Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
TireRack
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Engine | Drivetrain | Powertrain Technical Discussions > Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons


Reply
 
Thread Tools
Old 03-27-2012, 04:32 PM   #1
ssmax90
 
Drives: 2011 camaro ss CGM M6
Join Date: Jun 2010
Location: Rancho cucamonga, CA
Posts: 74
got about 1200 to spend

I got 1200 and looking to get the most out of it not sure if im ready for long tubes or a tune just yet anything iIcan do before I get there? I already have a CAI and a flowmaster axel back. suggestions would be great thanks all.
__________________
2006 2500 duramax diesel- PPE tuner, boost tubes 5 Inch straight pipe, Mike L stage III trans, Banks intake= SOLD

2011 camaro ss M6 CGM
k&N Intake, Mufflers deleted
ssmax90 is offline   Reply With Quote
Old 03-27-2012, 04:43 PM   #2
HufferSS
I Wanna Go Faster!!
 
HufferSS's Avatar
 
Drives: 2011 2SS Synergy Green M6
Join Date: Apr 2011
Location: SC
Posts: 3,328
Where are you trying to take the car? Drag racing..road racing...street cruiser?

Drag Racer I'd buy some drag radials.
Road Racer I'd invest in some Pfadt Suspension products.
Street Cruiser I'd save a little more money and buy some smoking hot wheels.
__________________
Built by Vengeance Racing
9.31@154.81 mph
Procharger F1-X
RPM Level 7 4L80e + Coan Converter
Hendrix 9" Rear Axle + 3.50 Gear
ARH 2" LTs+3.5" Exhaust
Fore Fuel System, Bogarts + Hoosier Slicks
Pfadt Drag Pack Suspension
My Build Thread | Best Pass To Date
HufferSS is offline   Reply With Quote
Old 03-27-2012, 04:45 PM   #3
ssmax90
 
Drives: 2011 camaro ss CGM M6
Join Date: Jun 2010
Location: Rancho cucamonga, CA
Posts: 74
very true I just wanna do some tweaking to keep my car faster then my buddies evo X. I might be trying out some road racing in a few months since street legal drags in my area are non existent
__________________
2006 2500 duramax diesel- PPE tuner, boost tubes 5 Inch straight pipe, Mike L stage III trans, Banks intake= SOLD

2011 camaro ss M6 CGM
k&N Intake, Mufflers deleted
ssmax90 is offline   Reply With Quote
Old 03-27-2012, 05:12 PM   #4
HufferSS
I Wanna Go Faster!!
 
HufferSS's Avatar
 
Drives: 2011 2SS Synergy Green M6
Join Date: Apr 2011
Location: SC
Posts: 3,328
Quote:
Originally Posted by ssmax90 View Post
very true I just wanna do some tweaking to keep my car faster then my buddies evo X. I might be trying out some road racing in a few months since street legal drags in my area are non existent

Pfadt lowering springs and their rear bushing kit will tighten the car up nicely and help it get around the track quicker.
__________________
Built by Vengeance Racing
9.31@154.81 mph
Procharger F1-X
RPM Level 7 4L80e + Coan Converter
Hendrix 9" Rear Axle + 3.50 Gear
ARH 2" LTs+3.5" Exhaust
Fore Fuel System, Bogarts + Hoosier Slicks
Pfadt Drag Pack Suspension
My Build Thread | Best Pass To Date
HufferSS is offline   Reply With Quote
Old 03-27-2012, 05:18 PM   #5
ssmax90
 
Drives: 2011 camaro ss CGM M6
Join Date: Jun 2010
Location: Rancho cucamonga, CA
Posts: 74
yea been leaning towards that just wondering if i would like suspension before power
__________________
2006 2500 duramax diesel- PPE tuner, boost tubes 5 Inch straight pipe, Mike L stage III trans, Banks intake= SOLD

2011 camaro ss M6 CGM
k&N Intake, Mufflers deleted
ssmax90 is offline   Reply With Quote
Old 03-27-2012, 05:20 PM   #6
velociSSimo
... well, not yet.
 
velociSSimo's Avatar
 
Drives: 2012 Chevy Silverado ZL1
Join Date: Apr 2011
Location: NE Ohio
Posts: 1,216
Lowering springs, bushings, and sways! Just got a whole ZL1 sway/bushing package from Pedders for under that price. My springs are from Pfadt though.
__________________
1988 Wellcraft St. Tropez / 32' Length / Twin 454ci
velociSSimo is offline   Reply With Quote
Old 03-27-2012, 05:44 PM   #7
The SwiftChancelor
 
The SwiftChancelor's Avatar
 
Drives: SGM, 2011 2SS/RS, L99
Join Date: Oct 2011
Location: Wildcat Country
Posts: 593
If your wanting power you could do the Stainless Power headers and a Jannetty SCT tune for under that price. You could even go cheaper and get some OBX headers which tons of people seem to be happy with. Then you'll have extra dough for the install or a ported tb, thats next on my list or the scoop/ washer bottle relocation.
__________________
K&N air intake, Solo w/Jpipes axleback, SP 1 7/8 LT headers
The SwiftChancelor is offline   Reply With Quote
Old 03-27-2012, 05:49 PM   #8
TonyC
 
TonyC's Avatar
 
Drives: 2010 2SS/RS
Join Date: Mar 2012
Location: New York
Posts: 194
4.10s
__________________
2010 camaro 2ss/rs
Afe intake,Ported heads,ported manifold &TB,Big Cam, Arh longtubes w/3",25% underdrive,aluminum flywheel,zr1 clutch, tranzilla 6060, gforce 9" strac 430s...worst tune in the world...dc power 300amp alt, audison/kenwwod/cdt system.pfadt/eibach/hotchkis/bmr susp...vented/drilled rotors, hawk pads,s/s lines
work in progress : Full electric power steering & Airride
TonyC is offline   Reply With Quote
Old 03-27-2012, 07:38 PM   #9
brantley847
v It bites.
 
brantley847's Avatar
 
Drives: 2011 IBM 2SS/RS
Join Date: May 2008
Location: Orlando, FL
Posts: 3,405
long tube headers...

the best mod for the buck out of all my mods to date. Literally, the grin was twice the size from when I drove the car off the lot day 1. Suspension products do make the ride so sweet, but I cannot look past the incredible sound of headers man...

BUT... it does appear you still have your power train warranty so I could see how that would be a tough first step.
__________________
2011 2SS/RS
Performance: 439 RWHP A6: 226/236 Comp Cam, Kooks 1-7/8, CAInc, Borla S type, FTI Converter, Vmax TB, Rx Catch Can, Trans cooler, SLP 160 termo, Melling high volume, Eibach Springs/Sways 1" drop, Whiteline complete bushing kit.
Appearance:Smoked side markers and black bowties. Blk / Blue Carbon Fiber interior trim.

Next in order: F14s, 3.70 gears, DSS Axles, End links/Toe rods/trailing arms, Ported heads, S/C.







1100 7/02 Ordered
3800 8/09 Order produced
4200 8/13 Shipped
6000 8/24 HOME!
brantley847 is offline   Reply With Quote
Old 03-27-2012, 07:45 PM   #10
2012InfernoSS

 
2012InfernoSS's Avatar
 
Drives: 93GMC sierra stepside/2012 SS
Join Date: Dec 2011
Location: San Antonio, Texas
Posts: 911
Im thinking about headers and mines only got 3900 miles on it :(
2012InfernoSS is offline   Reply With Quote
Old 03-27-2012, 10:22 PM   #11
2010 SSRS



 
2010 SSRS's Avatar
 
Drives: 3 V8 Camaros
Join Date: May 2009
Location: The Ocean State
Posts: 111,211
definitely get long tubes, my LT's were on with less than 100 miles.
__________________
Jannetty Racing JRE Street Package
2010 SSRS is offline   Reply With Quote
Old 03-27-2012, 10:39 PM   #12
AzItaliaSS
 
AzItaliaSS's Avatar
 
Drives: 2010 2ss RJT LS3
Join Date: Aug 2011
Location: GILBERT,ARIZONA
Posts: 677
go with some longtubes,sweet tune, maybe x-pipe
AzItaliaSS is offline   Reply With Quote
Old 03-28-2012, 12:15 AM   #13
pistolgripcopo1
pistolgripcopo1
 
pistolgripcopo1's Avatar
 
Drives: 2010 SS Camaro Carbon fiber gray
Join Date: Mar 2012
Location: Corona Ca.
Posts: 400
As far as headers, Stainless Power subsid. of Stainless Works, are a good choice. 304 stainless no need for coating, mandrell bent for smooth flow, light weight, thick flang for good seal, good fit and finish, good price and oh yea good hp. gain.
__________________
pistolgripcopo1 is offline   Reply With Quote
Old 03-28-2012, 12:48 AM   #14
blk5genss
 
blk5genss's Avatar
 
Drives: 2010 Camaro 1SS/RS
Join Date: Jan 2011
Location: San Anonio, Texas
Posts: 574
I got 3.91's and the install kit for 1025 shipped!!
__________________
TSP Cam 231/236 112 LSA,TSP UD,Fast 102 w/Ported TB,AirAid CAI,1 7/8 catted Stainless Power LT,3 IN MBRP 3 in Exhaust/180*,Spohn LTA's,Toe Links, Drag Bar,Diff bushings,Hurst shifter,Hendrix/DSS 1400HP Axles,Nitto NT555R's,Lethal Performance Custon Tune 480 RWHP 454 RWTQ!! Best run so far is 11.94@121 LPE 3.91's Coming soon NW 102, and DSS DS, then car should be complete!!!
blk5genss is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
$2000.00 to spend and need help SJR 2012 SS Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons 5 01-19-2012 11:59 PM
Help me spend $300 Ice Demon Camaro V6 LLT Engine, Exhaust, and Bolt-Ons 22 01-01-2012 01:26 AM
Money to spend owensmat Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons 22 12-21-2011 02:02 PM
Money to spend on mods, Any ideas? Cj0n3s12 5th Gen Camaro SS LS LT General Discussions 18 11-23-2011 10:30 AM
GM Plans to Spend $1 Billion on New-Product Development KILLER74Z28 General Automotive + Other Cars Discussion 0 01-12-2007 06:04 PM


All times are GMT -5. The time now is 11:49 PM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2016, vBulletin Solutions, Inc.