply With Quote
Old 03-04-2012, 08:17 PM   #2
Hendrix-Engineering
Account Suspended
 
Drives: First 9 inch-12 bolt IRS Camaro
Join Date: Jun 2009
Location: nc
Posts: 1,839
Love your car by the way ..Check out StreetSlayer.com and give us a call,getting a great clutch now beats getting 2 or 3 decent clutches over the next year or so.The StreetSlayer drives better than stock and is rebuildable when the time comes.Give us a call and will be glad to help you with a great clutch
Hendrix-Engineering is offline   Reply With Quote
Old 03-06-2012, 08:13 PM   #3
fastlane2010
 
fastlane2010's Avatar
 
Drives: 2010 camaro with fast lane stage 2
Join Date: Apr 2011
Location: hagerstown
Posts: 628
yeah that is what i am looking for is a clucth that will hold up to around 750 or so looking ahead lol
__________________
12.4 in 1/4 at 117mph first time
custom 2tone paint fastlane stage 2 hydroformed carbon fiber cowl and cluster kooks headers and 3" xpipe with pypes axle back

fastlane2010 is offline   Reply With Quote
Old 03-06-2012, 08:17 PM   #4
fastlane2010
 
fastlane2010's Avatar
 
Drives: 2010 camaro with fast lane stage 2
Join Date: Apr 2011
Location: hagerstown
Posts: 628
just looked at your prices and they are way out of the price range that i am willing to pay how do they compare to the ram and the monster clutches
__________________
12.4 in 1/4 at 117mph first time
custom 2tone paint fastlane stage 2 hydroformed carbon fiber cowl and cluster kooks headers and 3" xpipe with pypes axle back

fastlane2010 is offline   Reply With Quote
Old 03-06-2012, 08:27 PM   #5
Hendrix-Engineering
Account Suspended
 
Drives: First 9 inch-12 bolt IRS Camaro
Join Date: Jun 2009
Location: nc
Posts: 1,839
Quote:
Originally Posted by fastlane2010 View Post
just looked at your prices and they are way out of the price range that i am willing to pay how do they compare to the ram and the monster clutches
You will not get a single to hold 750rwhp,and the StreetSlayer twin is one of the least exspensive twins on the market,keep in mind when the time comes you can rebuild your twin for the price of a single.Looking at your car and your mods your not one to MAKE DO,you want the best, you want a StreetSlayer,youll never regret buying the best ..Call me if you have any questions and want your camaro 5 price
Hendrix-Engineering is offline   Reply With Quote
Old 03-06-2012, 08:53 PM   #6
fastlane2010
 
fastlane2010's Avatar
 
Drives: 2010 camaro with fast lane stage 2
Join Date: Apr 2011
Location: hagerstown
Posts: 628
but is the twin a streetable clutch its also my daily driver
__________________
12.4 in 1/4 at 117mph first time
custom 2tone paint fastlane stage 2 hydroformed carbon fiber cowl and cluster kooks headers and 3" xpipe with pypes axle back

fastlane2010 is offline   Reply With Quote
Old 03-06-2012, 11:17 PM   #7
Hendrix-Engineering
Account Suspended
 
Drives: First 9 inch-12 bolt IRS Camaro
Join Date: Jun 2009
Location: nc
Posts: 1,839
Quote:
Originally Posted by fastlane2010 View Post
but is the twin a streetable clutch its also my daily driver
If you ask anyone with the StreetSlayer they will tell you its the best clutch theve every driven hands down.If you buy a StreetSlayer and you dont love it ill buy it back.
Hendrix-Engineering is offline   Reply With Quote
Old 03-07-2012, 10:16 AM   #8
fastlane2010
 
fastlane2010's Avatar
 
Drives: 2010 camaro with fast lane stage 2
Join Date: Apr 2011
Location: hagerstown
Posts: 628
ok pm me prices of the clutches
__________________
12.4 in 1/4 at 117mph first time
custom 2tone paint fastlane stage 2 hydroformed carbon fiber cowl and cluster kooks headers and 3" xpipe with pypes axle back

fastlane2010 is offline   Reply With Quote
Old 03-07-2012, 10:23 AM   #9
Hyp
I've been lost...
 
Hyp's Avatar
 
Drives: 2010 SW 2SS/RS W/IOM LSA Swap
Join Date: Nov 2009
Location: DFW, Texas
Posts: 460
I went with a Spec Stage 3 clutch from Tick Performance for dirt cheap. It'll hold 809ftlb of torque.
Hyp is offline   Reply With Quote
Old 03-07-2012, 10:48 AM   #10
Camaro21


 
Camaro21's Avatar
 
Drives: 2010 2SS/RS M6
Join Date: Jul 2009
Location: DFW, TX
Posts: 5,042
I have the Lingenfelter Max-Cx Twin Disk Clutch Kit in mine that was installed by Andy at ADM Performance. The clutch is VERY Streetable and hold up to at least 800rwhp on my Camaro.

HERE is a link to it on Link to it from the Lingenfelter's Website. Call Andy at ADM and he can hook you up !!
__________________
Camaro21 is online now   Reply With Quote
Old 03-07-2012, 10:56 AM   #11
John@AutoAgenda
 
John@AutoAgenda's Avatar
 
Drives: 2004 GTO
Join Date: Feb 2012
Location: Scottsdale, Az
Posts: 124
If you plan on continuing to race the car don't cheap out on the clutch especially if it's a daily driver. We have heard nothing but rave reviews about the Lingenfelter and Street Slayer setup's especially in higher hp applications.
John@AutoAgenda is offline   Reply With Quote
Old 03-07-2012, 08:48 PM   #12
fastlane2010
 
fastlane2010's Avatar
 
Drives: 2010 camaro with fast lane stage 2
Join Date: Apr 2011
Location: hagerstown
Posts: 628
yeah i do plan on a little bit but not much more of street machine and what about the ram 9.5 clutch i would like to be able to get a hole kit for about 1k that holds alot
__________________
12.4 in 1/4 at 117mph first time
custom 2tone paint fastlane stage 2 hydroformed carbon fiber cowl and cluster kooks headers and 3" xpipe with pypes axle back

fastlane2010 is offline   Reply With Quote
Old 03-07-2012, 08:57 PM   #13
mikepage0007


 
mikepage0007's Avatar
 
Drives: 2010 camaro
Join Date: Aug 2009
Location: port st lucie ,florida
Posts: 4,274
drove tommy,s car{ hendrix} great feeling clutch..
__________________
mikepage0007 is offline   Reply With Quote
Old 03-07-2012, 09:22 PM   #14
fastlane2010
 
fastlane2010's Avatar
 
Drives: 2010 camaro with fast lane stage 2
Join Date: Apr 2011
Location: hagerstown
Posts: 628
yeah that is what i would like to do
__________________
12.4 in 1/4 at 117mph first time
custom 2tone paint fastlane stage 2 hydroformed carbon fiber cowl and cluster kooks headers and 3" xpipe with pypes axle back

fastlane2010 is offline   Reply With Quote
Old 03-11-2012, 06:35 AM   #15
fastlane2010
 
fastlane2010's Avatar
 
Drives: 2010 camaro with fast lane stage 2
Join Date: Apr 2011
Location: hagerstown
Posts: 628
called Texas speed and they recommend the monster level 4 its only a single disc and its only like 780$
__________________
12.4 in 1/4 at 117mph first time
custom 2tone paint fastlane stage 2 hydroformed carbon fiber cowl and cluster kooks headers and 3" xpipe with pypes axle back

fastlane2010 is offline   Reply With Quote
Old 03-11-2012, 09:00 AM   #16
tkrupinski
Hugger Orange
 
tkrupinski's Avatar
 
Drives: 2010 Hugger Orange 2SS/ RS YSI/4l80
Join Date: May 2010
Location: Marysville Ohio
Posts: 535
Quote:
Originally Posted by fastlane2010 View Post
called Texas speed and they recommend the monster level 4 its only a single disc and its only like 780$
The street slayer is a little rough on the wallet, but worth every penny after the first time you drive it in stop and go traffic.
tkrupinski is offline   Reply With Quote
Old 03-11-2012, 09:18 AM   #17
edog


 
edog's Avatar
 
Drives: 2010 2SS/RS IOM
Join Date: Oct 2008
Location: F'BURG VA
Posts: 3,576
Send a message via MSN to edog
You see...All these threads in the past about auto vs manual...Us auto folks don't have this issue!

Sorry for the random act of snobbery... Back to your regular scheduled thread post!
__________________
LS3 Conversion 113/225/238 COMP CAM, 3200 Stall, Doug Thorley Tri-Y LT/HF cat, Xpipe, Ported TB, 160 therm, Tranny cooler, Halltech CAI, Pedders sways, endlinks, 1" Eibach Drop Springs, 3.45 rear gears. Tuned by Doug @ ECS. 435HP/420TQ
edog is offline   Reply With Quote
Old 03-15-2012, 03:47 PM   #18
fastlane2010
 
fastlane2010's Avatar
 
Drives: 2010 camaro with fast lane stage 2
Join Date: Apr 2011
Location: hagerstown
Posts: 628
yeah but what any kind of power have to buy a torque convertor
__________________
12.4 in 1/4 at 117mph first time
custom 2tone paint fastlane stage 2 hydroformed carbon fiber cowl and cluster kooks headers and 3" xpipe with pypes axle back

fastlane2010 is offline   Reply With Quote
Old 03-18-2012, 10:36 PM   #19
USArmy
 
Drives: 6.2 Liter Supercharged, LS3
Join Date: Mar 2012
Location: Texas
Posts: 12
DON't do the MONSTER CLUTCH!!!

Quote:
Originally Posted by fastlane2010 View Post
just looked at your prices and they are way out of the price range that i am willing to pay how do they compare to the ram and the monster clutches
Fastlane,

Nice car! DON'T do the Monster clutch!!! I have it and is a PIECE OF JUNK. You will regret buy a Monster clutch. Check my thread about it.
__________________
6.2 Liter Supercharged, 6-speed manual, Hurst Short Throw Shifter, Airaid Cold Air Intake, 1 7/8 powder coated Kooks Headers, 3" MBRP full catback exhaust (T304 Stainless), BMR Differential Bushings, Spohn Performance Trailling Arms, BMR Fabrication Rear Cradle Bushings (Delrin), G-Force 1400HP Axles, Kenne Bell Boost-a-Pump, Nitto 555R Drag Radials, custom tune
USArmy is offline   Reply With Quote
Old 03-18-2012, 10:57 PM   #20
tadams72
When is enough ever...
 
tadams72's Avatar
 
Drives: 2006 Silverado 2500HD CC/SB LBZ
Join Date: Apr 2011
Location: Residence: Chula Vista, CA Home: Billings, MT
Posts: 744
Street Slayer is AWESOME! Worth every penny and if your worried about street manners, my wife likes driving this clutch better than the factory and I agree.
__________________
The Toy: 2011 Camaro 2SS/RS, LS3, Power by Vengeance Racing...
"I don't make things difficult. That's the way they get, all by themselves." Riggs



The Workhorse: 2006 Silverado CCSB, EFI Live, MBRP/Diamond Eye 4" turbo back, Edge Insight CTS
tadams72 is offline   Reply With Quote
Old 03-19-2012, 12:34 PM   #21
swiftkart
 
swiftkart's Avatar
 
Drives: 2010 SS/RS LS3 M6
Join Date: Apr 2011
Location: Kansas
Posts: 221
Mantic 9000 Twin disc from ECS, smooth as butter!
swiftkart is offline   Reply With Quote
Old 03-19-2012, 08:35 PM   #22
fastlane2010
 
fastlane2010's Avatar
 
Drives: 2010 camaro with fast lane stage 2
Join Date: Apr 2011
Location: hagerstown
Posts: 628
yeah but how much is the manic 9000 twin disc and does it come with a flywheel
__________________
12.4 in 1/4 at 117mph first time
custom 2tone paint fastlane stage 2 hydroformed carbon fiber cowl and cluster kooks headers and 3" xpipe with pypes axle back

fastlane2010 is offline   Reply With Quote
Old 03-20-2012, 08:47 AM   #23
Hendrix-Engineering
Account Suspended
 
Drives: First 9 inch-12 bolt IRS Camaro
Join Date: Jun 2009
Location: nc
Posts: 1,839
Thanks guys! We are very proud of the StreetSlayer it is priced higher than a single ,starting under $1600 but keep in mind this clutch can be rebuilt like new for much less when the time comes,and it will drive better than any single or twin out there.Instead of throwing your clutch away and buying another complete kit we can rebuild your StreetSlayer and it will be all new,with ever wear part being replaced at about half the price.If we can help you get a great clutch the first time give us a call.
Hendrix-Engineering is offline   Reply With Quote
Old 03-25-2012, 08:06 AM   #24
fastlane2010
 
fastlane2010's Avatar
 
Drives: 2010 camaro with fast lane stage 2
Join Date: Apr 2011
Location: hagerstown
Posts: 628
well got the clutch from texas speed and apparently it was wrong and i was misinformed from them because when i called steve at monster he said thelevel 4 isnt streetable so he is sending me the correct disc and correct throw bearing
__________________
12.4 in 1/4 at 117mph first time
custom 2tone paint fastlane stage 2 hydroformed carbon fiber cowl and cluster kooks headers and 3" xpipe with pypes axle back

fastlane2010 is offline   Reply With Quote
Old 03-25-2012, 09:51 AM   #25
Turbo99

 
Turbo99's Avatar
 
Drives: 08' F250 Diesel & 10' Camaro 2SS
Join Date: Nov 2010
Location: Gainesville,Fl
Posts: 1,314
why even come on here and ask if you don't plan on listening and doing what you want any way?

__________________
Contact me for questions: coopwfo@gmail.com I cant send/receive PMs.
08' F250 CCSB 6.4L Diesel White & Black, Blacked out, 580RWHP @ 55psi 13.21 @ 101mph
10' Camaro 2SS LS3 M6 White & Black, Blacked out, 684 RWHP & 633 FT.LBS @ 10psi 10.82@130mph
TVS2300 ,Hendrix Street Slayer Twin Carbon Clutch, Dana 60 3.73, DSS 1400HP Axles,JRe cam & LaMotta Performance tuned,LPE Fuel, AI Super Chiller,MT ET Streets
Turbo99 is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
DIY:TICK Performance Stainless Braided Clutch Line Squintz Palladoris Camaro DIY & HOW-TO instructions & discussions 21 07-15-2014 06:52 PM
Sticking clutch pedal issues - Tick Performance feels your pain! Joey@Tick V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6) 176 05-07-2014 02:37 AM
Katech LS9R Clutch Kit!! The end all be all clutch kit for the 5th GEN!!! ImportImage Transmission / Driveline 46 11-04-2011 04:44 PM
V6 w/ 12k miles clutch is out? bnorwood1 V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6) 17 08-12-2011 11:30 AM
What exactly burns the clutch on an m6? DarkneSS 5th Gen Camaro SS LS LT General Discussions 49 04-15-2011 11:55 AM


All times are GMT -5. The time now is 03:54 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.