Project clutch master cylinder/second gear grind - Page 29 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

IDEALG · 08-21-2012, 07:05 AM

Quote:

Originally Posted by CamaroGirl5

Could that be why I am getting clutch chatter too possibly? (not super car techy so I could be way off...)

I have the Mcleod RXT.

Not sure if they will warranty it? I have alot of mods...

if you've already changed your clutch it's probably not the pressure plate bolts.

CyberPredator · 08-21-2012, 10:33 AM

Just ordered one.

IDEALG · 08-21-2012, 10:37 AM

Quote:

Originally Posted by CyberPredator

Just ordered one.

wierd i didn't receive an email confirmation from paypal, but i checked my account and your there so I'm sending it out. thanks

IDEALG · 08-21-2012, 11:29 AM

Cyber- shipped

CyberPredator · 08-21-2012, 11:34 AM

thanks!

Burnt_RS · 08-22-2012, 08:43 PM

Just sent payment via paypal. I'm looking forward to getting this installed!

IDEALG · 08-23-2012, 06:25 AM

Quote:

Originally Posted by Burnt_RS

Just sent payment via paypal. I'm looking forward to getting this installed!

shipping out this morning, thanks

ramsman34 · 08-24-2012, 01:57 PM

IDealG get TWO THUMBS WAAAY UP FROM ME. There is no greater value here than a vendor you can trust!!

Thanks for your advice!!!

IDEALG · 08-24-2012, 02:04 PM

Quote:

Originally Posted by ramsman34

IDealG get TWO THUMBS WAAAY UP FROM ME. There is no greater value here than a vendor you can trust!!

Thanks for your advice!!!

appreciate the kind words

1977and2010 · 08-24-2012, 11:03 PM

Finally got to drive mine and really lay into it today. It felt great. The master definitely helped with the notchiness. I never had the grind I hear about, but it sure was hard to get in gear sometimes. Now it just glides in. Smooth like butta. Thanks IdealG.

IDEALG · 08-25-2012, 06:11 AM

Quote:

Originally Posted by 1977and2010

Finally got to drive mine and really lay into it today. It felt great. The master definitely helped with the notchiness. I never had the grind I hear about, but it sure was hard to get in gear sometimes. Now it just glides in. Smooth like butta. Thanks IdealG.

always a pleasure to hear good results.

IDEALG · 08-27-2012, 07:41 AM

all orders from this weekend have shipped, thanks guys.

RxDoc08 · 08-27-2012, 08:38 PM

Just ordered mine tonight. Can't wait to get this thing on.

IDEALG · 08-27-2012, 08:51 PM

Quote:

Originally Posted by RxDoc08

Just ordered mine tonight. Can't wait to get this thing on.

cool will ship out tomorrow morning.

Ventmaster · 08-31-2012, 01:37 PM

I was hoping someone would know the size the bleeder valve is on the V6 Camaro. I'm thinking 10 or 11mm most likely.

Or just give me a good idea where to look, and I'll check it myself.

Thanks in advance-

IDEALG · 08-31-2012, 01:44 PM

Quote:

Originally Posted by Ventmaster

I was hoping someone would know the size the bleeder valve is on the V6 Camaro. I'm thinking 10 or 11mm most likely.

Or just give me a good idea where to look, and I'll check it myself.

Thanks in advance-

Should be right there under the car on the drivers side of the trans. be careful its a plastic/nylon line it breaks easily. not sure the size i'm usually pumping the pedal while dad bleeds it.

RxDoc08 · 08-31-2012, 11:00 PM

Just got mine on tonight along with the gto reservoir. I got through everything except for bleeding the clutch. I didn't have an 8mm wrench and the socket I had was too shallow. I think I may have to get a cheap set of offset metric wrenches to get it bled. What has everyone else used to open the bleeder for an SS?

AKA · 08-31-2012, 11:59 PM

Have you had anyone say that this didn't help with the grinding. Also how much does it cost.

IDEALG · 09-01-2012, 06:50 AM

Quote:

Originally Posted by RxDoc08

Just got mine on tonight along with the gto reservoir. I got through everything except for bleeding the clutch. I didn't have an 8mm wrench and the socket I had was too shallow. I think I may have to get a cheap set of offset metric wrenches to get it bled. What has everyone else used to open the bleeder for an SS?

hard to get up there with anything other then an 8 mm wrench.

IDEALG · 09-01-2012, 06:52 AM

Quote:

Originally Posted by SteeleRS/SS

Have you had anyone say that this didn't help with the grinding. Also how much does it cost.

no one has complained about my master cylinder. No one has said it didn't stop the grind. PM sent

trclee · 09-02-2012, 08:02 AM

thank you very much for going through the trouble to find a cure for this problem and sharing it with the rest of us. i installed mine last night and the install was rather easy the hardest part for me was bleeding i have very large hands and fat fingers. i told my wife this is the best upgrade to my car so far and i feel i finally have the car i thought i was buying. on my ride home last night it was the first time i was able to really grab a good solid second gear, not to mention the pedal and all other shifts feel much smoother. thanks again

IDEALG · 09-02-2012, 09:17 AM

Quote:

Originally Posted by trclee

thank you very much for going through the trouble to find a cure for this problem and sharing it with the rest of us. i installed mine last night and the install was rather easy the hardest part for me was bleeding i have very large hands and fat fingers. i told my wife this is the best upgrade to my car so far and i feel i finally have the car i thought i was buying. on my ride home last night it was the first time i was able to really grab a good solid second gear, not to mention the pedal and all other shifts feel much smoother. thanks again

Thats what we like to hear. I'm glad these are helping everyone enjoy thier cars!

SGT Stretch · 09-02-2012, 12:04 PM

You guys are gonna make me buy one of these.... i have been thinking for months now that me missing 2nd gear at the strip 3-4 times out of 11-12 passes was all my fault. I think I'll be ordering one soon. What's the price?

IDEALG · 09-02-2012, 12:15 PM

Quote:

Originally Posted by SGT Stretch

You guys are gonna make me buy one of these.... i have been thinking for months now that me missing 2nd gear at the strip 3-4 times out of 11-12 passes was all my fault. I think I'll be ordering one soon. What's the price?

pm sent

trclee · 09-02-2012, 08:06 PM

Quote:

Originally Posted by SGT Stretch

You guys are gonna make me buy one of these.... i have been thinking for months now that me missing 2nd gear at the strip 3-4 times out of 11-12 passes was all my fault. I think I'll be ordering one soon. What's the price?

it really had me questioning my ability to drive as well

View Poll Results: if you definitely want a cylinder please chose V6 or SS. need to figure out how many
I own a V6	20	20.83%
I own a V6 but will wait for a core exchange	7	7.29%
I own a SS	50	52.08%
I own a SS but will wait for a core exchange	21	21.88%
Multiple Choice Poll. Voters: 96. You may not vote on this poll

08-21-2012, 10:33 AM	#702
CyberPredator Drives: TT/SS Join Date: Oct 2010 Location: New Orleans Posts: 520	Just ordered one. __________________

08-21-2012, 11:29 AM	#704
IDEALG "Chevy" rumbles best Drives: 2011 2SS/RS 6 speed Join Date: Feb 2011 Location: fords, nj Posts: 2,547 View My Garage	Cyber- shipped __________________

08-21-2012, 11:34 AM	#705
CyberPredator Drives: TT/SS Join Date: Oct 2010 Location: New Orleans Posts: 520	thanks! __________________

08-24-2012, 01:57 PM	#708
ramsman34 Drives: 2011 Summit White, 2SS/RS-LS3 Join Date: Jul 2010 Location: Valencia, CA Posts: 337 View My Garage	IDealG get TWO THUMBS WAAAY UP FROM ME. There is no greater value here than a vendor you can trust!! Thanks for your advice!!! __________________ 414whp, 403wtq (Mustang Dyno) -Thanks Ray/Full Throttle Kustomz

08-22-2012, 08:43 PM	#706
Burnt_RS Drives: '10 1LT/RS Join Date: Apr 2010 Location: Canada Posts: 599	Just sent payment via paypal. I'm looking forward to getting this installed!

08-24-2012, 11:03 PM	#710
1977and2010 Tampa Gulf Coast Family Drives: 1977 Z28, 2SSRS 2010 M6 Join Date: Sep 2009 Location: Dunedin FL Posts: 722	Finally got to drive mine and really lay into it today. It felt great. The master definitely helped with the notchiness. I never had the grind I hear about, but it sure was hard to get in gear sometimes. Now it just glides in. Smooth like butta. Thanks IdealG. __________________

08-27-2012, 07:41 AM	#712
IDEALG "Chevy" rumbles best Drives: 2011 2SS/RS 6 speed Join Date: Feb 2011 Location: fords, nj Posts: 2,547 View My Garage	all orders from this weekend have shipped, thanks guys. __________________

08-27-2012, 08:38 PM	#713
RxDoc08 Jason Drives: 2011 2SS/RS Join Date: Apr 2011 Location: Richmond, Va Posts: 137	Just ordered mine tonight. Can't wait to get this thing on.

08-31-2012, 01:37 PM	#715
Ventmaster Drives: 2010 Camaro RS 1LT M6 Join Date: Jan 2011 Location: Utah Posts: 1,076	I was hoping someone would know the size the bleeder valve is on the V6 Camaro. I'm thinking 10 or 11mm most likely. Or just give me a good idea where to look, and I'll check it myself. Thanks in advance- __________________ Airaid CAI, Rx ported TB, Mace ported IM, JBA shorty headers, Richmond 3.73, Borla touring axleback, Hurst short throw, NH-SS fix, IDEALG clutch m/c, SS struts/springs, Spohn trailing arms, Pfadt Racing sways, Pedders radius arm & rear subframe bushing inserts, 2LT gauge pkg.TSW Nurburgs. IPF S/C

08-31-2012, 11:00 PM	#717
RxDoc08 Jason Drives: 2011 2SS/RS Join Date: Apr 2011 Location: Richmond, Va Posts: 137	Just got mine on tonight along with the gto reservoir. I got through everything except for bleeding the clutch. I didn't have an 8mm wrench and the socket I had was too shallow. I think I may have to get a cheap set of offset metric wrenches to get it bled. What has everyone else used to open the bleeder for an SS?

08-31-2012, 11:59 PM	#718
AKA Go SteeleRS/SS Drives: '11 SS/RS LS3, yellow 1LE asap Join Date: Aug 2011 Location: Pittsburgh, PA Posts: 300	Have you had anyone say that this didn't help with the grinding. Also how much does it cost.

09-02-2012, 08:02 AM	#721
trclee Drives: 2011 ss m6 Join Date: Jul 2011 Location: chattanooga tn Posts: 23 View My Garage	thank you very much for going through the trouble to find a cure for this problem and sharing it with the rest of us. i installed mine last night and the install was rather easy the hardest part for me was bleeding i have very large hands and fat fingers. i told my wife this is the best upgrade to my car so far and i feel i finally have the car i thought i was buying. on my ride home last night it was the first time i was able to really grab a good solid second gear, not to mention the pedal and all other shifts feel much smoother. thanks again

09-02-2012, 12:04 PM	#723
SGT Stretch Drives: 2011 SS/RS Camaro Silver Ice Join Date: Jun 2011 Location: Abilene TX Posts: 485	You guys are gonna make me buy one of these.... i have been thinking for months now that me missing 2nd gear at the strip 3-4 times out of 11-12 passes was all my fault. I think I'll be ordering one soon. What's the price?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Rear End Gears 101	danhr	V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6)	63	12-26-2012 11:02 AM
GTO Clutch Reservoir Install	terry_b	Camaro DIY & HOW-TO instructions & discussions	56	12-13-2012 02:50 PM
V6 AY6 M6 2nd Gear Problem - Report Your Issue Here	CAMAR0	V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6)	1606	10-25-2012 03:18 PM
2nd gear grind issue and updated GM parts (pics)	Oxtar41	V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6)	51	01-10-2012 08:43 PM
Street Slayer brought to you by Hendrix Engineering	Hendrix-Engineering	Transmission / Driveline	2	12-08-2011 02:55 PM