where to find - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

TonyC · 04-08-2012, 08:26 AM

i pulled some stuff apart on my ls3 and i figured since the balancer was off i should pin it when i reinstall...where can i find the pin kit...i am using an arp bolt so i dont need a new bolt just the pin kit.any ideas, i am also looking for an installing tool...i put the car in forth gear and am literally giving it all i can and i cant get it the last 1/8 of an inch or so...i have a balancer install kit but the snout of the tool hits the balancer and i cant thread in the center...i looked everywhere for m16x20 rod and nobody around here has anything....so i figured id buy a tool...any ideas?

i am not supercharged and might be in the future if i swap my cam...i wanna pin the crank for piece of mind..

TonyC · 04-08-2012, 09:58 AM

thats the pin kit for the front of the crank stub? where can i find that install tool?

04-08-2012, 08:26 AM	#1
TonyC Drives: 2010 2SS/RS Join Date: Mar 2012 Location: New York Posts: 170 View My Garage	where to find i pulled some stuff apart on my ls3 and i figured since the balancer was off i should pin it when i reinstall...where can i find the pin kit...i am using an arp bolt so i dont need a new bolt just the pin kit.any ideas, i am also looking for an installing tool...i put the car in forth gear and am literally giving it all i can and i cant get it the last 1/8 of an inch or so...i have a balancer install kit but the snout of the tool hits the balancer and i cant thread in the center...i looked everywhere for m16x20 rod and nobody around here has anything....so i figured id buy a tool...any ideas? i am not supercharged and might be in the future if i swap my cam...i wanna pin the crank for piece of mind.. __________________ 2010 camaro 2ss/rs Afe intake,Ported heads,ported manifold &TB,Big Cam, Arh longtubes w/3",25% underdrive,aluminum flywheel,zr1 clutch, tranzilla 6060, gforce 9" strac 430s...worst tune in the world...dc power 300amp alt, audison/kenwwod/cdt system.pfadt/eibach/hotchkis/bmr susp...vented/drilled rotors, hawk pads,s/s lines work in progress : Full electric power steering & Airride

04-08-2012, 09:58 AM	#2
TonyC Drives: 2010 2SS/RS Join Date: Mar 2012 Location: New York Posts: 170 View My Garage	thats the pin kit for the front of the crank stub? where can i find that install tool? __________________ 2010 camaro 2ss/rs Afe intake,Ported heads,ported manifold &TB,Big Cam, Arh longtubes w/3",25% underdrive,aluminum flywheel,zr1 clutch, tranzilla 6060, gforce 9" strac 430s...worst tune in the world...dc power 300amp alt, audison/kenwwod/cdt system.pfadt/eibach/hotchkis/bmr susp...vented/drilled rotors, hawk pads,s/s lines work in progress : Full electric power steering & Airride

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Looking For Tire & Wheel Vendors To Help Customers Find Your Products For Sale...	Black LS3	Wheels / Tires	2	04-22-2010 11:50 PM
Where can I find something like this?	ZZcamaro	5th Gen Camaro SS LS LT General Discussions	10	04-09-2010 11:49 PM
Can't find a freaking stock exhaust	irvinecamaro	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	16	02-06-2010 09:27 PM
Help me find a beater	diddiyo	Off-topic Discussions	12	01-22-2009 06:35 PM