Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Hurst Shifters
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Marketplace > Sponsors Classifieds Marketplace > Suspension / Chassis / Brakes

Suspension / Chassis / Brakes Suspension, chassis, and brake components

View our official forum sponsors list.

Reply
 
Thread Tools
Old 01-02-2015, 05:51 PM   #1
JDP Tyler

 
JDP Tyler's Avatar
 
Drives: Chevys at the limit
Join Date: Nov 2010
Location: SLC, UT
Posts: 7,600
Arrow FE4 Suspension Conversion Packages! | 10-11 Camaros MUST HAVE! | JDP Motorsports

Hi Camaro5!

As many of you know, The 2010-2011 SS Coupe and 2010-2015 V6/SS Convertible used an inboard style rear sway bar that has endlink pick up points very close to the pivot points of the lower control arms. This design was very problematic and inefficient, causing the end links tabs on the rear lower control arms to tear through. This caused the OEM end links to deflect and break when stiffer sway bars were introduced. In 2012 GM recognized this short coming and implemented the FE4 designation. GM changed the design of the SS’s (minus convertible) to the style used on the ZL1/1LE that have outboard pickup points closer to the spindle and beefed up the front end links. The FE4 design is a much more fluid, effective and reliable setup that will increase performance without worry of issues or noise for years to come.

To take the guess work out of the FE4 conversion, JDP Motorsports has put together a package complete with everything needed to update your FE2/FE3 suspension to the newer style! All you'll need is this package along the FE4 style sway bars of your choice! (Sway bar options below)

JDP Motorsports - GM FE4 Conversion Package - 2010-2011 Camaro V6/Camaro SS - Part # JDPS1005

GM FE4 Conversion Package Includes
  • GM FE4 rear lower control arms
  • GM FE4 rear endlinks
  • GM FE4 front endlinks
  • GM FE4 front endlink nuts
  • Free Shipping to the Lower 48!
Note - The end link mounting points on the front struts will have to be opened up from 10mm to 12mm to accommodate the larger end link studs. This can easily be done with a 12mm drill bit. (Be careful not to over enlarge the holes)
Note - 2010-11 V6 and SS Convertibles require the full FE4 conversion kit while the 2012+ only require only the rear endlinks part # 22761221 and FE4 style sway bars.
Note - 2010-15 V6 models require a Camaro SS/ZL1 rear Brembo caliper conversion

FE4 Sway bar options

BMR Part # SB039
Detroit speed Part # 031412/042215

If you have any questions, please feel free to call, PM or email us anytime! Here at JDP, we install, use and test every part we offer. This means we have the hands on knowledge required to help get you setup with the right parts the first time, without all the guess work!

Best regards,

Tyler
888-308-6007
__________________

Click HERE to send me a PM | Sales@jdpmotorsports.com | www.jdpmotorsports.com | Facebook | 888.308.6007

Last edited by JDP Tyler; 01-02-2015 at 07:39 PM.
JDP Tyler is offline   Reply With Quote
Old 01-02-2015, 11:45 PM   #2
hammdo

 
hammdo's Avatar
 
Drives: [COTW 2/09/15] '11 L99 LSA SC Z/LE
Join Date: May 2014
Location: Dallas TX
Posts: 1,656
+1. I did this and love it. Tyler hooked me up...

-Don
hammdo is online now   Reply With Quote
Old 01-12-2015, 07:58 PM   #3
JDP Tyler

 
JDP Tyler's Avatar
 
Drives: Chevys at the limit
Join Date: Nov 2010
Location: SLC, UT
Posts: 7,600
Quote:
Originally Posted by hammdo
+1. I did this and love it. Tyler hooked me up...

-Don
Thanks for the support, as always, Don!

Best regards,

Tyler
888-308-6007
__________________

Click HERE to send me a PM | Sales@jdpmotorsports.com | www.jdpmotorsports.com | Facebook | 888.308.6007
JDP Tyler is offline   Reply With Quote
Old 02-11-2015, 02:38 PM   #4
JDP Tyler

 
JDP Tyler's Avatar
 
Drives: Chevys at the limit
Join Date: Nov 2010
Location: SLC, UT
Posts: 7,600
In stock, ready to ship!

Feel free to call, PM or email me anytime with questions!

Best regards,

Tyler
888-308-6007
__________________

Click HERE to send me a PM | Sales@jdpmotorsports.com | www.jdpmotorsports.com | Facebook | 888.308.6007
JDP Tyler is offline   Reply With Quote
Old 02-13-2015, 04:40 PM   #5
LS3goyo
 
LS3goyo's Avatar
 
Drives: '10 2SS/RS
Join Date: Jun 2014
Location: La Puente
Posts: 138
can you pm me a price with bmr sway bars please. Thanks
LS3goyo is offline   Reply With Quote
Old 02-18-2015, 07:54 PM   #6
JDP Tyler

 
JDP Tyler's Avatar
 
Drives: Chevys at the limit
Join Date: Nov 2010
Location: SLC, UT
Posts: 7,600
All PM's and emails have been replied to! Thanks for the orders and let me know if you have any questions!

Best regards,

Tyler
888-308-6007
__________________

Click HERE to send me a PM | Sales@jdpmotorsports.com | www.jdpmotorsports.com | Facebook | 888.308.6007
JDP Tyler is offline   Reply With Quote
 
Reply

Tags
best price, fe4 conversion, fe4 sway bars, jdp motorsports, suspension update

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:10 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2015, vBulletin Solutions, Inc.