Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Vector Motorsports
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Technical Camaro Topics > Camaro DIY & HOW-TO instructions & discussions

Camaro DIY & HOW-TO instructions & discussions All DIY projects & discussions

Reply
 
Thread Tools
Old 07-22-2014, 09:02 PM   #1
mikerogs
 
mikerogs's Avatar
 
Drives: Black 2SS
Join Date: Apr 2011
Location: Lansing, Illinois
Posts: 90
dropped something inside door...help

A laminated flyer fell inside the door. It was sitting on the window and when the door was opened, because of the "window indexing" feature, it slid inside the door. I took off the door panel, but alas, not there. It is not in between the door and the panel, it is in the door I guess. Is there a vid or a write up or anything that can help me figure out how to get inside the door? I see lots of write ups on how to remove the door panel, but that does me no good. Maybe I should just forget it?

thanks
__________________
mikerogs is offline   Reply With Quote
Old 07-22-2014, 10:08 PM   #2
sjmautoprod


 
sjmautoprod's Avatar
 
Drives: '10 1LT
Join Date: Apr 2011
Location: Chicago Suburbs
Posts: 1,957
I think you'll need to peel back a section of that black membrane. I bet it covers lots of holes.

__________________

sjmap.usinfo@sjmap.usGoogle+FacebookIRC Chat
Online ordering now available!
sjmautoprod is offline   Reply With Quote
Old 07-22-2014, 10:27 PM   #3
Baer383
 
Baer383's Avatar
 
Drives: 2013 ZL1 Ashen Gray
Join Date: Oct 2013
Location: Lawrenceville,Ga
Posts: 599
Quote:
Originally Posted by sjmautoprod View Post
I think you'll need to peel back a section of that black membrane. I bet it covers lots of holes.

There are a lot of access holes,the black membrane is a water barrier.
__________________
I don't have to know everything,I just need to know,what I need to know,when I need to know it!

MODS, a lot of money,a lot of parts,a lot of time,a lot of patience.

754 RWHP 747 RWTQ 93 Octane


http://www.camaro5.com/forums/showthread.php?t=347243
Baer383 is offline   Reply With Quote
Old 07-23-2014, 12:22 AM   #4
mikerogs
 
mikerogs's Avatar
 
Drives: Black 2SS
Join Date: Apr 2011
Location: Lansing, Illinois
Posts: 90
Yep I was at that stage but I wasn't sure if that membrane would reseal itself after it was pulled away? Does anyone know? I have no idea what that is but it looks and acts like glue. I would hate to pull it off and then realize it won't go back on.
__________________
mikerogs is offline   Reply With Quote
Old 07-23-2014, 03:42 PM   #5
13blackLS
 
13blackLS's Avatar
 
Drives: 2013 camaro ls; 2005 rx8
Join Date: Mar 2013
Location: Houston
Posts: 400
Can you remove the speaker and reach through there? May keep from having to peel the that away and worrying about it not sticking again? Other cars ive worked on it stuck back on..but cant say about camaro since ive never done it...
13blackLS is offline   Reply With Quote
Old 07-23-2014, 09:40 PM   #6
FrankieBee
 
Drives: 2010 Camaro 2LT
Join Date: Jul 2013
Location: Flushing NY
Posts: 114
Quote:
Originally Posted by mikerogs View Post
Yep I was at that stage but I wasn't sure if that membrane would reseal itself after it was pulled away? Does anyone know? I have no idea what that is but it looks and acts like glue. I would hate to pull it off and then realize it won't go back on.

You can pull membrane off and it will stick back on. You can also remove the 1 screw holding speaker and access thru speaker hole.
FrankieBee is offline   Reply With Quote
Old 07-23-2014, 10:12 PM   #7
mikerogs
 
mikerogs's Avatar
 
Drives: Black 2SS
Join Date: Apr 2011
Location: Lansing, Illinois
Posts: 90
Thanks everyone, I did decide to just peel that membrane back and it seems to be sticking back in place again. Feel stupid for asking a dopey question like this but I just wasn't sure.
__________________
mikerogs is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:35 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.