Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Vararam
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Engine | Drivetrain | Powertrain Technical Discussions > Tuning / Diagnostics -- engine and transmission

Tuning / Diagnostics -- engine and transmission Tune and diagnostics for engines and auto transmission.

Reply
 
Thread Tools
Old 03-06-2012, 09:42 AM   #1
JANNETTYRACING
PRESIDENT CALIBRATOR JRE

 
JANNETTYRACING's Avatar
 
Drives: YELLOW 2013 ZL1 AUTO
Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 9,855
JRE SCT CUSTOM TUNE INSTRUCTIONS V4 3/6/12

JANNETTY RACING CUSTOM TUNE INSTRUCTIONS

When you Purchase an SCT X3 Hand Held Tuner from me you get ONE, 93 OR, ONE, 91 Octane Tune For Free 2010/11/12 Camaros Only, for your simple bolt on mods, CAI and Cat Backs, exclusions apply for Headers, cams, superchargers and nitrous and other vehicles.

Additional Tunes with minor changes are available AT THE TIME OF PURCHASE For 50.00 Each, i.e. Second tune for 91 Octane.

Your new SCT X3 will come to you Blank, You will need to connect the device to your car and Upload Stock tune file. Here is how, Sit in the car, Close the Door, Turn off all accessories and Unplug any devices from the Power Ports, i.e. cell phones, radar detectors, navigation etc. plug the device in to your OBDII port, select Program Vehicle, Using the left arrow scroll left to UPLOAD STOCK, it will prompt you to turn on the key, Turn the Key on, But do NOT Start, Wait for the Dinging to stop and hit select.

Your tuner came with a disc with Free Software called SCT Device Updater software, if not you can go to www.sctflash.com and down load for FREE, install this in your home or laptop computer Before you connect the device to your computer.

Then After you install and OPEN SCT Device updater software, you can connect your X3 to your computer, Drivers should install automatically, then Get Stock File, Click Browse, Find your Desktop and Click Save.

Go to your Desktop, there will be 3 files, Select the one with Your VinNumber.sul and email it to me tedj@jannettyracing.com along with your Full name, Address phone numbers, And all vehicle information Year, Make, Model, Engine, Trans, List of Performance Modifications and Preferred Octane 93 or 91.

PLEASE RE READ LAST STEP, I CANNOT TUNE YOUR CAR WITHOUT THIS INFORMATION, EVERYONE SEEMS TO FORGET OCTANE REQUIREMENT.

Then I will send you back a custom tune file for your mods.

When you receive a response, Save the file to your desktop, it will be, YOUR NAME JRE TUNE.cef

Again open SCT Device Updater, Then, connect your X3 tuner, select Load Custom Tune File, Browse to your tune file Select it, then select a position 1, then name it anything you like, i.e. JRE TUNE, click on program, you will see the progress bar at the bottom go green, then exit when finished.

Connect to your car, Select Program Vehicle, scroll left to Custom Tunes, Select JRE tune and follow the on screen prompts.


I have developed Dyno Proven tunes for all of the Product I sell, So Unless I instruct you to do so Datalogging will NOT be necessary.

If I instruct you to Datalog your car, The best way I found is to use a laptop on the seat, First, Start the Car, Then Open the LiveLink Software Then connect the X3 to your laptop, Then connect the X3 to the OBDII Port of the car, Then Hit the connect button, a list of PIDs will come up, you will have to scroll through them selecting the Items below.

Even thought they may not be named exactly as I listed them, I want you to select the following, but Try Not to select anything Not listed or doubles of any of the items listed.

You may have to test several PIDs to see which ones work best or work at all on your car.

Once you find a list that works well Save Configuration file for future use.

Engine RPM - RPM
MAP-Intkman abs prss
FUEL PRESSURE
ECT engine coolant temp – ecteng clt tmp
TPS throttle position or pedal position – acc pdl pos 1s
IAT intake air temp or Air intake temp – intk Airtmp
MAF Mass Air flow Hz – Maffre 125
TIMING spark cylinder 1 – ign Tim Adv4#1cyl
KNOCK RETARD – knk ret
Vehicle speed Kph–?
Long Term Fuel Trim bank 1 – ltf tri b1
Long Term Fuel Trim bank 2 – ltf tri b2

Pleas ONLY Select the PIDs Listed, Extra PIDs Slow Down Datalogging and give me useless information.

Names can vary from computer to computer but you get the Idea.

Once you have your PIDs configured and working, While NOT logging you can go to File/save LiveLink Configuration, for future Logging.

Go find a open road somewhere, 1/2 mile or so long would be great, from a stop drive the car 1/4 throttle up through the gears normally shifting at about 4500 RPM Paddle shift works best on Automatic trans cars.

Then repeat at about 1/2 throttle to 5500 RPM Speeding is not recommended or necessary 1st and 2nd gear are fine if you do not have the room.

Stop, and Save Datalog As to your desktop.


Email me the log files along with your Full name, Address phone numbers, And all vehicle information Year, Make, Model, Engine, Trans, and list of performance modifications, and any Comments you might think are helpful.

PLEASE RE READ THIS STEP, I CAN NOT REFINE YOUR TUNE WITHOUT THIS INFORMATION.

Please Do Not Assume I will know who you are By your Screen Name, or what kind of car you drive, or what your mods are, I deal with 50-100 people a Day so I must have all of your info right in front of me in ONE email so I can Properly Write your Tune.

Your Cooperation in reading, understanding and following these directions will make this a Very Pleasant Experience for both of us.

Thank you for Choosing JRE, Ted.

If you have other questions about SCT X3 or this program feel free to email me or call tedj@jannettyracing.com 203-753-7223
__________________
Technical information, Parts Sales, Professional Installation, and Custom Dyno Tuning.
Please vist our web sites for all your performance needs!
Ted Jannetty
Jannetty Racing Ent Inc.
2984 East Main St.
Waterbury Ct. 06705
203-753-7223
tedj@jannettyracing.com
www.jannettyracing.com
www.turboaddictionparts.com
Performance Parts
JANNETTYRACING is offline   Reply With Quote
Old 03-06-2012, 10:10 AM   #2
Mr_Draco


 
Mr_Draco's Avatar
 
Drives: 2SS/RS
Join Date: Sep 2008
Location: Western North Carolina
Posts: 6,356
So a tune for headers aren't included in the first tune?
Mr_Draco is offline   Reply With Quote
Old 03-06-2012, 11:31 AM   #3
JANNETTYRACING
PRESIDENT CALIBRATOR JRE

 
JANNETTYRACING's Avatar
 
Drives: YELLOW 2013 ZL1 AUTO
Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 9,855
Quote:
Originally Posted by Mr_Draco View Post
So a tune for headers aren't included in the first tune?
See my website for details.

Thank You.
__________________
Technical information, Parts Sales, Professional Installation, and Custom Dyno Tuning.
Please vist our web sites for all your performance needs!
Ted Jannetty
Jannetty Racing Ent Inc.
2984 East Main St.
Waterbury Ct. 06705
203-753-7223
tedj@jannettyracing.com
www.jannettyracing.com
www.turboaddictionparts.com
Performance Parts
JANNETTYRACING is offline   Reply With Quote
Old 03-14-2012, 08:51 PM   #4
JANNETTYRACING
PRESIDENT CALIBRATOR JRE

 
JANNETTYRACING's Avatar
 
Drives: YELLOW 2013 ZL1 AUTO
Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 9,855
Bump
__________________
Technical information, Parts Sales, Professional Installation, and Custom Dyno Tuning.
Please vist our web sites for all your performance needs!
Ted Jannetty
Jannetty Racing Ent Inc.
2984 East Main St.
Waterbury Ct. 06705
203-753-7223
tedj@jannettyracing.com
www.jannettyracing.com
www.turboaddictionparts.com
Performance Parts
JANNETTYRACING is offline   Reply With Quote
Old 03-21-2012, 06:55 PM   #5
LonghornLove
My Grille so Icey
 
LonghornLove's Avatar
 
Drives: Black 2SS/RS
Join Date: Sep 2011
Location: Pearland, Tx
Posts: 217
I have the sct tuner and I was going to do some datalogging for Ted. Are you suppose to download the software online or is it suppose to be installed when you install the device updater? It is nowhere to be found on my computer if that is the case.

NVM I watched Nicks video and found the answer.



Now do I need to send the custom tune with the data logging?

Last edited by LonghornLove; 03-21-2012 at 07:42 PM.
LonghornLove is offline   Reply With Quote
Old 03-21-2012, 08:52 PM   #6
JANNETTYRACING
PRESIDENT CALIBRATOR JRE

 
JANNETTYRACING's Avatar
 
Drives: YELLOW 2013 ZL1 AUTO
Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 9,855
Quote:
Originally Posted by LonghornLove View Post
I have the sct tuner and I was going to do some datalogging for Ted. Are you suppose to download the software online or is it suppose to be installed when you install the device updater? It is nowhere to be found on my computer if that is the case.

NVM I watched Nicks video and found the answer.



Now do I need to send the custom tune with the data logging?
No Sir,

Email me the log files along with your Full name, Address phone numbers, And all vehicle information Year, Make, Model, Engine, Trans, and list of performance modifications, and any Comments you might think are helpful.

PLEASE RE READ THIS STEP, I CAN NOT REFINE YOUR TUNE WITHOUT THIS INFORMATION.
__________________
Technical information, Parts Sales, Professional Installation, and Custom Dyno Tuning.
Please vist our web sites for all your performance needs!
Ted Jannetty
Jannetty Racing Ent Inc.
2984 East Main St.
Waterbury Ct. 06705
203-753-7223
tedj@jannettyracing.com
www.jannettyracing.com
www.turboaddictionparts.com
Performance Parts
JANNETTYRACING is offline   Reply With Quote
Old 03-28-2012, 04:18 PM   #7
apeko
 
apeko's Avatar
 
Drives: 2011 2-SS/RS SGM
Join Date: Sep 2010
Location: Ohio
Posts: 246
If I my car and try to shift through all 6 gears at 4500 rpm i would be going well over 100 mph. Not that i would not want to go that speed its hard to find a strech of road to do it.
Or am i doing something wrong?

Thanks
__________________
2011: 2SS/RS Camaro Synergy Metallic
apeko is offline   Reply With Quote
Old 03-28-2012, 04:25 PM   #8
JANNETTYRACING
PRESIDENT CALIBRATOR JRE

 
JANNETTYRACING's Avatar
 
Drives: YELLOW 2013 ZL1 AUTO
Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 9,855
Quote:
Originally Posted by apeko View Post
If I my car and try to shift through all 6 gears at 4500 rpm i would be going well over 100 mph. Not that i would not want to go that speed its hard to find a strech of road to do it.
Or am i doing something wrong?

Thanks
I only need 3 gears, Please don't do any thing Dangerous.

Quote:
Then repeat at about 1/2 throttle to 5500 RPM Speeding is not recommended or necessary 1st and 2nd gear are fine if you do not have the room.
__________________
Technical information, Parts Sales, Professional Installation, and Custom Dyno Tuning.
Please vist our web sites for all your performance needs!
Ted Jannetty
Jannetty Racing Ent Inc.
2984 East Main St.
Waterbury Ct. 06705
203-753-7223
tedj@jannettyracing.com
www.jannettyracing.com
www.turboaddictionparts.com
Performance Parts
JANNETTYRACING is offline   Reply With Quote
Old 03-28-2012, 04:32 PM   #9
apeko
 
apeko's Avatar
 
Drives: 2011 2-SS/RS SGM
Join Date: Sep 2010
Location: Ohio
Posts: 246
Quote:
Originally Posted by JANNETTYRACING View Post
I only need 3 gears, Please don't do any thing Dangerous.
no danger....lol i just needed that clarfied.
__________________
2011: 2SS/RS Camaro Synergy Metallic
apeko is offline   Reply With Quote
Old 03-30-2012, 06:47 PM   #10
Synyster

 
Synyster's Avatar
 
Drives: 2006 F150 Lariat
Join Date: May 2010
Location: Florida
Posts: 1,205
I'm seeing "Device Connection Failed" when I try to downloadload the stock file onto my computer, help?
Synyster is offline   Reply With Quote
Old 03-30-2012, 08:48 PM   #11
Synyster

 
Synyster's Avatar
 
Drives: 2006 F150 Lariat
Join Date: May 2010
Location: Florida
Posts: 1,205
Quote:
Originally Posted by Synyster View Post
I'm seeing "Device Connection Failed" when I try to downloadload the stock file onto my computer, help?
Never mind, got it
Synyster is offline   Reply With Quote
Old 04-08-2012, 01:26 PM   #12
dekan513
chevy pride
 
dekan513's Avatar
 
Drives: 2ss/rs
Join Date: Feb 2012
Location: pikeville ky
Posts: 2,147
a bump for jannetty racing
__________________

check out ky speeds fb page https://www.facebook.com/kyspeed
dekan513 is offline   Reply With Quote
Old 04-08-2012, 01:52 PM   #13
nebchevy
 
nebchevy's Avatar
 
Drives: 2011 2SS SGM Camaro
Join Date: Aug 2011
Location: Blair Nebraska
Posts: 597
+1 bump... awesome guy, ted is!!
nebchevy is offline   Reply With Quote
Old 04-09-2012, 09:23 AM   #14
JANNETTYRACING
PRESIDENT CALIBRATOR JRE

 
JANNETTYRACING's Avatar
 
Drives: YELLOW 2013 ZL1 AUTO
Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 9,855
Thanks Guys.
__________________
Technical information, Parts Sales, Professional Installation, and Custom Dyno Tuning.
Please vist our web sites for all your performance needs!
Ted Jannetty
Jannetty Racing Ent Inc.
2984 East Main St.
Waterbury Ct. 06705
203-753-7223
tedj@jannettyracing.com
www.jannettyracing.com
www.turboaddictionparts.com
Performance Parts
JANNETTYRACING is offline   Reply With Quote
Old 06-23-2012, 04:37 PM   #15
BowenSS1
 
BowenSS1's Avatar
 
Drives: She totaled it!
Join Date: Jun 2010
Location: houston tx
Posts: 221
I have the sct x3 tuner that came with my maggie i want to data log my runs at the track can i use this device without locking out hp tuners or changing my tune?
Also is there another way to data log a free or cheap software to use ?
My car is running good to me just seems to stop pulling before crossing the line!!
Car has ls3 conv. ,Maggie 8.6lbs ,3200 stall ,bolt ons ,D.r.
Best was 11.3@118 537rwhp 542rwtq

Last edited by BowenSS1; 06-23-2012 at 04:48 PM.
BowenSS1 is offline   Reply With Quote
Old 06-23-2012, 04:38 PM   #16
BowenSS1
 
BowenSS1's Avatar
 
Drives: She totaled it!
Join Date: Jun 2010
Location: houston tx
Posts: 221
I have dyno tune
BowenSS1 is offline   Reply With Quote
Old 06-23-2012, 05:32 PM   #17
TriGun
 
TriGun's Avatar
 
Drives: Camaro 2SS/RS Ice Silver
Join Date: Oct 2009
Location: Kuwait
Posts: 209
Yes you can datalog without any issue. Use sct livelink to log to your laptop. Go to sct website and it is free to download and use.

Sent from my X10i using Tapatalk 2
TriGun is offline   Reply With Quote
Old 06-26-2012, 04:37 PM   #18
JANNETTYRACING
PRESIDENT CALIBRATOR JRE

 
JANNETTYRACING's Avatar
 
Drives: YELLOW 2013 ZL1 AUTO
Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 9,855
Quote:
Originally Posted by BowenSS1 View Post
I have the sct x3 tuner that came with my maggie i want to data log my runs at the track can i use this device without locking out hp tuners or changing my tune?
Also is there another way to data log a free or cheap software to use ?
My car is running good to me just seems to stop pulling before crossing the line!!
Car has ls3 conv. ,Maggie 8.6lbs ,3200 stall ,bolt ons ,D.r.
Best was 11.3@118 537rwhp 542rwtq
The Logging software for your SCT device is FREE on SCTFlash.com.

They are working on updating the firmware to work with the newest version of Livelink on a daily basis, so if you have any trouble contact SCT directly and they will get you going.

The software is Awesome once you get it working on your car.

Ted.
__________________
Technical information, Parts Sales, Professional Installation, and Custom Dyno Tuning.
Please vist our web sites for all your performance needs!
Ted Jannetty
Jannetty Racing Ent Inc.
2984 East Main St.
Waterbury Ct. 06705
203-753-7223
tedj@jannettyracing.com
www.jannettyracing.com
www.turboaddictionparts.com
Performance Parts
JANNETTYRACING is offline   Reply With Quote
Old 06-26-2012, 11:35 PM   #19
KnightRiderSS
Voodoo Medicine Man
 
KnightRiderSS's Avatar
 
Drives: Black 2SS with RS package
Join Date: Jul 2010
Location: IL
Posts: 929
Has anyone else had problems getting all the PIDs to display with livelink? I hit Get/Refresh IDs a few times but hasn't seemed to pull up the PIDs I need...I only played with it for a few minutes today as I have not had too much time to mess around with it. I didn't know if there were any tricks to get the PIDs you need to show up?
__________________
KnightRiderSS is offline   Reply With Quote
Old 06-26-2012, 11:43 PM   #20
MARINE1991


 
MARINE1991's Avatar
 
Drives: COTW 8/29/11 2010 CAMARO
Join Date: Jul 2009
Location: HOMELESS
Posts: 9,975
Quote:
Originally Posted by JANNETTYRACING View Post
The Logging software for your SCT device is FREE on SCTFlash.com.

They are working on updating the firmware to work with the newest version of Livelink on a daily basis, so if you have any trouble contact SCT directly and they will get you going.

The software is Awesome once you get it working on your car.

Ted.
TED, the website is there main page do not see any software downloads on it. Also got the scanner and going to pick up my car this FRI, should be back Fri night, can I send you the file and can you do the tune this Sat??? Thanks
David
MARINE1991 is offline   Reply With Quote
Old 06-27-2012, 12:02 AM   #21
SS King
 
SS King's Avatar
 
Drives: a Panty Dropper
Join Date: Feb 2012
Location: Dehi
Posts: 481
Quote:
Originally Posted by MARINE1991 View Post
TED, the website is there main page do not see any software downloads on it. Also got the scanner and going to pick up my car this FRI, should be back Fri night, can I send you the file and can you do the tune this Sat??? Thanks
David
It's there it was hard for me to find also. Go to Tech support on there web page then look down to General motors programmers and click on that. Then click on the SCT x3 3400 and enter the serial number thats on the back of your tuner and go from there.


Here is the link straight to it http://www.sctflash.com/tsupdates.ph...0&GUD=1&GSER=1
__________________
SS King is offline   Reply With Quote
Old 06-27-2012, 12:36 AM   #22
MARINE1991


 
MARINE1991's Avatar
 
Drives: COTW 8/29/11 2010 CAMARO
Join Date: Jul 2009
Location: HOMELESS
Posts: 9,975
Quote:
Originally Posted by SS King View Post
It's there it was hard for me to find also. Go to Tech support on there web page then look down to General motors programmers and click on that. Then click on the SCT x3 3400 and enter the serial number thats on the back of your tuner and go from there.


Here is the link straight to it http://www.sctflash.com/tsupdates.ph...0&GUD=1&GSER=1
ok cool yea just found it, now I have another question, wanted to make sure before I flash the car to have the updated film ware but I click on update film ware then I clicked on browse like it told me to, and its asking me to find the LWU file and I can not find it... wanted to do this before I got the tune from TED and flash the car, as it told me to make sure the car was returned back to stock first. can not find that LWU file anyware..

thanks
David
MARINE1991 is offline   Reply With Quote
Old 06-27-2012, 08:40 AM   #23
JANNETTYRACING
PRESIDENT CALIBRATOR JRE

 
JANNETTYRACING's Avatar
 
Drives: YELLOW 2013 ZL1 AUTO
Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 9,855
Quote:
Originally Posted by MARINE1991 View Post
ok cool yea just found it, now I have another question, wanted to make sure before I flash the car to have the updated film ware but I click on update film ware then I clicked on browse like it told me to, and its asking me to find the LWU file and I can not find it... wanted to do this before I got the tune from TED and flash the car, as it told me to make sure the car was returned back to stock first. can not find that LWU file anyware..

thanks
David
Do not use the update firmware button use the Automatically check for update button.
__________________
Technical information, Parts Sales, Professional Installation, and Custom Dyno Tuning.
Please vist our web sites for all your performance needs!
Ted Jannetty
Jannetty Racing Ent Inc.
2984 East Main St.
Waterbury Ct. 06705
203-753-7223
tedj@jannettyracing.com
www.jannettyracing.com
www.turboaddictionparts.com
Performance Parts
JANNETTYRACING is offline   Reply With Quote
Old 06-30-2012, 05:06 PM   #24
Unreal


 
Drives: 2006 Z06
Join Date: Oct 2010
Location: Gilbert, AZ
Posts: 2,787
I was logging a car this morning for a JRE mail order tune and pulled the tune. It looked top notch. Fuel trims at idle were a bit lean, but other than that it was almost spot on. Timing maps looked great, everything looked good. Good to see some places that know what they are doing.
__________________
Nick
Corvette Z06 -1116rwhp
Unreal is offline   Reply With Quote
Old 06-30-2012, 07:12 PM   #25
JANNETTYRACING
PRESIDENT CALIBRATOR JRE

 
JANNETTYRACING's Avatar
 
Drives: YELLOW 2013 ZL1 AUTO
Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 9,855
Quote:
Originally Posted by Unreal View Post
I was logging a car this morning for a JRE mail order tune and pulled the tune. It looked top notch. Fuel trims at idle were a bit lean, but other than that it was almost spot on. Timing maps looked great, everything looked good. Good to see some places that know what they are doing.
Who's car were you logging
__________________
Technical information, Parts Sales, Professional Installation, and Custom Dyno Tuning.
Please vist our web sites for all your performance needs!
Ted Jannetty
Jannetty Racing Ent Inc.
2984 East Main St.
Waterbury Ct. 06705
203-753-7223
tedj@jannettyracing.com
www.jannettyracing.com
www.turboaddictionparts.com
Performance Parts
JANNETTYRACING is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Official 1/4 Mile (V8) 2010+ Camaro Fast List Merc Dragstrip and Launch Techniques Discussion 2816 12-23-2014 12:44 PM
Jannetty L99 A6 Tune First Impressions OBSSEST Tuning / Diagnostics -- engine and transmission 107 01-07-2013 09:10 AM
OBX LTs HF cats / Borla Atak VID...JRE tune 1sweet11SS Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons 25 01-13-2012 11:13 PM
LS3 goes 11`s Bonestock! GMRULZ Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons 28 12-08-2008 10:10 PM


All times are GMT -5. The time now is 01:38 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.