Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
autoguy
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Engine | Drivetrain | Powertrain Technical Discussions > Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons

Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons Bolt-Ons | Intakes | Exhaust

Reply
 
Thread Tools
Old 03-14-2012, 11:53 PM   #1
VR Baron
SoCal Camaro5 Race Team
 
VR Baron's Avatar
 
Drives: 2012 VR 2SS RS M6
Join Date: Mar 2010
Location: SO CAL
Posts: 12,863
HALLTECH CAI INSTALLED

Installed the Halltech cai on Wednesday. Only took an hour.No instructions but easy and straight forward, also had help from a thread here. One thing I did was instead of cutting the plastic pcv line to the intake tube so it would fit into the rubber hose with the kit, I cut a larger dia hose pc that the plastic line with the fitting attached could slip into and also the rubber line from the kit would also. Worked perfectly and oem line intact.
Initial 15 miles car felt better, easier off the line and accelerated more smoothly, will see after the ecu relearns the new setup.Not much sound, a bit more rumble but exhaust hides most of it.Later will paint the tube gloss black and the box red.
More pics in my journal thread also.
Attached Images
 
__________________
#1 car 2010 Black 2LTRS 1/28/10-10/15/11, 17900 miles
#2 car 2012 Red 2SSRS 10/15/11-
Mods: Outlaw Axelback & J Pipes /Magnaflow resonated X Pipe/Heritage&Stillen Grill/Halltech CAI/Apex Scoop,Washer Bottle/OEM Strut Tower Brace/VMax T/B/ G.M. Blade Spoiler/SLP Splitter/TSW Nurburgring wheels & Michelin Super Sport tires/JBA Shorty Headers,HiFlow cats & tune/Remote Clutch resovoir/ Pedders Supercar coilovers and Pedders 27mm/32mm ZL1 Spec sway bars / Whiteline craddle Inserts & Upper rear arm bushes/ 416/414 RW HP/TQ
VR Baron is online now   Reply With Quote
Old 03-15-2012, 12:04 AM   #2
SM0KE
IN THE CIRCLE
 
SM0KE's Avatar
 
Drives: 2010 IOM 2SS/RS
Join Date: Oct 2010
Location: IN THE CIRCLE
Posts: 1,922
Congrats! I also have Halltech
I dont want to highjack your thread but here is mine painted.



__________________
Increasing Circle Size is not important.
Worthiness will knock at the door on it's own accord


SM0KE is offline   Reply With Quote
Old 03-15-2012, 12:07 AM   #3
VR Baron
SoCal Camaro5 Race Team
 
VR Baron's Avatar
 
Drives: 2012 VR 2SS RS M6
Join Date: Mar 2010
Location: SO CAL
Posts: 12,863
Quote:
Originally Posted by SM0KE View Post
Congrats! I also have Halltech
I dont want to highjack your thread but here is mine painted.



Nice!
__________________
#1 car 2010 Black 2LTRS 1/28/10-10/15/11, 17900 miles
#2 car 2012 Red 2SSRS 10/15/11-
Mods: Outlaw Axelback & J Pipes /Magnaflow resonated X Pipe/Heritage&Stillen Grill/Halltech CAI/Apex Scoop,Washer Bottle/OEM Strut Tower Brace/VMax T/B/ G.M. Blade Spoiler/SLP Splitter/TSW Nurburgring wheels & Michelin Super Sport tires/JBA Shorty Headers,HiFlow cats & tune/Remote Clutch resovoir/ Pedders Supercar coilovers and Pedders 27mm/32mm ZL1 Spec sway bars / Whiteline craddle Inserts & Upper rear arm bushes/ 416/414 RW HP/TQ
VR Baron is online now   Reply With Quote
Old 03-15-2012, 01:07 AM   #4
axis
Search Ninja
 
axis's Avatar
 
Drives: 2010 Black 2SS/RS A6
Join Date: Oct 2009
Location: Central Ark
Posts: 7,185
Nice flames.

I've had mine for 2yrs now and love it. Jim is a great guy to work with.
__________________
2010 Black 2SS/RS A6
Halltech CF 102 fed
GPI modded intake manifold
Bo (knows) White ported TB
Kooks LT's/ Dynomax VT
Pfadted (springs/sways)
Dyno tuned by Rhino and GPI

I once parallel parked a train.
axis is offline   Reply With Quote
Old 03-15-2012, 11:41 AM   #5
Iwantone2
Voice Of The Voiceless
 
Iwantone2's Avatar
 
Drives: CGM 1SS RS
Join Date: Feb 2009
Location: OC Cali
Posts: 9,731
Congrats Baron and it looks great!
__________________
Iwantone2 is offline   Reply With Quote
Old 03-15-2012, 02:37 PM   #6
VR Baron
SoCal Camaro5 Race Team
 
VR Baron's Avatar
 
Drives: 2012 VR 2SS RS M6
Join Date: Mar 2010
Location: SO CAL
Posts: 12,863
Quote:
Originally Posted by Iwantone2 View Post
Congrats Baron and it looks great!
Thanks !
__________________
#1 car 2010 Black 2LTRS 1/28/10-10/15/11, 17900 miles
#2 car 2012 Red 2SSRS 10/15/11-
Mods: Outlaw Axelback & J Pipes /Magnaflow resonated X Pipe/Heritage&Stillen Grill/Halltech CAI/Apex Scoop,Washer Bottle/OEM Strut Tower Brace/VMax T/B/ G.M. Blade Spoiler/SLP Splitter/TSW Nurburgring wheels & Michelin Super Sport tires/JBA Shorty Headers,HiFlow cats & tune/Remote Clutch resovoir/ Pedders Supercar coilovers and Pedders 27mm/32mm ZL1 Spec sway bars / Whiteline craddle Inserts & Upper rear arm bushes/ 416/414 RW HP/TQ
VR Baron is online now   Reply With Quote
Old 03-15-2012, 09:01 PM   #7
VR Baron
SoCal Camaro5 Race Team
 
VR Baron's Avatar
 
Drives: 2012 VR 2SS RS M6
Join Date: Mar 2010
Location: SO CAL
Posts: 12,863
Quote:
Originally Posted by axis View Post
Nice flames.

I've had mine for 2yrs now and love it. Jim is a great guy to work with.
Yes he is.
I made a little change to mine. Got rid of the plastic line to the cai rubber hose. Changed out both with a section left over from my catch can. runs from the breather mount on the tube and under the cover to the main metal tube. Much cleaner
__________________
#1 car 2010 Black 2LTRS 1/28/10-10/15/11, 17900 miles
#2 car 2012 Red 2SSRS 10/15/11-
Mods: Outlaw Axelback & J Pipes /Magnaflow resonated X Pipe/Heritage&Stillen Grill/Halltech CAI/Apex Scoop,Washer Bottle/OEM Strut Tower Brace/VMax T/B/ G.M. Blade Spoiler/SLP Splitter/TSW Nurburgring wheels & Michelin Super Sport tires/JBA Shorty Headers,HiFlow cats & tune/Remote Clutch resovoir/ Pedders Supercar coilovers and Pedders 27mm/32mm ZL1 Spec sway bars / Whiteline craddle Inserts & Upper rear arm bushes/ 416/414 RW HP/TQ
VR Baron is online now   Reply With Quote
Old 03-15-2012, 10:35 PM   #8
SSMickey
SECC
 
SSMickey's Avatar
 
Drives: 2010 IBM 2SS
Join Date: Feb 2010
Location: Columbia S.C.
Posts: 1,429
I have the same one. The filter hits the hood blanket and has caused damage to it because it sticks up above the air box. Might want to check yours as it looks like it's going to do the same thing as mine. don't know what I'm going to do to fix it yet. Still overseas. Other than that, I think it's a great intake. Congrats.
__________________
Vengeance Stage II Cam, Halltech CAI, RX Catch Can, Full ARH Exhaust, QTP Cutouts, Powerbond 25% Underdrive, MGW Shifter, MTI Drop Springs, Forgeline RB3C Wheels, 3.91 gears, Night Owl LED Control System
SSMickey is offline   Reply With Quote
Old 03-15-2012, 10:44 PM   #9
GunnyG
Da WHALE
 
GunnyG's Avatar
 
Drives: 2014 Stingray, 2012 Panamera
Join Date: Dec 2011
Location: Oceanside, Ca - Originally from KCMO
Posts: 8,833
Awesome Rick! Looks clean and classy. Enjoy!
__________________
Project MantaRay...Underway
GunnyG is offline   Reply With Quote
Old 03-15-2012, 10:45 PM   #10
caverman


 
caverman's Avatar
 
Drives: '69 SS Convertible
Join Date: May 2009
Location: DFW, TX
Posts: 7,063
Quote:
Originally Posted by SSMickey View Post
I have the same one. The filter hits the hood blanket and has caused damage to it because it sticks up above the air box. Might want to check yours as it looks like it's going to do the same thing as mine. don't know what I'm going to do to fix it yet. Still overseas. Other than that, I think it's a great intake. Congrats.
You need to re-check your install. I've had mine for about 2 yrs now. My filter has never touched the insulation. I can see an imprent of the box in the insulation but that's it.


OP....you should paint the Halltech on the tube either Red, Silver, or Yellow. I did yellow for Yellow Jacket. I used a $6 paint pen from a hobby store.

Also, I'm being picky but I personally notice these kind of things. Take off your filter, flip the clamp so the screw is on the other side. Push it down as far as you can go and still reach it with a screw driver. Basically move it so it can't be seen. Same with the filter. Rotate it 180 so the metal strip in underneath and you don't see it.

Next up....you need to add an ADM scoop and do a water bottle relocation.
http://www.camaro5.com/forums/showth...light=halltech
Attached Images
 
__________________
-2010 Camaro 2SS | M6 | VR w/White Stripes | 1 3/4" KOOKS - 3" Magnaflow | LPE 3.91 gears | ADM tuned | Halltech w/ADM Scoop | Spohn/BMR Trailing Arm/Toe Rod | BC Coilovers| Pedders FE4 ZL1 swaybars | Cradle/Diff/Radius Rod bushings | VMax TB | Morimoto Projectors | MGW shifter | Red Calipers
Build Journal
caverman is offline   Reply With Quote
Old 03-15-2012, 11:19 PM   #11
VR Baron
SoCal Camaro5 Race Team
 
VR Baron's Avatar
 
Drives: 2012 VR 2SS RS M6
Join Date: Mar 2010
Location: SO CAL
Posts: 12,863
Quote:
Originally Posted by SSMickey View Post
I have the same one. The filter hits the hood blanket and has caused damage to it because it sticks up above the air box. Might want to check yours as it looks like it's going to do the same thing as mine. don't know what I'm going to do to fix it yet. Still overseas. Other than that, I think it's a great intake. Congrats.
Thanks!. I checked the box contact with the hood by chocking the seal to be sure I had complete contact with the hood and was perfect. No imprint, just enough to leave a chock outline on the pad. I bring it up also as the top of the filter base, the highest point of the filter where it connects to the tube is just lower then the seal and doesnt touch the hood pad so all good.

I did have to bend the mount bracket that attaches the box to the threaded rod a little, just to keep it forced down as far as it would go. The front pops up alittle but thats due to tolerances in where they put the hole for the tube to pass through.Cant go down any more as the filter end rests on the splash gaurd, but the hood closed takes care of that.
__________________
#1 car 2010 Black 2LTRS 1/28/10-10/15/11, 17900 miles
#2 car 2012 Red 2SSRS 10/15/11-
Mods: Outlaw Axelback & J Pipes /Magnaflow resonated X Pipe/Heritage&Stillen Grill/Halltech CAI/Apex Scoop,Washer Bottle/OEM Strut Tower Brace/VMax T/B/ G.M. Blade Spoiler/SLP Splitter/TSW Nurburgring wheels & Michelin Super Sport tires/JBA Shorty Headers,HiFlow cats & tune/Remote Clutch resovoir/ Pedders Supercar coilovers and Pedders 27mm/32mm ZL1 Spec sway bars / Whiteline craddle Inserts & Upper rear arm bushes/ 416/414 RW HP/TQ
VR Baron is online now   Reply With Quote
Old 03-15-2012, 11:33 PM   #12
VR Baron
SoCal Camaro5 Race Team
 
VR Baron's Avatar
 
Drives: 2012 VR 2SS RS M6
Join Date: Mar 2010
Location: SO CAL
Posts: 12,863
Quote:
Originally Posted by caverman View Post
You need to re-check your install. I've had mine for about 2 yrs now. My filter has never touched the insulation. I can see an imprent of the box in the insulation but that's it.


OP....you should paint the Halltech on the tube either Red, Silver, or Yellow. I did yellow for Yellow Jacket. I used a $6 paint pen from a hobby store.

Also, I'm being picky but I personally notice these kind of things. Take off your filter, flip the clamp so the screw is on the other side. Push it down as far as you can go and still reach it with a screw driver. Basically move it so it can't be seen. Same with the filter. Rotate it 180 so the metal strip in underneath and you don't see it.

Next up....you need to add an ADM scoop and do a water bottle relocation.

http://www.camaro5.com/forums/showth...light=halltech
Thanks for the reminder,I'm annal also about detail but busy so would have done it eventually. filter turned along with the band. My hose connection runs like yours also, nice and neat. I saw your thread on this and the idea for the name, red or yellow. Scoop will be later with the bottle fom Apex I guess. doesnt look like a lot of room behiand the box for the rotofab one but could be wrong.
__________________
#1 car 2010 Black 2LTRS 1/28/10-10/15/11, 17900 miles
#2 car 2012 Red 2SSRS 10/15/11-
Mods: Outlaw Axelback & J Pipes /Magnaflow resonated X Pipe/Heritage&Stillen Grill/Halltech CAI/Apex Scoop,Washer Bottle/OEM Strut Tower Brace/VMax T/B/ G.M. Blade Spoiler/SLP Splitter/TSW Nurburgring wheels & Michelin Super Sport tires/JBA Shorty Headers,HiFlow cats & tune/Remote Clutch resovoir/ Pedders Supercar coilovers and Pedders 27mm/32mm ZL1 Spec sway bars / Whiteline craddle Inserts & Upper rear arm bushes/ 416/414 RW HP/TQ
VR Baron is online now   Reply With Quote
Old 03-15-2012, 11:34 PM   #13
VR Baron
SoCal Camaro5 Race Team
 
VR Baron's Avatar
 
Drives: 2012 VR 2SS RS M6
Join Date: Mar 2010
Location: SO CAL
Posts: 12,863
Quote:
Originally Posted by GunnyG View Post
Awesome Rick! Looks clean and classy. Enjoy!
Thanks! Will do Aaron.
__________________
#1 car 2010 Black 2LTRS 1/28/10-10/15/11, 17900 miles
#2 car 2012 Red 2SSRS 10/15/11-
Mods: Outlaw Axelback & J Pipes /Magnaflow resonated X Pipe/Heritage&Stillen Grill/Halltech CAI/Apex Scoop,Washer Bottle/OEM Strut Tower Brace/VMax T/B/ G.M. Blade Spoiler/SLP Splitter/TSW Nurburgring wheels & Michelin Super Sport tires/JBA Shorty Headers,HiFlow cats & tune/Remote Clutch resovoir/ Pedders Supercar coilovers and Pedders 27mm/32mm ZL1 Spec sway bars / Whiteline craddle Inserts & Upper rear arm bushes/ 416/414 RW HP/TQ
VR Baron is online now   Reply With Quote
Old 03-16-2012, 09:26 AM   #14
SSGUNNER
Chu no guat a hasa is?
 
SSGUNNER's Avatar
 
Drives: 14 Jeep G Cherokee Overland HEMI
Join Date: Jun 2011
Location: Some where in So Cal
Posts: 4,216
Looks good Rick.
__________________
11 2SS/RSL99No Longer Stock (Sold) 6/19/14:AAC Plasma DRL's | Plug n play harness | Elite CC | Tint: 35% & 5% | LED Dome light | Show-N-Go Plate Holder | Flowmaster AT | C.A.I. Intake | VMAX CNC Spiral Ported TB | Husky Splash Guards
SSGUNNER is offline   Reply With Quote
Old 03-16-2012, 09:46 AM   #15
caverman


 
caverman's Avatar
 
Drives: '69 SS Convertible
Join Date: May 2009
Location: DFW, TX
Posts: 7,063
Quote:
Originally Posted by VR Baron View Post
Scoop will be later with the bottle fom Apex I guess. doesnt look like a lot of room behiand the box for the rotofab one but could be wrong.
The Apex bottle should work. The Roto-Fab or ADM will not work. Not enough room for those.
__________________
-2010 Camaro 2SS | M6 | VR w/White Stripes | 1 3/4" KOOKS - 3" Magnaflow | LPE 3.91 gears | ADM tuned | Halltech w/ADM Scoop | Spohn/BMR Trailing Arm/Toe Rod | BC Coilovers| Pedders FE4 ZL1 swaybars | Cradle/Diff/Radius Rod bushings | VMax TB | Morimoto Projectors | MGW shifter | Red Calipers
Build Journal
caverman is offline   Reply With Quote
Old 03-16-2012, 09:53 AM   #16
VR Baron
SoCal Camaro5 Race Team
 
VR Baron's Avatar
 
Drives: 2012 VR 2SS RS M6
Join Date: Mar 2010
Location: SO CAL
Posts: 12,863
Quote:
Originally Posted by caverman View Post
The Apex bottle should work. The Roto-Fab or ADM will not work. Not enough room for those.
Thought so, thanks!
__________________
#1 car 2010 Black 2LTRS 1/28/10-10/15/11, 17900 miles
#2 car 2012 Red 2SSRS 10/15/11-
Mods: Outlaw Axelback & J Pipes /Magnaflow resonated X Pipe/Heritage&Stillen Grill/Halltech CAI/Apex Scoop,Washer Bottle/OEM Strut Tower Brace/VMax T/B/ G.M. Blade Spoiler/SLP Splitter/TSW Nurburgring wheels & Michelin Super Sport tires/JBA Shorty Headers,HiFlow cats & tune/Remote Clutch resovoir/ Pedders Supercar coilovers and Pedders 27mm/32mm ZL1 Spec sway bars / Whiteline craddle Inserts & Upper rear arm bushes/ 416/414 RW HP/TQ
VR Baron is online now   Reply With Quote
Old 03-16-2012, 11:38 AM   #17
axis
Search Ninja
 
axis's Avatar
 
Drives: 2010 Black 2SS/RS A6
Join Date: Oct 2009
Location: Central Ark
Posts: 7,185
Fitment can be picky on this thing. Make sure the bottom is lined up well and make sure the SS AC lines are running through the proper cutouts. If they aren't in their cutouts, it won't fit the way it should.
__________________
2010 Black 2SS/RS A6
Halltech CF 102 fed
GPI modded intake manifold
Bo (knows) White ported TB
Kooks LT's/ Dynomax VT
Pfadted (springs/sways)
Dyno tuned by Rhino and GPI

I once parallel parked a train.
axis is offline   Reply With Quote
Old 03-16-2012, 11:48 AM   #18
IndeedSS1


 
IndeedSS1's Avatar
 
Drives: 2010 Camaro SS LS3
Join Date: Sep 2010
Location: Eastern MO
Posts: 3,804
Quote:
Originally Posted by axis View Post
Fitment can be picky on this thing. Make sure the bottom is lined up well and make sure the SS AC lines are running through the proper cutouts. If they aren't in their cutouts, it won't fit the way it should.

Agreed!
__________________


She is only memory now.
IndeedSS1 is offline   Reply With Quote
Old 03-16-2012, 02:13 PM   #19
VR Baron
SoCal Camaro5 Race Team
 
VR Baron's Avatar
 
Drives: 2012 VR 2SS RS M6
Join Date: Mar 2010
Location: SO CAL
Posts: 12,863
Quote:
Originally Posted by axis View Post
Fitment can be picky on this thing. Make sure the bottom is lined up well and make sure the SS AC lines are running through the proper cutouts. If they aren't in their cutouts, it won't fit the way it should.
I'm lucky there I think. my 2010 had two lines. the 2012 has only one so fits just fine,one rectangular cutout in bottom wall of box.
__________________
#1 car 2010 Black 2LTRS 1/28/10-10/15/11, 17900 miles
#2 car 2012 Red 2SSRS 10/15/11-
Mods: Outlaw Axelback & J Pipes /Magnaflow resonated X Pipe/Heritage&Stillen Grill/Halltech CAI/Apex Scoop,Washer Bottle/OEM Strut Tower Brace/VMax T/B/ G.M. Blade Spoiler/SLP Splitter/TSW Nurburgring wheels & Michelin Super Sport tires/JBA Shorty Headers,HiFlow cats & tune/Remote Clutch resovoir/ Pedders Supercar coilovers and Pedders 27mm/32mm ZL1 Spec sway bars / Whiteline craddle Inserts & Upper rear arm bushes/ 416/414 RW HP/TQ
VR Baron is online now   Reply With Quote
Old 03-16-2012, 03:12 PM   #20
axis
Search Ninja
 
axis's Avatar
 
Drives: 2010 Black 2SS/RS A6
Join Date: Oct 2009
Location: Central Ark
Posts: 7,185
Quote:
Originally Posted by VR Baron View Post
I'm lucky there I think. my 2010 had two lines. the 2012 has only one so fits just fine,one rectangular cutout in bottom wall of box.


I don't know how many people complained of crappy fitment only to find out they missed those lines. Once fitted in the cutouts, everything was golden.
__________________
2010 Black 2SS/RS A6
Halltech CF 102 fed
GPI modded intake manifold
Bo (knows) White ported TB
Kooks LT's/ Dynomax VT
Pfadted (springs/sways)
Dyno tuned by Rhino and GPI

I once parallel parked a train.
axis is offline   Reply With Quote
Old 03-16-2012, 07:18 PM   #21
Halltech
 
Drives: 2010 Halltech Camaro SS, 2008 C6Z06
Join Date: Sep 2009
Location: Milwaukee, WI
Posts: 363
Quote:
Originally Posted by SM0KE View Post
Congrats! I also have Halltech
I dont want to highjack your thread but here is mine painted.



Sorry about the engine fire
Halltech is offline   Reply With Quote
Old 03-17-2012, 07:15 AM   #22
JANNETTYRACING
PRESIDENT CALIBRATOR JRE

 
JANNETTYRACING's Avatar
 
Drives: YELLOW 2013 ZL1 AUTO
Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 9,230
Quote:
Originally Posted by VR Baron View Post
Installed the Halltech cai on Wednesday. Only took an hour.No instructions but easy and straight forward, also had help from a thread here. One thing I did was instead of cutting the plastic pcv line to the intake tube so it would fit into the rubber hose with the kit, I cut a larger dia hose pc that the plastic line with the fitting attached could slip into and also the rubber line from the kit would also. Worked perfectly and oem line intact.
Initial 15 miles car felt better, easier off the line and accelerated more smoothly, will see after the ecu relearns the new setup.Not much sound, a bit more rumble but exhaust hides most of it.Later will paint the tube gloss black and the box red.
More pics in my journal thread also.
Congrats, Well Made System, Does not get enough Credit.

Ted.
__________________
Technical information, Parts Sales, Professional Installation, and Custom Dyno Tuning.
Please vist our web sites for all your performance needs!
Ted Jannetty
Jannetty Racing Ent Inc.
2984 East Main St.
Waterbury Ct. 06705
203-753-7223
tedj@jannettyracing.com
www.jannettyracing.com
www.turboaddictionparts.com
Performance Parts
JANNETTYRACING is offline   Reply With Quote
Old 03-17-2012, 08:10 AM   #23
IndeedSS1


 
IndeedSS1's Avatar
 
Drives: 2010 Camaro SS LS3
Join Date: Sep 2010
Location: Eastern MO
Posts: 3,804
Halltech's strong point is how big their filter is compared to others.
__________________


She is only memory now.
IndeedSS1 is offline   Reply With Quote
Old 03-17-2012, 11:05 AM   #24
VR Baron
SoCal Camaro5 Race Team
 
VR Baron's Avatar
 
Drives: 2012 VR 2SS RS M6
Join Date: Mar 2010
Location: SO CAL
Posts: 12,863
Quote:
Originally Posted by JANNETTYRACING View Post
Congrats, Well Made System, Does not get enough Credit.

Ted.
Thanks Ted !
__________________
#1 car 2010 Black 2LTRS 1/28/10-10/15/11, 17900 miles
#2 car 2012 Red 2SSRS 10/15/11-
Mods: Outlaw Axelback & J Pipes /Magnaflow resonated X Pipe/Heritage&Stillen Grill/Halltech CAI/Apex Scoop,Washer Bottle/OEM Strut Tower Brace/VMax T/B/ G.M. Blade Spoiler/SLP Splitter/TSW Nurburgring wheels & Michelin Super Sport tires/JBA Shorty Headers,HiFlow cats & tune/Remote Clutch resovoir/ Pedders Supercar coilovers and Pedders 27mm/32mm ZL1 Spec sway bars / Whiteline craddle Inserts & Upper rear arm bushes/ 416/414 RW HP/TQ
VR Baron is online now   Reply With Quote
Old 03-17-2012, 11:07 AM   #25
VR Baron
SoCal Camaro5 Race Team
 
VR Baron's Avatar
 
Drives: 2012 VR 2SS RS M6
Join Date: Mar 2010
Location: SO CAL
Posts: 12,863
Quote:
Originally Posted by IndeedSS1 View Post
Halltech's strong point is how big their filter is compared to others.
Thats what a member friend said when he saw it!

The one on the Airaid I had on my 2010 was big also, just more rectangular in shape.
__________________
#1 car 2010 Black 2LTRS 1/28/10-10/15/11, 17900 miles
#2 car 2012 Red 2SSRS 10/15/11-
Mods: Outlaw Axelback & J Pipes /Magnaflow resonated X Pipe/Heritage&Stillen Grill/Halltech CAI/Apex Scoop,Washer Bottle/OEM Strut Tower Brace/VMax T/B/ G.M. Blade Spoiler/SLP Splitter/TSW Nurburgring wheels & Michelin Super Sport tires/JBA Shorty Headers,HiFlow cats & tune/Remote Clutch resovoir/ Pedders Supercar coilovers and Pedders 27mm/32mm ZL1 Spec sway bars / Whiteline craddle Inserts & Upper rear arm bushes/ 416/414 RW HP/TQ
VR Baron is online now   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
CAI Inc Intake Are IN STOCK @ Camaro5's #1 CAI Distributor: APEX Motorsports!!! Apex Motorsports V8 Bolt-Ons & Tunes 98 08-20-2014 06:45 PM
Halltech CAI installed :) wbt Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons 244 02-27-2012 11:04 AM
Just installed CAI... Mikef 2SS/RS Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons 27 09-20-2011 02:58 PM
Installed my new CAI, inc. CAI!! eL_777 Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons 14 09-15-2011 02:55 PM
Flowmaster American Thunder and Roto-Fab CAI Installed odog Camaro V6 LLT Engine, Exhaust, and Bolt-Ons 15 08-20-2010 10:39 AM


All times are GMT -5. The time now is 10:37 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.