Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Emblempros
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Marketplace > Sponsors Classifieds Marketplace > Suspension / Chassis / Brakes

Suspension / Chassis / Brakes Suspension, chassis, and brake components

View our official forum sponsors list.

Reply
 
Thread Tools
Old 06-25-2014, 02:22 PM   #1
ModBargains.com


 
ModBargains.com's Avatar
 
Drives: Camaro, 996TT, 335i, Etc.
Join Date: Feb 2012
Location: 1721 E. Lambert Rd. Unit C, La Habra, Ca 90631
Posts: 1,999
Talking ModBargains.com | Strut Tower Braces from BMR Suspension! Lots to choose from!




Hey guys! Today we're going to go over the selection of Strut Tower Braces from BMR Suspension! There four options for the V8 (L99/LS3) cars, ones for supercharged and non-supercharged applications to provide more clearance, and a V6 option as well. Take a look and if you have any questions, feel free to ask!


BMR Suspension 2-Point Strut Tower Brace 2010-11 Camaro V8



Features:
- Tightens Front End Handling by increasing Chassis Rigidity
- Easy Bolt-On Installation Using Factory Bolt Holes
- Maximum Clearance Allows Easy Engine Cover Removal


The fifth generation of Chevrolet's F-body platform is GM's most rigid platform to date, but it could still be improved upon. Strut towers are subject to more load than most Drivers realize, and even just normal everyday driving can deflect the towers a measurable amount! Help alleviate the chassis flex problems that keep your 5th Gen from being the best it can be with this 2-point strut tower brace.

Aggressive driving - and especially track-day driving conditions can move the towers around enough to create erratic handling inconsistencies out on the track and cause temporary alignment drift. Most of this load is directed inward as the strut/spring compresses and attempts to close the distance between the two towers, so bracing to tie the towers together helps cancel out the deflection.

BMR's front Strut Tower Brace reinforces the front end by tying the two strut towers together, effectively canceling tower deflection.

BMR's Strut Tower Brace is manufactured from large diameter 1.75" x .120" tubing with heavy duty 1/4" thick mounting plates. Our braces mount directly to the top of the strut towers at the highest leverage point for the greatest amount of stability. The upper strut retainer is replaced with BMR's billet aluminum, high clearance retainer.

This BMR Suspension upgrade is available in your choice of red powdercoat or black hammertone finish.

Note: While this system is designed for Naturally Aspirated Camaro models, this BMR Strut Tower Brace is compatible with an Edelbrock E-Force Supercharger or similar.




BMR Suspension 2-Point Strut Tower Brace 2011-14 Camaro V8


Features:
- Tightens Front End Handling by increasing Chassis Rigidity
- Easy Bolt-On Installation Using Factory Bolt Holes
- Maximum Clearance Allows Easy Engine Cover Removal


Eliminate strut tower flex with a strut tower brace from BMR Suspension. Factory strut towers have no support between them, allowing them to flex under hard cornering. Additionally, driving over off-camber transitions and other road irregularities can cause the strut towers to distort, reducing front end stability. The BMR Strut Tower Brace ties the two strut towers together, reducing this flex and maximizing front end stability control.

Manufactured from a combination of 1.25" and 1" seamless tubing and 1/4" mounting plates. Finished in black hammertone or red powdercoat.

This BMR Suspension upgrade is available in your choice of red powdercoat or black hammertone finish.

Note: While this system is designed for Naturally Aspirated Camaro models, this BMR Strut Tower Brace is compatible with an Edelbrock E-Force Supercharger or similar.




BMR Suspension 4-Point Strut Tower Brace 2010-11 Camaro V6 & V8



Features:
- Tightens Front End Handling by increasing Chassis Rigidity
- Billet Aluminum Strut Retainers Replace OEM Steel Parts for Enhanced Appearance
- High Clearance Allows Easy Engine Cover Removal


Minimize strut tower deflection in your 5th Gen Camaro with this high quality 4-Point Strut Tower Brace from BMR Suspension. Manufactured utilizing a combination of 1.25” and 1” heavy wall DOM tubing, this brace maintains front end stability by canceling out strut tower deflection. The BMR 4-Point Strut Tower Brace (STB016) mounts directly to the top and front of the strut towers at the highest leverage point for the greatest amount of stability. This high clearance design fits both V6 and V8 models and permits engine cover removal. Billet aluminum strut retainers replace the OE stamped steel parts for an improved look as well. Installation time is only 3 hours. Available in black hammertone or red powdercoat.

This BMR Suspension upgrade is available in your choice of red powdercoat or black hammertone finish.

Note: While this system is designed for Naturally Aspirated Camaro models, this BMR Strut Tower Brace is compatible with an Edelbrock E-Force Supercharger or similar.




BMR Suspension 4-Point Strut Tower Brace 2010-11 Camaro V8


The fifth generation of Chevrolet's F-body platform is GM's most rigid platform to date, but that doesn't mean it can't be improved! Strut towers are subject to more load than most folks realize, and even normal everyday driving can deflect the towers a measurable amount!

Aggressive driving and especially track-day duty can move the towers around enough under load to create erratic handling inconsistencies and temporary alignment drift. Most of this load is directed inward as the strut/spring compresses and attempts to close the distance between the two towers. BMR's front Strut Tower Brace reinforces the front end by tying the two strut towers together, effectively canceling tower deflection. BMR's Strut Tower Brace is manufactured from large diameter 1.75" x .120" tubing with heavy duty 1/4" thick mounting plates. Our braces mount directly to the top of the strut towers at the highest leverage point for the greatest amount of stability. The upper strut retainer is replaced with BMR's billet aluminum, high clearance retainer. BMR's 4 point Strut Tower Brace goes a step further by tying the front fenders and core support together with the strut towers. The 4 point links are made from 1" DOM tubing and use heavy duty 1" clevises and QA1 rod ends.

This BMR Suspension upgrade is available in your choice of red powdercoat or gunmetal hammertone finish

IMPORTANT: Does not fit V6's. Does not clear Suncoast Creations Ram Air hoods. Does not fit Supercharged Camaros.



If you have any questions, please dont' hesitate to ask or PM/Email or call me at 714.582.3330 extension 8002 or ask for Jurrian!

__________________

We Specialize In: Camaro Wheels |Camaro Suspension | Camaro Performance | Camaro Exhaust | Camaro Intakes | Forgestar Wheels
Modification Expert - Jurrian Terpstra
| Jurrian@ModBargains.com | (714) 582-3330 ext. 8002 Subscribe to our BLOG to get updates and bargains of the week!
ModBargains.com is offline   Reply With Quote
Old 06-30-2014, 11:33 AM   #2
ModBargains.com


 
ModBargains.com's Avatar
 
Drives: Camaro, 996TT, 335i, Etc.
Join Date: Feb 2012
Location: 1721 E. Lambert Rd. Unit C, La Habra, Ca 90631
Posts: 1,999
Hope you had a great weekend guys! Let me know if there's anything I can do to help!
__________________

We Specialize In: Camaro Wheels |Camaro Suspension | Camaro Performance | Camaro Exhaust | Camaro Intakes | Forgestar Wheels
Modification Expert - Jurrian Terpstra
| Jurrian@ModBargains.com | (714) 582-3330 ext. 8002 Subscribe to our BLOG to get updates and bargains of the week!
ModBargains.com is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:52 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.