front fascia and gill clear cote chips - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

jshaf · 04-12-2012, 07:21 PM

what do you do for the fine chips in the front fascia and side gill chips? there not deep enough to fill with something like Dr color chip and I am not sure if I should use polish and try to buff them out some. can you put a small amount of clear on them and polish them to blend in better?? not sure how to approach them when I do my spring detail! what does everyone else do for this problem?

jshaf · 04-14-2012, 08:43 AM

thanks for all the feed back...LOL

Dznts · 04-14-2012, 11:18 AM

Langka Paint System, or Dr. Colorchip. Those are the cheapest ways to cover the chips.

jshaf · 04-14-2012, 08:49 PM

thing is most are not deep enough, there just in the clear. not sure the langka or dr colorchip would work in my case. will probably just touch up the more noticable or deeper ones and polish the rest out a bit.

04-12-2012, 07:21 PM	#1
jshaf Drives: 2010 Silver Ice Metallic LT Join Date: Feb 2010 Location: Masontown, WV Posts: 2,425	front fascia and gill clear cote chips what do you do for the fine chips in the front fascia and side gill chips? there not deep enough to fill with something like Dr color chip and I am not sure if I should use polish and try to buff them out some. can you put a small amount of clear on them and polish them to blend in better?? not sure how to approach them when I do my spring detail! what does everyone else do for this problem? __________________ Vararam Intake, MRT V1, Helmholtz Chambers,35% tint, 20" Polished OEM Rims, 6.5 Polk Components(Doors), Alpine 710W amp, 10" Alpine Sub, Custom Leather Seats, Etc. Build #14619(06-03-2009)

04-14-2012, 08:43 AM	#2
jshaf Drives: 2010 Silver Ice Metallic LT Join Date: Feb 2010 Location: Masontown, WV Posts: 2,425	thanks for all the feed back...LOL __________________ Vararam Intake, MRT V1, Helmholtz Chambers,35% tint, 20" Polished OEM Rims, 6.5 Polk Components(Doors), Alpine 710W amp, 10" Alpine Sub, Custom Leather Seats, Etc. Build #14619(06-03-2009)

04-14-2012, 11:18 AM	#3
Dznts Anabolic Connoisseur Drives: 2012 Camaro 2SS/RS LS3 - 2007 Tahoe Join Date: Sep 2010 Location: Oklahoma Posts: 18,017	Langka Paint System, or Dr. Colorchip. Those are the cheapest ways to cover the chips. __________________

04-14-2012, 08:49 PM	#4
jshaf Drives: 2010 Silver Ice Metallic LT Join Date: Feb 2010 Location: Masontown, WV Posts: 2,425	thing is most are not deep enough, there just in the clear. not sure the langka or dr colorchip would work in my case. will probably just touch up the more noticable or deeper ones and polish the rest out a bit. __________________ Vararam Intake, MRT V1, Helmholtz Chambers,35% tint, 20" Polished OEM Rims, 6.5 Polk Components(Doors), Alpine 710W amp, 10" Alpine Sub, Custom Leather Seats, Etc. Build #14619(06-03-2009)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Good Lord, these paint chips are KILLING me! GM please change your ways!	bumblebeecamaro	5th Gen Camaro SS LS LT General Discussions	73	05-27-2010 10:52 AM