![]() |
|
|
|||||||
| Homepage | Garage | Wiki | Register | Members List | Social Groups | Calendar | Search | Today's Posts | Mark Forums Read |
| Audio, Video, Bluetooth, Navigation, Radar, Electronics Forum All audio, video, bluetooth, nav, radar, and electronics discussions. |
![]() |
|
|
Thread Tools |
|
|
#1 |
![]() |
Question for Camaro Hertz speaker owners
Im using HSK165 in the doors, using Pheonix gold sub/6ch amp pkg and having a hard time deciding on rear speakers. Are you running same as front? Stock?(mine are BA), or maybe go with HSK165xl in rear? Or go 6x9's. Thoughts?? Please only respond if u have Hertz as i wont put other brand back there.
Thanks
__________________
Vmax TBody, CAI w/scoop, Solo HFC, Magnaflow TruX, Dynomax VT, Trifecta Tune, BMR Springs and Sways, Phoenix Gold Package, Hertz speakers, and SS rear with 3.73 gears w/JRE clutches and BMR bushings
|
|
|
|
|
|
#2 |
![]() Drives: 2010 Camaro 1SS/RS #21068 Join Date: Apr 2009
Location: Benton, Arkansas
Posts: 87
|
Just use a set of ECX690 (Energy series 6x9) if you want to upgrade from your stock BA. They run about $200/pr and will do fine plus be easy to install. You don't need much rear anyway. Focus on the front. This is unless you want to get trick and relocate a second pair of 6 1/2" coax drivers to the side wall rear panels. This option works WAY better but is a little involved.
__________________
Todd
TCAudio Benton, Arkansas 31 World Championships (1990-2012) ![]() www.tcaudio.net TC Audio on Facebook |
|
|
|
![]() |
| Thread Tools | |
|
|