(UPDATED) Stainless Works exhaust and header systems!! (Tag's SS w/ HP #'s) - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

*Milk 1027* · 05-18-2009, 10:14 PM

Exhaust systems and headers from Stainless Works.

UPDATE with dyno results posted in post 101.

UPDATED PERFORMANCE #'S

Stock:
416hp and 349tq @ 6259rpm
(torque was greatest at 4609rpm w/ 402tq)

w/ Catback:
423hp and 355tq @ 6255rpm
(torque was greatest at 4605rpm @ 407tq)

PEAK HP w/ HEADERS AND ALL:
440hp and 377tq @ 6123rpm
(torque was greatest at 4673rpm at 417tq)

Headers:
Stainless Works A.:
304 SS headers with CNC mandrel bent 2" primaries and 3" slip fit collectors - headers only
http://www.stainlessworks.net/cart/p...oducts_id=1798
$990

Stainless Works B.:
304 SS headers with CNC mandrel bent 1-7/8" primaries and 3" slip fit collectors - headers only
http://www.stainlessworks.net/cart/p...oducts_id=1815
$990

Stainless Works C.:
304 SS headers with CNC mandrel bent 2" primaries and 3" slip fit collectors with high flow metal matrix catalytic converters and 3" lead pipes to fit Stainless Works Exhaust System.
http://www.stainlessworks.net/cart/p...oducts_id=1799
$1,450

Stainless Works D.:
304 SS headers with CNC mandrel bent 1-7/8" primaries and 3" slip fit collectors with high flow metal matrix catalytic converters and 3" lead pipes to fit to Stainless Works Exhaust System
http://www.stainlessworks.net/cart/p...oducts_id=1816
$1,450

Stainless Works E.:
304 SS headers with CNC mandrel bent 2" primaries and 3" slip fit collectors with 3" off road lead pipes to fit Stainless Works Exhaust System.
http://www.stainlessworks.net/cart/p...oducts_id=1800
$1,220

Stainless Works F.:
304 SS headers with CNC mandrel bent 1-7/8" primaries and 3" slip fit collectors with 3" off road lead pipes to fit Stainless Works Exhaust System.
http://www.stainlessworks.net/cart/p...oducts_id=1817
$1,220

Exhaust:
Stainless Works exhaust system G.:
304 SS CNC mandrel bent 3" dual exhaust system with x-pipe, dual s-tube turbo mufflers, mirror polished stainless steel tips, and all hangers and clamps for easy installation. Fits factory connection point.
http://www.stainlessworks.net/cart/p...oducts_id=1801
$1,190

Stainless Works exhaust system H.:
304 SS CNC mandrel bent 3" dual exhaust system with x-pipe, dual chambered turbo mufflers, mirror polished stainless steel tips, and all hangers and clamps for easy installation. Fits Stainless Works Headers.
http://www.stainlessworks.net/cart/p...oducts_id=1802
$1,190

All this now included in the performance thread
http://www.camaro5.com/forums/showthread.php?t=14723

and in the Wiki page, aftermarket section in my signature.

*Mindz* · 05-18-2009, 10:31 PM

looking snazzy all organized and such. Great job Milk!

blackedout010 · 05-18-2009, 10:45 PM

cant wait to see and hear them in action

Gentry78 · 05-19-2009, 01:33 AM

cool

2010SSRSM6 · 05-19-2009, 02:09 AM

Over $2k for a full exhaust system................Yikes.

*Milk 1027* · 05-19-2009, 02:13 AM

Quote:

Originally Posted by 2010SSRSM6

Over $2k for a full exhaust system................Yikes.

about the cheapest one we've seen so far.

JJ2010 · 05-19-2009, 02:52 PM

I don't know how to put the link on here but there is 3 or 4 videos of stainless works exhaust on youtube that is unbelievable....If someone can do a search for 2010 camaro and check uploaded today you will beable to see it.It is awesome..........

bobby35ny · 05-19-2009, 02:55 PM

Hey MILK, Do they have any dyno numbers and sound clips coming?

-bobby

JJ2010 · 05-19-2009, 03:01 PM

Quote:

Originally Posted by bobby35ny

Hey MILK, Do they have any dyno numbers and sound clips coming?

-bobby

Look on youtube......

*Milk 1027* · 05-19-2009, 03:04 PM

i just saw the videos. But I'm in a hurry.

I'll get them up ASAP. when I get back

*radz28* · 05-19-2009, 03:16 PM

Grrr... I wish I could run LTs more and more now

Camarofan123 · 05-19-2009, 03:18 PM

I'm not really fond of the sound, maybe it would sound better with a different muffler.

Nicky · 05-19-2009, 03:19 PM

WOW this sounds mean as hell!!!!

garagelogic · 05-19-2009, 03:20 PM

I've ran SW's stuff on several cars in the past and it's all been top-notch stuff. Fit and finish has been spot on in all cases. it may seem high, but it is well worth the price.

Camarofan123 · 05-19-2009, 03:20 PM

Look at the other 3 videos I posted.

*radz28* · 05-19-2009, 03:21 PM

OH YEAH!!! THAT'S WHAT I'M TALKIN' ABOUT!!!

Thanks

69 Hugger · 05-19-2009, 03:27 PM

Nice did he chirp forth ? I think thats the one for me.

UsedTaHaveA68 · 05-19-2009, 03:28 PM

Jesus, that thing sounds like war!

*Milk 1027* · 05-19-2009, 03:50 PM

updated op with videos.

*radz28* · 05-19-2009, 03:51 PM

Quote:

Originally Posted by UsedTaHaveA68

Jesus, that thing sounds like war!

I can't relate but if I were to make a car exhaust sound like war, I think you'd be right, LOL! It sounds bad@$$.

GMtothecore · 05-19-2009, 03:56 PM

Scarrrrrry!

logan1080 · 05-19-2009, 03:57 PM

Do you guys think that 3" pipes are to big for a N/A engine? Enough back pressure? And which headers size for a N/A engine? 1 7/8?

bobby35ny · 05-19-2009, 03:57 PM

Man, thats LOUD!!
What mufflers are they using?

-bobby

Tactical Z · 05-19-2009, 04:03 PM

That sounds amazing.

*Camaro_Corvette* · 05-19-2009, 04:04 PM

Perfect! Thats the sound I have been looking for!

05-18-2009, 10:14 PM	#1
Milk 1027 Camaro➎ moderator Drives: 2010 1SS/RS IBM Join Date: Aug 2008 Location: AZ Posts: 13,306 View My Garage	(UPDATED) Stainless Works exhaust and header systems!! (Tag's SS w/ HP #'s) Exhaust systems and headers from Stainless Works. UPDATE with dyno results posted in post 101. UPDATED PERFORMANCE #'S Stock: 416hp and 349tq @ 6259rpm (torque was greatest at 4609rpm w/ 402tq) w/ Catback: 423hp and 355tq @ 6255rpm (torque was greatest at 4605rpm @ 407tq) PEAK HP w/ HEADERS AND ALL: 440hp and 377tq @ 6123rpm (torque was greatest at 4673rpm at 417tq) Headers: Stainless Works A.: 304 SS headers with CNC mandrel bent 2" primaries and 3" slip fit collectors - headers only http://www.stainlessworks.net/cart/p...oducts_id=1798 $990 Stainless Works B.: 304 SS headers with CNC mandrel bent 1-7/8" primaries and 3" slip fit collectors - headers only http://www.stainlessworks.net/cart/p...oducts_id=1815 $990 Stainless Works C.: 304 SS headers with CNC mandrel bent 2" primaries and 3" slip fit collectors with high flow metal matrix catalytic converters and 3" lead pipes to fit Stainless Works Exhaust System. http://www.stainlessworks.net/cart/p...oducts_id=1799 $1,450 Stainless Works D.: 304 SS headers with CNC mandrel bent 1-7/8" primaries and 3" slip fit collectors with high flow metal matrix catalytic converters and 3" lead pipes to fit to Stainless Works Exhaust System http://www.stainlessworks.net/cart/p...oducts_id=1816 $1,450 Stainless Works E.: 304 SS headers with CNC mandrel bent 2" primaries and 3" slip fit collectors with 3" off road lead pipes to fit Stainless Works Exhaust System. http://www.stainlessworks.net/cart/p...oducts_id=1800 $1,220 Stainless Works F.: 304 SS headers with CNC mandrel bent 1-7/8" primaries and 3" slip fit collectors with 3" off road lead pipes to fit Stainless Works Exhaust System. http://www.stainlessworks.net/cart/p...oducts_id=1817 $1,220 Exhaust: Stainless Works exhaust system G.: 304 SS CNC mandrel bent 3" dual exhaust system with x-pipe, dual s-tube turbo mufflers, mirror polished stainless steel tips, and all hangers and clamps for easy installation. Fits factory connection point. http://www.stainlessworks.net/cart/p...oducts_id=1801 $1,190 Stainless Works exhaust system H.: 304 SS CNC mandrel bent 3" dual exhaust system with x-pipe, dual chambered turbo mufflers, mirror polished stainless steel tips, and all hangers and clamps for easy installation. Fits Stainless Works Headers. http://www.stainlessworks.net/cart/p...oducts_id=1802 $1,190 All this now included in the performance thread http://www.camaro5.com/forums/showthread.php?t=14723 and in the Wiki page, aftermarket section in my signature. __________________

05-18-2009, 10:31 PM	#2
Mindz E.B.A.H. Drives: you wild... Join Date: Mar 2007 Location: In the happy padded room wearing a jacket that makes me hug myself... Posts: 16,494	looking snazzy all organized and such. Great job Milk! __________________ "J, you're my favorite Pokemod" ~Revo1

05-19-2009, 02:09 AM	#5
2010SSRSM6 SoCal C5 Family Member Drives: My wife crazy with my C5 usage. Join Date: Apr 2009 Location: SoCal Posts: 5,175 View My Garage	Over $2k for a full exhaust system................Yikes. __________________ Powered by Cunningham MotorSports

05-19-2009, 02:55 PM	#8
bobby35ny Drives: 2010 2SS/RS M6 R6P Join Date: Nov 2008 Location: South East, FL Posts: 1,535	Hey MILK, Do they have any dyno numbers and sound clips coming? -bobby __________________ Gone 12.28.12 Lets see if and when a Z-28 gets done. J-E-T-S JETS JETS JETS

05-19-2009, 03:04 PM	#10
Milk 1027 Camaro➎ moderator Drives: 2010 1SS/RS IBM Join Date: Aug 2008 Location: AZ Posts: 13,306 View My Garage	i just saw the videos. But I'm in a hurry. I'll get them up ASAP. when I get back __________________

05-18-2009, 10:45 PM	#3
blackedout010 Drives: on order black 2010 2ss Join Date: Mar 2009 Location: north carolina Posts: 652	cant wait to see and hear them in action

05-19-2009, 01:33 AM	#4
Gentry78 HOOK'EM Drives: 97 c1500/92 olds Join Date: Oct 2008 Location: Texas Posts: 5,284	cool

05-19-2009, 02:52 PM	#7
JJ2010 Drives: 2010 Camaro SS Join Date: Oct 2008 Location: Smithfield,NC Posts: 1,229	I don't know how to put the link on here but there is 3 or 4 videos of stainless works exhaust on youtube that is unbelievable....If someone can do a search for 2010 camaro and check uploaded today you will beable to see it.It is awesome..........

05-19-2009, 03:16 PM	#11
radz28 Petro-sexual Drives: Ultra-Grin Join Date: Oct 2006 Location: Crapramento, Crapifornia Posts: 12,949 View My Garage	Grrr... I wish I could run LTs more and more now __________________ "...What IS true: We anticipated that this would happen - we are never finished - and yes, Ford DOES deserve to win now and then. To think that GM can come out with a car to make ford throw in the towel is simply foolhardy..." - fbodfather

05-19-2009, 03:18 PM	#12
Camarofan123 Drives: None Join Date: Mar 2009 Location: Texas Posts: 110	I'm not really fond of the sound, maybe it would sound better with a different muffler. Last edited by Camarofan123; 05-20-2009 at 03:53 PM.

05-19-2009, 03:19 PM	#13
Nicky Drives: 2005 Nissan Altima Join Date: May 2009 Location: Puerto Rico Posts: 10	WOW this sounds mean as hell!!!! Last edited by Nicky; 05-19-2009 at 03:23 PM. Reason: link already posted

05-19-2009, 03:20 PM	#14
garagelogic Account Suspended Drives: 2010 Shelby GT500 Join Date: Jul 2008 Location: Tennessee Posts: 1,688 View My Garage	I've ran SW's stuff on several cars in the past and it's all been top-notch stuff. Fit and finish has been spot on in all cases. it may seem high, but it is well worth the price.

05-19-2009, 03:21 PM	#16
radz28 Petro-sexual Drives: Ultra-Grin Join Date: Oct 2006 Location: Crapramento, Crapifornia Posts: 12,949 View My Garage	OH YEAH!!! THAT'S WHAT I'M TALKIN' ABOUT!!! Thanks __________________ "...What IS true: We anticipated that this would happen - we are never finished - and yes, Ford DOES deserve to win now and then. To think that GM can come out with a car to make ford throw in the towel is simply foolhardy..." - fbodfather

05-19-2009, 03:27 PM	#17
69 Hugger Drives: 69 Convertible Camaro Join Date: Sep 2008 Location: Sumit Point, WV Posts: 945 View My Garage	Nice did he chirp forth ? I think thats the one for me.

05-19-2009, 03:50 PM	#19
Milk 1027 Camaro➎ moderator Drives: 2010 1SS/RS IBM Join Date: Aug 2008 Location: AZ Posts: 13,306 View My Garage	updated op with videos. __________________

05-19-2009, 03:56 PM	#21
GMtothecore "That Guy" Drives: Camaro SS...........what else? Join Date: Apr 2009 Location: OOOOOOOklahoma where the wind comes sweepin' down the plains. Posts: 2,403	Scarrrrrry! __________________

05-19-2009, 03:57 PM	#22
logan1080 Drives: 2003 Crew Cab Duramax Join Date: Aug 2008 Location: canada Posts: 692 View My Garage	Do you guys think that 3" pipes are to big for a N/A engine? Enough back pressure? And which headers size for a N/A engine? 1 7/8?

05-19-2009, 04:03 PM	#24
Tactical Z Banned Drives: Nissan Titan Join Date: Feb 2009 Location: San Antonio, Texas Posts: 8,685	That sounds amazing.

05-19-2009, 04:04 PM	#25
Camaro_Corvette 50.335252,6.947103 Drives: Anything with wheels Join Date: Mar 2008 Location: Earth Posts: 20,195 View My Garage	Perfect! Thats the sound I have been looking for! __________________