dyno erie-pittsburgh area? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

nomadicdogg · 03-23-2012, 09:25 PM

Is there any dyno's local "between Erie and Pittsburgh" that I could take my car too?
The only one I know of is Wyotech near Murrysville, but I dont think they allow general use for it...
Anyone?

Supermaro585HP · 03-23-2012, 09:44 PM

I would like to find one near Pittsburgh. I don't mind driving a fews hours for a good tune and to see my numbers.

tkjohn25 · 03-23-2012, 10:12 PM

Sarver performance has a dyno. They are doing my cam and dyno tune next week.

nomadicdogg · 03-24-2012, 02:48 PM

Quote:

Originally Posted by tkjohn25

Sarver performance has a dyno. They are doing my cam and dyno tune next week.

where is that located??
I think ive been near sarver but not 100%

Supermaro585HP · 03-24-2012, 02:53 PM

Is that right off 28?? Going towards Kittanning????

demonspeed · 03-24-2012, 03:27 PM

It's kind of out in the middle of nowhere. Just look up Jack's Ford -- the shop is essentially across the street (behind the furniture place) heading east on 228.

Jamie Mac · 03-24-2012, 08:10 PM

Lutz Racing in Mars has one. 724-272-3753

nomadicdogg · 03-24-2012, 08:12 PM

Thanks guys... Would like to see what mine has.

demonspeed · 03-25-2012, 09:07 AM

Quote:

Originally Posted by Jamie Mac

Lutz Racing in Mars has one. 724-272-3753

Where's this at?

Jamie Mac · 03-25-2012, 11:00 AM

Sorry, not Mars. He's at 119 Kline ave, Callery, pa. He's tied in with Fort Pitt Racing too. PACE did a Dyno day there once and that's how I found out about them. They build 200+ mph drag cars. I don't really know anything else about them but they do have a dynojet. My car was tuned there but they Had Brian@pcmforless come in and tune it.

Nomadic dog, their prices for a 3 Dyno runs seemed to be the same as others I've seen. I think they even gave a discount if you ran your car. It's been about 2 years since I've been there though.

demonspeed · 03-25-2012, 12:40 PM

Oh, it must be in that building near the Fox's pizza. My buddy was trying to buy a third gen roller from them, but they'd never call back.

Jamie Mac · 03-25-2012, 08:11 PM

Yes. That's the place.

MS3DALE · 03-25-2012, 09:15 PM

This place is only a few miles from me,and they have an MD Mustang dyno (I don't like Dynojet dynos due to the inflated numbers they give) and they do rent it out....

http://www.rodeheavershotrod.com/mus...no_tuning.html

http://www.rodeheavershotrod.com/mustang_peformance.php

nomadicdogg · 04-02-2012, 06:52 PM

thanks again guys

tkjohn25 · 04-05-2012, 01:27 PM

Brandon from Sarver Performance just called to tell me my cam install and dyno tune is complete. 483 at the wheels!

demonspeed · 04-05-2012, 01:44 PM

Time for the track to see what it's capable of.

Seer · 04-05-2012, 02:22 PM

where is this lutz racing dyno?

tkjohn25 · 04-05-2012, 02:52 PM

Quote:

Originally Posted by demonspeed

Time for the track to see what it's capable of.

Couldn't agree more!!

demonspeed · 04-05-2012, 03:29 PM

Quote:

Originally Posted by Seer

where is this lutz racing dyno?

Off Mars-Evans City Road near Fox's Pizza (Kline Ave like Jamie said). Right before the bridge into "downtown" Callery. Blink and you'll miss it.

Seer · 04-05-2012, 05:44 PM

Quote:

Originally Posted by demonspeed

Off Mars-Evans City Road near Fox's Pizza (Kline Ave like Jamie said). Right before the bridge into "downtown" Callery. Blink and you'll miss it.

I'll have to call him, thats really close. Wonder what his rates are and schedule is like. Seems like he builds a lot of high hp cars, curious if he will even let street cars dyno.

screamin eagle · 04-11-2012, 04:46 PM

I'm not sure of all the info but a guy on here is having a dyno day this Saturday. Boostedyards is his name. I was trying to find more info myself. $50 for two pulls. 9:00am Til 9:00 pm. He is near new kensington

nomadicdogg · 04-11-2012, 04:50 PM

Quote:

Originally Posted by screamin eagle

I'm not sure of all the info but a guy on here is having a dyno day this Saturday. Boostedyards is his name. I was trying to find more info myself. $50 for two pulls. 9:00am Til 9:00 pm. He is near new kensington

as usual I will be working this saturday.... but thanks for the heads up. I appreciate it

velociSSimo · 04-11-2012, 06:33 PM

I have a certifIcate for TIdyno in Ashtabula, OH. It's good for 3 pulls with A/F. I won it last year and it's yours if you want it.

03-23-2012, 09:25 PM	#1
nomadicdogg from 55 belair to '10 SS Drives: '10 2SS/RS Cyber Grey Camaro M6 Join Date: Nov 2010 Location: Western, PA Posts: 1,791 View My Garage	dyno erie-pittsburgh area? Is there any dyno's local "between Erie and Pittsburgh" that I could take my car too? The only one I know of is Wyotech near Murrysville, but I dont think they allow general use for it... Anyone? __________________ It Not Only Is A 2010 Camaro. It's A 2010 Camaro With The Soul Of A 1955 Chevy.

03-23-2012, 09:44 PM	#2
Supermaro585HP Drives: 2011 Camaro SS RS Join Date: Aug 2011 Location: Pittsburgh, PA Posts: 1,148 View My Garage	I would like to find one near Pittsburgh. I don't mind driving a fews hours for a good tune and to see my numbers. __________________

03-24-2012, 02:53 PM	#5
Supermaro585HP Drives: 2011 Camaro SS RS Join Date: Aug 2011 Location: Pittsburgh, PA Posts: 1,148 View My Garage	Is that right off 28?? Going towards Kittanning???? __________________

03-24-2012, 03:27 PM	#6
demonspeed Drives: 2002 BRR SS M6 Join Date: Apr 2010 Location: Pittsburgh Posts: 1,621	It's kind of out in the middle of nowhere. Just look up Jack's Ford -- the shop is essentially across the street (behind the furniture place) heading east on 228. __________________ '05 GTO\|'02 SS\|'01 Z28\|'00 SS\|'93 GT\|'91 Z28\|'89 IROC-Z

03-24-2012, 08:10 PM	#7
Jamie Mac Tired of whiners Drives: 2010 SS/RS IOM Join Date: Mar 2009 Location: Pittsburgh Posts: 2,156	Lutz Racing in Mars has one. 724-272-3753 __________________ When Mullets drove Camaro's, they didn't just know their car was fast, they set down their wax applicator and proved their car was fast. -J.M. March, 2012

03-23-2012, 10:12 PM	#3
tkjohn25 Drives: 2011 Camaro SS Join Date: Feb 2011 Location: North Huntingdon, Pa Posts: 60	Sarver performance has a dyno. They are doing my cam and dyno tune next week.

03-24-2012, 08:12 PM	#8
nomadicdogg from 55 belair to '10 SS Drives: '10 2SS/RS Cyber Grey Camaro M6 Join Date: Nov 2010 Location: Western, PA Posts: 1,791 View My Garage	Thanks guys... Would like to see what mine has. __________________ It Not Only Is A 2010 Camaro. It's A 2010 Camaro With The Soul Of A 1955 Chevy.

03-25-2012, 11:00 AM	#10
Jamie Mac Tired of whiners Drives: 2010 SS/RS IOM Join Date: Mar 2009 Location: Pittsburgh Posts: 2,156	Sorry, not Mars. He's at 119 Kline ave, Callery, pa. He's tied in with Fort Pitt Racing too. PACE did a Dyno day there once and that's how I found out about them. They build 200+ mph drag cars. I don't really know anything else about them but they do have a dynojet. My car was tuned there but they Had Brian@pcmforless come in and tune it. Nomadic dog, their prices for a 3 Dyno runs seemed to be the same as others I've seen. I think they even gave a discount if you ran your car. It's been about 2 years since I've been there though. __________________ When Mullets drove Camaro's, they didn't just know their car was fast, they set down their wax applicator and proved their car was fast. -J.M. March, 2012

03-25-2012, 12:40 PM	#11
demonspeed Drives: 2002 BRR SS M6 Join Date: Apr 2010 Location: Pittsburgh Posts: 1,621	Oh, it must be in that building near the Fox's pizza. My buddy was trying to buy a third gen roller from them, but they'd never call back. __________________ '05 GTO\|'02 SS\|'01 Z28\|'00 SS\|'93 GT\|'91 Z28\|'89 IROC-Z

03-25-2012, 08:11 PM	#12
Jamie Mac Tired of whiners Drives: 2010 SS/RS IOM Join Date: Mar 2009 Location: Pittsburgh Posts: 2,156	Yes. That's the place. __________________ When Mullets drove Camaro's, they didn't just know their car was fast, they set down their wax applicator and proved their car was fast. -J.M. March, 2012

03-25-2012, 09:15 PM	#13
MS3DALE Drives: 2011 2SS/RS LS3/6M Litho#190 Join Date: May 2010 Location: Carmichaels,Pa. Posts: 2,114 View My Garage	This place is only a few miles from me,and they have an MD Mustang dyno (I don't like Dynojet dynos due to the inflated numbers they give) and they do rent it out.... http://www.rodeheavershotrod.com/mus...no_tuning.html http://www.rodeheavershotrod.com/mustang_peformance.php __________________ '11 IOM 2SS/RS LS3/6M HURST - Roto-Fab CAI-Kook's LTs-CORSA-Black Bear tuned Proud Litho owner #190 - Homecoming Litho #120 '07 SILVERADO Z71 1500 Ext.Cab Z71 6.0 "VortecMAX"-GMPP CAI-CORSA-Black Bear tuned Last edited by MS3DALE; 03-25-2012 at 09:28 PM.

04-02-2012, 06:52 PM	#14
nomadicdogg from 55 belair to '10 SS Drives: '10 2SS/RS Cyber Grey Camaro M6 Join Date: Nov 2010 Location: Western, PA Posts: 1,791 View My Garage	thanks again guys __________________ It Not Only Is A 2010 Camaro. It's A 2010 Camaro With The Soul Of A 1955 Chevy.

04-05-2012, 01:27 PM	#15
tkjohn25 Drives: 2011 Camaro SS Join Date: Feb 2011 Location: North Huntingdon, Pa Posts: 60	Brandon from Sarver Performance just called to tell me my cam install and dyno tune is complete. 483 at the wheels!

04-05-2012, 01:44 PM	#16
demonspeed Drives: 2002 BRR SS M6 Join Date: Apr 2010 Location: Pittsburgh Posts: 1,621	Time for the track to see what it's capable of. __________________ '05 GTO\|'02 SS\|'01 Z28\|'00 SS\|'93 GT\|'91 Z28\|'89 IROC-Z

04-05-2012, 02:22 PM	#17
Seer Drives: 2012 Shelby GT500 Join Date: Mar 2012 Location: Cranberry Township, PA Posts: 993	where is this lutz racing dyno? __________________ 2012 Shelby GT500 2012 Mustang GT

04-11-2012, 04:46 PM	#21
screamin eagle screamin eagle Drives: 2011 Camaro RJT SS/RS Conv. Join Date: Dec 2010 Location: North Hills of Pgh. Posts: 221	I'm not sure of all the info but a guy on here is having a dyno day this Saturday. Boostedyards is his name. I was trying to find more info myself. $50 for two pulls. 9:00am Til 9:00 pm. He is near new kensington __________________ 2011 Camaro RJT Gray Leather Int. Black Top, 2SS/RS Conv. M6 w/Hurst Shifter, CG Stripes, 20" Polished Wheels, Heritage Grill, (paint matched) w/SS emblem in center. CAI cold air intake, RX Performance Catch Can, Oil Cap Filter, (paint matched) VMAX Ported Throttle Body, (paint matched) ADM Scoop (my version), Roto Fab w/w bottle relocation kit, V8 Flags on Fenders. Painted fuse box cover. GM paint matched splash guards. Stainless Works LT headers and Hi-Flow Cats, SCT Tune from Jannetty Racing, Pfadt Rear Trailing Arms and Tie Rods. GM footwell and cupholder lighting option.

04-11-2012, 06:33 PM	#23
velociSSimo ... well, not yet. Drives: 2012 Chevy Silverado ZL1 Join Date: Apr 2011 Location: NE Ohio Posts: 1,233	I have a certifIcate for TIdyno in Ashtabula, OH. It's good for 3 pulls with A/F. I won it last year and it's yours if you want it. __________________ 1988 Wellcraft St. Tropez / 32' Length / Twin 454ci

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Recommended Dyno Tuner in Austin Area	bottjeremy	USA - Texas	11	06-24-2011 11:46 AM
Anyone in Smyrna - Nashville, TN Area Interested In A Dyno Day!!	RAYSRT8	USA - Southeast	17	06-22-2011 08:44 AM
Good dealer for BCM reprograms in Pittsburgh area?	scuba264	USA - NY / NJ / PA	5	03-16-2011 09:50 AM
Pittsburgh area help!!	ZZcamaro	USA - NY / NJ / PA	10	09-13-2010 02:56 PM
Pittsburgh Area - GMS	10redrocket	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	9	01-27-2009 09:57 PM