Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Jason 98 TA
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Engine | Drivetrain | Powertrain Technical Discussions > V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6)


Reply
 
Thread Tools
Old 04-03-2012, 04:41 PM   #35
Steve@SNL/Monster Clutch
Account Suspended
 
Drives: 2014 SS
Join Date: Jan 2011
Location: Haslet, TX
Posts: 745
To anyone else; If you find yourself having questions of any kind on Monster Clutches do not hessitate to contact me directly. Our shop number is 817-750-2000, my personal email is Steve@monsterclutches.com, I'm right next to one or another throughout the day and I will personally get back with you. PM'ing me will not nearly be as quick because, as you can see, I don't frequent these forums as often as I would like.

Our units, when installed and broken in properly, are designed to provide you with a single disc clutch that offers smooth engagement and the potential to take a tremendous amount of punishment. It's what makes us who we are and it's what we stand behind. If you are ever unsatisfied with my product I encourage you to let me know first. Most of the time these things are cleared up very easily and will get you back to enjoying your Monster.

Thanks to all here for the kind words, let me know if you all have any other questions.
Steve@SNL/Monster Clutch is offline   Reply With Quote
Old 04-04-2012, 01:53 PM   #36
AngelSpeedFreak
Most hated in NM....
 
AngelSpeedFreak's Avatar
 
Drives: Sold the 6POINT2, went to a 50THZ06
Join Date: Sep 2011
Location: New Mexico
Posts: 2,911
Quote:
Originally Posted by Steve@SNLPerformance View Post
To anyone else; If you find yourself having questions of any kind on Monster Clutches do not hessitate to contact me directly. Our shop number is 817-750-2000, my personal email is Steve@monsterclutches.com, I'm right next to one or another throughout the day and I will personally get back with you. PM'ing me will not nearly be as quick because, as you can see, I don't frequent these forums as often as I would like.

Our units, when installed and broken in properly, are designed to provide you with a single disc clutch that offers smooth engagement and the potential to take a tremendous amount of punishment. It's what makes us who we are and it's what we stand behind. If you are ever unsatisfied with my product I encourage you to let me know first. Most of the time these things are cleared up very easily and will get you back to enjoying your Monster.

Thanks to all here for the kind words, let me know if you all have any other questions.
Glad to see you standing behind your product and even more importantly trying to fix any problems that may arise.

I am looking into your stage 5 kit now. Might be ready to pull the trigger now that I see how you do business.
__________________
AngelSpeedFreak is offline   Reply With Quote
Old 04-07-2012, 07:38 PM   #37
The 2010 Sin
weaponsinc.com
 
The 2010 Sin's Avatar
 
Drives: 2014 Lifted 1500, 2013 2SS CRT
Join Date: Feb 2010
Location: Tulsa, Oklahoma
Posts: 2,864
Same exact issues, thought i had a bent axle or driveshaft on my stage 3. I dont drive the car anymore because of this clutch. Shudders so hard since day 1 it feels like the axles are bent from a stop. dumping the clutch with over 500 at the tires isnt acceptable for a daily driver nor safe and thats the only way I can get this to not shudder the whole car. It also feels like the disc is on its very last little bit.. engagement went from mid pedal to top of the pedal and no longer feels accurate.. like a disc that is wearing out. 3 master cyls and two slave cyls thinking this was the problem. spoken to the guys on the phone several times (chris i believe it was) and he assured me they have hundreds of stage three's in new Camaros and no issues that it has to be my install or build. Steve, if you can touch base with me about what I can do to remedy this or upgrade to a twin disc i would love to give you all a best shot. I have the HotRod Power tour coming up in June as well as Texas heat wave and I definitely want it remedied before then.


Quote:
Originally Posted by USArmy View Post
Forum friends,

Just a little of my experience with Monster clutches so that you DO NOT MAKE THE SAME MISTAKE!!!!
Although I was not experiencing any kind of issues with my car, I recently replaced my factory clutch because I wanted to maximize HP to the ground. I looked around and called Monster Clutches. They assured me that the Level 3 was my best choice for my HP and that my daily driven car would still keep the good manners when driven around in the city while perfoming like a beast at the track. I gave the clutch the proper "break-in" in accordance with Monster's break in instructions during the first 500 miles (not highway, but city stop and go miles). My car currently has 1100 miles on the Monster clutch and I could not be MORE disappointed...the clutch makes a horrible and embarrasing noise EVERY time that you take off sounding as if your throwout bearing was in need of replacement. The billet flywheel that came with the package appears NOT to have been balanced. This clutch combo creates a vibration at speeds over 65 that resemble a car with a bent driveshaft... I am just giving you a word of advice...DO NOT BUY MONSTER CLUTCHES!!!! After wasting the money, I am ready to throw this piece of junk away and install an ACT or McLeod combo. Any other GOOD suggestions?
__________________

Last edited by The 2010 Sin; 04-07-2012 at 07:58 PM.
The 2010 Sin is offline   Reply With Quote
Old 04-08-2012, 04:20 PM   #38
Heliwrench
 
Heliwrench's Avatar
 
Drives: 2010 Black 1SS
Join Date: Aug 2009
Location: Langley BC
Posts: 671
Nearing the 500 mile mark... Not sure I like it, time will tell.
__________________
2010 Black 1SS LS3 M6
Power: Kook's 1 7/8" Long Tubes and 3" Exhaust, Injen Full Length CAI, Jannetty Tune
Drivetrain: MGW Short Shifter, Street Slayer Twin Clutch, DSS 1 Piece Aluminum Driveshaft, DSS 1000HP Axles, BMR Pro and Delrin Diff Bushings
Suspension: BMR Trailing Arms and Bushings, FE6 Swaybar Conversion With Pedders 27mm Front and 32mm Rear ZL1 Swaybars and Links
Chassis: Hotchkis Chassis Max Brace, BMR Pro Cradle Bushings
Exterior:: Shine by Adam's.
...and plenty more

Last edited by Heliwrench; 04-23-2013 at 10:15 PM.
Heliwrench is offline   Reply With Quote
Old 04-08-2012, 05:03 PM   #39
HufferSS
I Wanna Go Faster!!
 
HufferSS's Avatar
 
Drives: 2011 2SS Synergy Green M6
Join Date: Apr 2011
Location: SC
Posts: 3,328
Quote:
Originally Posted by camaros and vettes View Post
Guys you need to remember this clutch is made to support 700hp, it will not be as smooth as stock. It is going to have a little shutter to it. I'm not an expert but I think any clutch designed to hold this power will be the same with out spending mega bucks. Just my 2cents. The harder I am with minus the smoother it is. Try higher revs on take off and faster off the clutch pedal.
Not true....my twin carbon RPS/StreetSlayer clutch was like butter..even launching a big fat 4k lb car at 4k rpms with 700 ft/lbs of torque and 730 hp at the rear wheel.

Butter smooth. Best clutch I ever had.
__________________
Built by Vengeance Racing
9.31@154.81 mph
Procharger F1-X
RPM Level 7 4L80e + Coan Converter
Hendrix 9" Rear Axle + 3.50 Gear
ARH 2" LTs+3.5" Exhaust
Fore Fuel System, Bogarts + Hoosier Slicks
Pfadt Drag Pack Suspension
My Build Thread | Best Pass To Date
HufferSS is offline   Reply With Quote
Old 04-12-2012, 01:58 PM   #40
camaros and vettes
Account Suspended
 
Drives: 2010 IBM Camaro 2008 Corvette
Join Date: Aug 2008
Location: Tiffin,Iowa
Posts: 560
how much did your clutch cost hufferss? i got my stage three for under 650 shipped
camaros and vettes is offline   Reply With Quote
Old 04-13-2012, 01:10 AM   #41
The 2010 Sin
weaponsinc.com
 
The 2010 Sin's Avatar
 
Drives: 2014 Lifted 1500, 2013 2SS CRT
Join Date: Feb 2010
Location: Tulsa, Oklahoma
Posts: 2,864
Out with the stage 3 in with the street slayer very soon! :-) The 2010 Sin is needing this upgrade pretty bad!
__________________
The 2010 Sin is offline   Reply With Quote
Old 04-13-2012, 02:24 AM   #42
calbert1999
Camaro SS Lover
 
calbert1999's Avatar
 
Drives: 2010 Camaro 2SS/RS Black IOM
Join Date: Jun 2010
Location: Toronto, Ontario (Canada)
Posts: 2,856
ACT all the way. I have the 1150 street / track setup.
calbert1999 is offline   Reply With Quote
Old 04-13-2012, 09:15 PM   #43
The 2010 Sin
weaponsinc.com
 
The 2010 Sin's Avatar
 
Drives: 2014 Lifted 1500, 2013 2SS CRT
Join Date: Feb 2010
Location: Tulsa, Oklahoma
Posts: 2,864
No response in over a week.
__________________
The 2010 Sin is offline   Reply With Quote
Old 04-14-2012, 06:39 PM   #44
xx_ED_xx

 
xx_ED_xx's Avatar
 
Drives: 04 Silverado
Join Date: Jun 2010
Location: Floriduh!
Posts: 1,114
I wouldnt buy another mcleod to save my life...Wait til you have issues with one of theres
xx_ED_xx is offline   Reply With Quote
Old 04-20-2012, 02:07 AM   #45
The 2010 Sin
weaponsinc.com
 
The 2010 Sin's Avatar
 
Drives: 2014 Lifted 1500, 2013 2SS CRT
Join Date: Feb 2010
Location: Tulsa, Oklahoma
Posts: 2,864
LOL.
__________________
The 2010 Sin is offline   Reply With Quote
Old 04-21-2012, 10:45 AM   #46
Heliwrench
 
Heliwrench's Avatar
 
Drives: 2010 Black 1SS
Join Date: Aug 2009
Location: Langley BC
Posts: 671
Update: More squeeling and chatter is getting worse...
__________________
2010 Black 1SS LS3 M6
Power: Kook's 1 7/8" Long Tubes and 3" Exhaust, Injen Full Length CAI, Jannetty Tune
Drivetrain: MGW Short Shifter, Street Slayer Twin Clutch, DSS 1 Piece Aluminum Driveshaft, DSS 1000HP Axles, BMR Pro and Delrin Diff Bushings
Suspension: BMR Trailing Arms and Bushings, FE6 Swaybar Conversion With Pedders 27mm Front and 32mm Rear ZL1 Swaybars and Links
Chassis: Hotchkis Chassis Max Brace, BMR Pro Cradle Bushings
Exterior:: Shine by Adam's.
...and plenty more

Last edited by Heliwrench; 04-23-2013 at 10:15 PM.
Heliwrench is offline   Reply With Quote
Old 04-21-2012, 11:19 AM   #47
DandD
 
DandD's Avatar
 
Drives: 2010 2SS and 2011 LS
Join Date: Aug 2011
Location: Western burbs of the Motor City
Posts: 630
It's breaking in nicely. I have very little chatter at all and that only happens at very low rpm starts, I'll be at the track tomorrow looking for mid 12s, with just bolt ons.
__________________
Around here we like baseball, hot dogs, apple pie, and Chevrolet
DandD is offline   Reply With Quote
Old 04-28-2012, 03:17 PM   #48
USArmy
 
Drives: 6.2 Liter Supercharged, LS3
Join Date: Mar 2012
Location: Texas
Posts: 12
[QUOTE=Steve@SNLPerformance;4750155]I'm a little concerned as this is not the norm for my clutches at all. I'm Steve, I own both SNL Performance and Monster Clutch Co.

Have you contacted us about your issues or did you get frustrated and immediately head to the forums? I can't help if I'm not informed. Give me a call at the shop - 817-750-2000 - and I'll go over all your frustrations and help you start enjoying your Monster.



Agreed!

It could be installation, it could be driver, or it could very well be that we're human and made a mistake. Either way this can be handled easily with a phone call.



Corrected for you, thanks for the kind words!



These clutches love abuse.





Thank you for the kind words!

Quote:
Originally Posted by BullF-16 View Post
I was promised by them that their new Monster Twin Disc was going to go in my car. Every time i called to make sure they had the clutch, i got a different excuse. I had an appt set up to have a GForce 9" rear end and driveshaft installed so i figured i would do the clutch at the same time. I did not want a single disc installed in my car. I had a feeling they were giving me the run around on the clutch and told them i was ordering a McLeod as a back up plan. He said good, and he would buy my McLeod off me on the day of the install.

Well guess what....on the day of the install the flywheels came back machined wrong....yea, right! Anyway, the McLeod is in my car and i love it. Oh, the Monster Twin disc is still nowhere to be found. I wish people would be straight and quit the BS![/QUOTE]

You're correct Jim, I did tell you I wanted to put our twin in your car and that we were waiting for the final touches on the final prototype. There were delays that were explained to you along the way and when it came down to the wire I didn't install the part in your car because the machine work wasn't correct. This isn't bullshit, this isn't a lie, this isn't nor was it made up, this is the truth. Why would I lie to you and install something in your car that wasn't correct?! I know you frequent the forums and I respect you as a customer, why would I put something sub-par in your car? I wouldn't, and that is why you don't have a Monster in your car and that is the sole purpose I had my tech install your McLeod. I do not install competitors clutches, however, I told you I would do something and I didn't deliver, so I installed your clutch like I said I would.

That same, now correctly machined, twin is in my personal car and is working flawlessly.

Thanks!



Thanks again.



Thanks again!





My answer would be, more than likely you're being too nice to the unit during break in. Don't be afraid to drive the car moderately. The last thing you want to do is to slip the unit too much, cause a glaze to build up on the unit, and later have to deal with a clutch that chatters slightly and squeals on occasion. Since you're at 300 miles my recommendation would be a track outing. That will clear up any inconsistencies left in the material and offer you a smooth functional unit.
Steve,

I called you guys a couple of times and EVERY time Chris told me that the problem was my driving habits which I found really funny as my son's Corvette has a McLeod and it works PERFECTLY fine as a DAILY driver. Just like "The Sin", I called your shop every time HOPING to find REAL customer service (either upgrade to a twin clutch or some other fix). Instead (sadly, but necessary to mention), I realize that you are more of a "lip service" than customer service. Bottom line is that we had to re-balance the flywheel and the vibration is gone. However, after 2,500 miles on your Monster clutch the chatter and the embarrasing noise are still there!! If you say that your Stage 3 is good for street and track, then why would you have to beat the crap out of it "to make it work properly?" I am so disappointed with your product that I have been driving my son's Z06 while my car remains parked. By the way, I have not heard of any noises or experienced any chatter while driving the Corvette. I am contemplating a Hendrix-Performance, McLeod or ACT for my Camaro. I am just very frustrated that I called you to somehow remedy this problem and all I got was "good lip service", but no decisive solution. I threw my money away by trying your product and like others in this forum, I am telling the story based on my own personal experience.
__________________
6.2 Liter Supercharged, 6-speed manual, Hurst Short Throw Shifter, Airaid Cold Air Intake, 1 7/8 powder coated Kooks Headers, 3" MBRP full catback exhaust (T304 Stainless), BMR Differential Bushings, Spohn Performance Trailling Arms, BMR Fabrication Rear Cradle Bushings (Delrin), G-Force 1400HP Axles, Kenne Bell Boost-a-Pump, Nitto 555R Drag Radials, custom tune
USArmy is offline   Reply With Quote
Old 04-28-2012, 03:18 PM   #49
USArmy
 
Drives: 6.2 Liter Supercharged, LS3
Join Date: Mar 2012
Location: Texas
Posts: 12
Customer Service or Lip Service????

Quote:
Originally Posted by Steve@SNLPerformance View Post
To anyone else; If you find yourself having questions of any kind on Monster Clutches do not hessitate to contact me directly. Our shop number is 817-750-2000, my personal email is Steve@monsterclutches.com, I'm right next to one or another throughout the day and I will personally get back with you. PM'ing me will not nearly be as quick because, as you can see, I don't frequent these forums as often as I would like.

Our units, when installed and broken in properly, are designed to provide you with a single disc clutch that offers smooth engagement and the potential to take a tremendous amount of punishment. It's what makes us who we are and it's what we stand behind. If you are ever unsatisfied with my product I encourage you to let me know first. Most of the time these things are cleared up very easily and will get you back to enjoying your Monster.

Thanks to all here for the kind words, let me know if you all have any other questions.
Steve,

I called you guys a couple of times and EVERY time Chris told me that the problem was my driving habits which I found really funny as my son's Corvette has a McLeod and it works PERFECTLY fine as a DAILY driver. Just like "The Sin", I called your shop every time HOPING to find REAL customer service (either upgrade to a twin clutch or some other fix). Instead (sadly, but necessary to mention), I realize that you are more of a "lip service" than customer service. Bottom line is that we had to re-balance the flywheel and the vibration is gone. However, after 2,500 miles on your Monster clutch the chatter and the embarrasing noise are still there!! If you say that your Stage 3 is good for street and track, then why would you have to beat the crap out of it "to make it work properly?" I am so disappointed with your product that I have been driving my son's Z06 while my car remains parked. By the way, I have not heard of any noises or experienced any chatter while driving the Corvette. I am contemplating a Hendrix-Performance, McLeod or ACT for my Camaro. I am just very frustrated that I called you to somehow remedy this problem and all I got was "good lip service", but no decisive solution. I threw my money away by trying your product and like others in this forum, I am telling the story based on my own personal experience.
__________________
6.2 Liter Supercharged, 6-speed manual, Hurst Short Throw Shifter, Airaid Cold Air Intake, 1 7/8 powder coated Kooks Headers, 3" MBRP full catback exhaust (T304 Stainless), BMR Differential Bushings, Spohn Performance Trailling Arms, BMR Fabrication Rear Cradle Bushings (Delrin), G-Force 1400HP Axles, Kenne Bell Boost-a-Pump, Nitto 555R Drag Radials, custom tune
USArmy is offline   Reply With Quote
Old 04-28-2012, 03:25 PM   #50
USArmy
 
Drives: 6.2 Liter Supercharged, LS3
Join Date: Mar 2012
Location: Texas
Posts: 12
Quote:
Originally Posted by The 2010 Sin View Post
No response in over a week.
Sin,

I got the same answer...
Chris said that I don't have "good" driving habits. I guess because I don't dump the clutch at 6,000 RPMs every time that I am taking off! I wanted to see if they would offer some kind of a fix, but...I am still waiting. Maybe we just don't know how to drive. Surprisingly, the problems that we experience don't happen with other brand clutches
__________________
6.2 Liter Supercharged, 6-speed manual, Hurst Short Throw Shifter, Airaid Cold Air Intake, 1 7/8 powder coated Kooks Headers, 3" MBRP full catback exhaust (T304 Stainless), BMR Differential Bushings, Spohn Performance Trailling Arms, BMR Fabrication Rear Cradle Bushings (Delrin), G-Force 1400HP Axles, Kenne Bell Boost-a-Pump, Nitto 555R Drag Radials, custom tune
USArmy is offline   Reply With Quote
Old 04-29-2012, 02:03 AM   #51
The 2010 Sin
weaponsinc.com
 
The 2010 Sin's Avatar
 
Drives: 2014 Lifted 1500, 2013 2SS CRT
Join Date: Feb 2010
Location: Tulsa, Oklahoma
Posts: 2,864
Yes, Isnt that funny.. they're not able to complete the proper customer service. Thats enough for me to not recommend the product to others.
__________________
The 2010 Sin is offline   Reply With Quote
 
Reply

Tags
clutches, level 3, mistake, monster, racing

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Monster Clutch ztsmith86 V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6) 20 03-07-2012 08:36 PM
Street Slayer Brought to you by Hendrix Engineering Hendrix-Engineering V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6) 2 12-08-2011 05:32 PM
Street Slayer brought to you by Hendrix Engineering Hendrix-Engineering Transmission / Driveline 2 12-08-2011 03:55 PM
clutch pedal repeatedly stuck, minimal load cab2g Camaro Issues / Problems | Warranty Discussions | TSB and Recalls 2 04-26-2011 10:39 AM
Anyone using a Monster clutch? HRC V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6) 2 11-18-2010 08:39 PM


All times are GMT -5. The time now is 08:01 PM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2016, vBulletin Solutions, Inc.