Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Grabiak Performance Center
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Engine | Drivetrain | Powertrain Technical Discussions > Forced Induction - V6

Forced Induction - V6 V6 Supercharger, turbo, nitrous discussions

Reply
 
Thread Tools
Old 03-10-2012, 05:59 PM   #1
Smith7145
 
Drives: 2012 lt1 camaro
Join Date: Mar 2012
Location: Lebanon
Posts: 8
Nitrous question

I am looking to add nitrous to my 2012 Camaro. What is the best system out there for a stock v6? and i want to be safe just enough for a 55 to 100 hp gain...any information will be great.
Smith7145 is offline   Reply With Quote
Old 03-10-2012, 07:59 PM   #2
Ice Demon

 
Ice Demon's Avatar
 
Drives: 2010 Camaro SS
Join Date: Oct 2011
Location: Earth
Posts: 1,044
Nitrous Express is the best in my opion. Zex is a good kit but if I was going to put a nitrous kit on my camaro it would be a nitrous express kit.
__________________
My car is stock.....ish
Ice Demon is offline   Reply With Quote
Old 03-11-2012, 07:43 AM   #3
gml1998
 
gml1998's Avatar
 
Drives: 2010 Synergy Green Camaro
Join Date: Jun 2010
Location: Minooka Illinois
Posts: 586
http://www.camaro5.com/forums/showth...ghlight=nytrex
gml1998 is offline   Reply With Quote
Old 03-11-2012, 07:54 AM   #4
etmx183

 
etmx183's Avatar
 
Drives: 2012 Camaro 2LT RS, 04 Turbo Busa
Join Date: Mar 2012
Location: Baltimore, Maryland
Posts: 1,004
I have the Ny-trex triple threat system on my 2012 V-6. Easy install, great wiring!!! and no need to buy anything else to do the install. Took me about an hour from start to finish. I have some photos in my albums on this install. If you go with this system PM me there are few little items/directions that are not clear in the supplement. If you have installed systems before you will understand when installing what should have been added to clarify about nozzle location and direction. If this is your first time installing a system P/M me for some insite. The folks at DEI are very friendly to talk to also.

Enjoy what ever system you choose.
Rick
__________________
CAI intake, RX catch can, NYTREX Nitrous,RX Ported Throttle body, APEX air scoop & washer relocation kit,, BMR diff bushings, cradle bushings, driveshaft loop and tunnel brace, trailing arms, toe arms, Hurst Roll control, Flex-a-lite transmission cooler, SOLO HFCs, M/T 20" D/Rs, FTI 3400 stall converter, JacFab ported intake manifold and upper intake isolator (12/13) Solo cat back Mach X system (2/14), SS diff 3.91 gears (11/2013) Weld RT-S 17x10 & 17x5 (4/2014)
TUNING BY: HP Tuners /MATT@FSP
( 1.63 60' / 12.238@107.62 10/25/2013 )
Refusing to grow older, I just go faster.
etmx183 is offline   Reply With Quote
Old 03-11-2012, 08:25 AM   #5
h2oplay
Winners find a way
 
h2oplay's Avatar
 
Drives: 2010 2LT/RS M6
Join Date: Jun 2010
Location: NE Ohio
Posts: 1,138
nytrex FTW..... no drilling into your CAI, the plate system is a breeze to install and the DEI guys are top notch
h2oplay is offline   Reply With Quote
Old 03-11-2012, 07:37 PM   #6
Smith7145
 
Drives: 2012 lt1 camaro
Join Date: Mar 2012
Location: Lebanon
Posts: 8
whats the website for the nytrex thriple threat system and cost also whats the defference between the thriple threat system and the FTW...are they safe with out any upgrades
Smith7145 is offline   Reply With Quote
Old 03-11-2012, 08:02 PM   #7
etmx183

 
etmx183's Avatar
 
Drives: 2012 Camaro 2LT RS, 04 Turbo Busa
Join Date: Mar 2012
Location: Baltimore, Maryland
Posts: 1,004
Quote:
Originally Posted by Smith7145 View Post
whats the website for the nytrex thriple threat system and cost also whats the defference between the thriple threat system and the FTW...are they safe with out any upgrades
" FTW " = For The Win a way of saying that is the winner.
My 2012 is all stock except GMPP ( General Motors Performance Products ) mufflers installed.
__________________
CAI intake, RX catch can, NYTREX Nitrous,RX Ported Throttle body, APEX air scoop & washer relocation kit,, BMR diff bushings, cradle bushings, driveshaft loop and tunnel brace, trailing arms, toe arms, Hurst Roll control, Flex-a-lite transmission cooler, SOLO HFCs, M/T 20" D/Rs, FTI 3400 stall converter, JacFab ported intake manifold and upper intake isolator (12/13) Solo cat back Mach X system (2/14), SS diff 3.91 gears (11/2013) Weld RT-S 17x10 & 17x5 (4/2014)
TUNING BY: HP Tuners /MATT@FSP
( 1.63 60' / 12.238@107.62 10/25/2013 )
Refusing to grow older, I just go faster.
etmx183 is offline   Reply With Quote
Old 03-11-2012, 08:30 PM   #8
Smith7145
 
Drives: 2012 lt1 camaro
Join Date: Mar 2012
Location: Lebanon
Posts: 8
what is the website for that system
Smith7145 is offline   Reply With Quote
Old 03-12-2012, 06:46 AM   #9
gml1998
 
gml1998's Avatar
 
Drives: 2010 Synergy Green Camaro
Join Date: Jun 2010
Location: Minooka Illinois
Posts: 586
Quote:
Originally Posted by Smith7145 View Post
what is the website for that system
http://www.xplosiveperformance.com/T...em_p_2879.html
gml1998 is offline   Reply With Quote
Old 03-19-2012, 12:51 PM   #10
FDNY-L107
 
FDNY-L107's Avatar
 
Drives: 2011 Camaro LS V6
Join Date: Feb 2011
Location: Maryland
Posts: 111
Stand-by......Nitro Dave over at the Nitrous Outlet will be releasing their complete kit specifically designed for the V6 Camaro's. This kit will offer various power levels. I will be working with Dave and will post a complete detailed install of the kit (with pictures step by step). I'll be initially setting it at 75hp. The installed and post should be done within the next 3 weeks. This kit will be worth waiting for!!
__________________
Black 2011 Camaro LS M6
- Nitro Dave's NOS Plate System - 100 shot
- Hochkis Front & Rear Comp Sway Bars & End Links, SS Struts & Shocks, Eibach Springs
- BMR Sub-Frame & Tunnel Brace, BMR Rear Toe Rods, Rear Control Arms, GM Strut Bar Brace
- BBK LT Headers w/Kook's 2.5" Cat-Back Exhaust
- Forgeline DE3S Wheels NT05 Tires
- RS 4-gauge pod/RS leather console lid, Leather Steering Wheel, MTI Shifter
- Cold Air Induction CAI w/VMAX Ported TB & Ported+Powdercoated Intake Manifold, SLP UD Pulley, RX Catch can & Breather, RX Black-Iceolator, Port-matched heads
- Braille 17 Battery
- Trifecta Tune
FDNY-L107 is offline   Reply With Quote
Old 03-19-2012, 01:43 PM   #11
RSKUSTOMZ
RSKUSTOMZ
 
RSKUSTOMZ's Avatar
 
Drives: 2010 Camaro T-top RS
Join Date: Jan 2010
Location: Winston Salem, NC
Posts: 363
I'm using the ZEX kit with no problems running 100 shot
RSKUSTOMZ is offline   Reply With Quote
Old 03-29-2012, 06:25 PM   #12
bambam72_1999
 
Drives: 2011 Camaro 2LT/RS Convertible
Join Date: Oct 2011
Location: St Louis
Posts: 42
How hard is nitrous on 3.6l

I have never run nitrous before and want to know how hard is it on these 3.6L engines? I have a 2011 Camaro V6 vert as a weekend cruiser, with a few mods, vararam intake, ported tb, vmax ice-olator, Trifecta tune, BBK ss lt headers and Corsa ss cat back exhaust. So I really dont have 7K to drop on a supercharger for only about 100 rwhp, if I could get that from nitrous for about 1K. The questions is, how hard is nitrous going to be on the engine? I will play with it somewhat, but mainly the car is a weekend cruiser and spends most of her time sitting. Have had her 6 months and just turned 2,000 miles. So a little help here would be greatly appreciated.
Also, does anyone know if the triple threat system comes with all the safety switches, ie window switch, etc? Also, what is the recommended best nitrous system to buy and biggest shot recommended to be used?
bambam72_1999 is offline   Reply With Quote
Old 03-29-2012, 10:05 PM   #13
TexasCamaro5
Bayou City Muscle Cars
 
Drives: 2010 Camaro 2LT/RS
Join Date: May 2010
Location: Houston,Tx
Posts: 90
As far as the Nytrex Triple Threat System, the best thing to do is contact the company directly through email or phone if you're interested in that system. There's also a Zex nitrous kit that some people on here have. If you really know what you're doing with nitrous then you can go with NX Express or Cold Fusion Nitrous for either a plate kit or direct porting. I had a performance shop that's experienced with nitrous do the work on my car.

No matter what, the system should only be used at the drag strip.
TexasCamaro5 is offline   Reply With Quote
Old 04-18-2012, 07:49 AM   #14
Xplosive Performance
Account Suspended
 
Drives: 240sx SR20DET,240sx w/LS6, 09-ZO6
Join Date: Feb 2010
Location: Longwood, Florida
Posts: 2,896
Send a message via AIM to Xplosive Performance
The NyTrex name has been around for many years now owned be Design Engineering DEI out of ohio. We have been a dealer for Nytrex and DEI for many many years they sell and manufacture only top quality products made here in the US. We work with DEI on the intial design and build of this the Gen 5 V6 nitrous system so we are very very in touch with it. This sytem is easy to install about 2 hours if you haven't done one before. The triple threat system is very simple and a great system to install all 3 selenoids are mounted on one plate and prewired so it is plug and go. Bring all your feed lines into the correct selenoid and away you go. So you have fuel, nitrous, purge all in one location ready and easy to install on this kit its already mounted to the bracket bolt it to the exhaust bracket and run your lines very simple. The wet system plate bolts between the throttle body and the intake and you run your fuel and nitrous line and thats installed.

When the 2010 Camaro V6 was announced, automotive enthusiasts were excited and encouraged. Its styling and horsepower rating (over 300hp) were necessary to give the Camaro V6 credible placement in a demanding market. The engineers at GM were successful and their effort is much appreciated!
Some time has passed since the new Camaro was introduced, and enthusiasts want more out of this modern pony car. DEI has the solution! With the Ny-Trex Triple-Threat wet nitrous oxide system, up to an additional 100hp is just a spray away. This system is specifically designed for the new Camaro V6. With exception to mounting the bottle, drilling, cutting, and wire splicing is eliminated. Intentionally designed around the Ny-Trex Triple-Threat valve, this system includes a v-spray purge (not found in competitors kits). All hardware is custom fabricated for this application and wiring is tailored for a clean and easy installation.
Includes Triple-Threat Valve, Purge, Fuel Safety Switch, 10 lb Bottle, Pressure Geuge, Spray-Plate, Single Nozzle, Mounting Hardware, 35, 50, 75, and 100 hp jetting.
Special Features:
  • Easily concealed system
  • Custom brackets, no fabrication
  • Application-specific spray-plate
  • No cutting or drilling*
  • Plug and Play wiring, no cutting/splicing
  • Triple-Threat Valve w/LIFETIME WARRANTY
*Drilling is necessary for bottle brackets only.

Any questions please feel free to call us 888.493.8041 this is a great system and performance fantasic.
Xplosive Performance is offline   Reply With Quote
Old 04-18-2012, 02:15 PM   #15
Neal@NitrousOutlet.com
 
Drives: The Blue Vert
Join Date: Mar 2012
Location: Waco, TX
Posts: 123
Stay tuned. I am about to go take some pictures of something that will be right up your guys alley......
Neal@NitrousOutlet.com is offline   Reply With Quote
Old 04-18-2012, 03:49 PM   #16
Neal@NitrousOutlet.com
 
Drives: The Blue Vert
Join Date: Mar 2012
Location: Waco, TX
Posts: 123
Check it out....

http://www.camaro5.com/forums/showth...22#post4826622
Neal@NitrousOutlet.com is offline   Reply With Quote
Old 07-26-2012, 07:37 AM   #17
BaylorCamaro
AutoX is for fast DRIVERS
 
BaylorCamaro's Avatar
 
Drives: 2013 ZL1
Join Date: Sep 2009
Location: Kemah, TX
Posts: 4,687
Quote:
Originally Posted by Neal@NitrousOutlet.com View Post
Stay tuned. I am about to go take some pictures of something that will be right up your guys alley......
Fin still working at NitrousOutlet?
__________________
557 rwhp / 525 rwtq (PFADT Headers & Cats/ Roto-Fab Intake / Ported LSA TB)
Automotive YouTube Channel / My First ZL1 Autocross / Build Thread
BaylorCamaro is offline   Reply With Quote
Old 08-17-2012, 11:12 AM   #18
Skizzy
 
Skizzy's Avatar
 
Drives: 2001 WS.6 Trans-Am
Join Date: Dec 2009
Location: Waco, TX
Posts: 58
Send a message via AIM to Skizzy
Quote:
Originally Posted by BaylorCamaro View Post
Fin still working at NitrousOutlet?
No sir...
__________________

Car info can be located @ www.fquick.com/Skizzy
Skizzy is offline   Reply With Quote
Old 08-17-2012, 11:40 AM   #19
BaylorCamaro
AutoX is for fast DRIVERS
 
BaylorCamaro's Avatar
 
Drives: 2013 ZL1
Join Date: Sep 2009
Location: Kemah, TX
Posts: 4,687
Quote:
Originally Posted by Skizzy View Post
No sir...
aww bummer, I meet him back when I was at Baylor.
__________________
557 rwhp / 525 rwtq (PFADT Headers & Cats/ Roto-Fab Intake / Ported LSA TB)
Automotive YouTube Channel / My First ZL1 Autocross / Build Thread
BaylorCamaro is offline   Reply With Quote
Old 08-17-2012, 02:54 PM   #20
Skizzy
 
Skizzy's Avatar
 
Drives: 2001 WS.6 Trans-Am
Join Date: Dec 2009
Location: Waco, TX
Posts: 58
Send a message via AIM to Skizzy
He's a good guy and the part was friendly. He's going back to school in austin i believe so it would to far a drive for him to work here on the regular.
__________________

Car info can be located @ www.fquick.com/Skizzy
Skizzy is offline   Reply With Quote
Old 08-21-2012, 07:17 PM   #21
usa1camaro1969
Back on the dino-juice
 
usa1camaro1969's Avatar
 
Drives: '10 LS + a few more
Join Date: May 2010
Location: Texas
Posts: 1,640
I'm upgrading my NX kit with a plate conversion from NitrousOutlet.com. NitroDave and Neal put some impressive kits out, and I've seen some of their cars run at our local track.
Whewww.
This is their plate thread:
http://www.camaro5.com/forums/showthread.php?t=217440
__________________
I wake up in the morning and I piss excellence.
-Ricky Bobby
America is all about speed. Hot, nasty, badass speed. -Eleanor Roosevelt, 1936

Last edited by usa1camaro1969; 08-22-2012 at 05:22 PM.
usa1camaro1969 is offline   Reply With Quote
Old 08-22-2012, 04:30 AM   #22
mydreamcar
My Dream Car
 
mydreamcar's Avatar
 
Drives: 2011 SIM LS3 1SS
Join Date: Jul 2009
Location: staten island
Posts: 1,226
__________________
CAI intake/ADM Scoop/Stainless Power Headers/Doug Thorley Catback Exhaust/Tuned by ECS
mydreamcar is offline   Reply With Quote
Old 08-23-2012, 12:26 PM   #23
V6owner
Cedar Creek Woodshop
 
V6owner's Avatar
 
Drives: One Badass 1LE
Join Date: Mar 2011
Location: Rosenberg, TX
Posts: 2,187
Lol you sure post that site alot
__________________
2014 Black 2SS/RS 1LE
V6owner is offline   Reply With Quote
Old 08-23-2012, 12:27 PM   #24
BaylorCamaro
AutoX is for fast DRIVERS
 
BaylorCamaro's Avatar
 
Drives: 2013 ZL1
Join Date: Sep 2009
Location: Kemah, TX
Posts: 4,687
Quote:
Originally Posted by V6owner View Post
Lol you sure post that site alot
Was going to say the same thing..
__________________
557 rwhp / 525 rwtq (PFADT Headers & Cats/ Roto-Fab Intake / Ported LSA TB)
Automotive YouTube Channel / My First ZL1 Autocross / Build Thread
BaylorCamaro is offline   Reply With Quote
Old 08-23-2012, 07:38 PM   #25
usa1camaro1969
Back on the dino-juice
 
usa1camaro1969's Avatar
 
Drives: '10 LS + a few more
Join Date: May 2010
Location: Texas
Posts: 1,640
My plate conversion was delivered to the house today and I'll be able to get it this weekend.
Thanks Neal and Dave, I'll let you know how it goes.
__________________
I wake up in the morning and I piss excellence.
-Ricky Bobby
America is all about speed. Hot, nasty, badass speed. -Eleanor Roosevelt, 1936
usa1camaro1969 is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Nitrous Solenoid Maintenance Graham@N Mechanical Maintenance: Break-in / Oil & Fluids / Servicing 1 04-27-2011 09:27 AM
nitrous Outlet 90mm plate kit with accs.. Single_Turbo_G8 V8 - Engine, Exhaust, Bolt-Ons, Tuning Equipment 4 10-19-2010 06:10 PM
Thank you Nitrous Express!!!!! Andrew@SPItuning Forced Induction - V8 7 10-01-2010 09:35 AM
Nitrous Outlet 2010 Camaro Nitrous System and Accessories! Nitro Dave Forced Induction 9 11-26-2009 11:49 PM
****Nitrous Outlets new Camaro Nitrous kit Available at ETMC!!!!*** east TX Muscle cars Forced Induction 0 10-29-2009 02:49 PM


All times are GMT -5. The time now is 10:27 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.