Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
B&M
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > General Camaro Forums > Regional Forums > USA - Florida

USA - Florida The Sunshine State

Reply
 
Thread Tools
Old 06-30-2013, 12:53 PM   #701
AFCMSGTRET
TCC SWFL Chapter
 
AFCMSGTRET's Avatar
 
Drives: 2012 Camaro 2SS LS3 Black/IO Vert
Join Date: Oct 2011
Location: Lehigh Acres FL
Posts: 1,058
Quote:
Originally Posted by trav2010ss View Post
no, i need something more practical with the baby and if we have another in a couple years they wont fit to well in a camaro or corvette..as much as i'd love to have a c7.
For years I constantly told my kids that if we had never had them, I would have been driving Vettes most of my life. I spent a lifetime driving four door sedans, SUVs and station wagons. But the Camaro is fun and it has the backseat when the granddaughter wants to ride with us...now if I could just get her to stop complaining about the wind when the top is down!
__________________
TRI-COUNTY CAMAROS
OFTEN IMITATED BUT
NEVER DUPLICATED
AFCMSGTRET is offline   Reply With Quote
Old 06-30-2013, 06:54 PM   #702
Kiernans88
TRI-COUNTY CAMARO TAMPA
 
Kiernans88's Avatar
 
Drives: 2011 Camaro SS/RS IBM M6
Join Date: Jul 2012
Location: Palmetto, Florida
Posts: 925
Quote:
Originally Posted by trav2010ss View Post
I am selling my 2010 SS and have a number of new parts still in the box never used to sell. Most are suspension upgrades. After 5 months with a cat seat ive decided ive held on long enough.

melling high volume oil pump
ADM Boost gauge
zr-1 3 bar map sensor
BMR Diff bushings
BMR cradle bushings
BMR rear trailing arms
BMR rear toe links
BMR rear driveshaft hoop
zl-1 fuel pump

I am also willing to part with my wheels. strasse forged 3 piece 20x11 and 20x9 with 275/40/20 front and 315/35/20 rear. tires have less than 5000 miles on them
Thanks for the great deal Travis! See ya Thursday
__________________


FSP Custom Grind Comp Cam - K&N CAI - 1 3/4" BBK Full Length Headers - BBK High Flow Cats - Kooks 3" Street Screamer Catback - VMax TB - Barton Short Throw - BMR Suspension/Bushings - Eibach Pro-Kit Springs -Tuned by Florida Speed and Power (FSP)
Kiernans88 is offline   Reply With Quote
Old 06-30-2013, 08:45 PM   #703
trav2010ss
 
trav2010ss's Avatar
 
Drives: 2010 CTS-V Black Raven
Join Date: Nov 2009
Location: North Port, FL
Posts: 233
Quote:
Originally Posted by Kiernans88 View Post
Thanks for the great deal Travis! See ya Thursday
Not a problem, i have plenty more parts if anyone is interested...
trav2010ss is offline   Reply With Quote
Old 06-30-2013, 09:17 PM   #704
flyer08
Tri-County Camaros
 
flyer08's Avatar
 
Drives: 2010 2SS/RS
Join Date: Jun 2009
Location: St Pete
Posts: 2,456
Keep listing them, sure someone will want em
flyer08 is online now   Reply With Quote
Old 06-30-2013, 09:31 PM   #705
Kiernans88
TRI-COUNTY CAMARO TAMPA
 
Kiernans88's Avatar
 
Drives: 2011 Camaro SS/RS IBM M6
Join Date: Jul 2012
Location: Palmetto, Florida
Posts: 925
Quote:
Originally Posted by trav2010ss View Post
Not a problem, i have plenty more parts if anyone is interested...
Better bring extra cash with me if that's the case lol
__________________


FSP Custom Grind Comp Cam - K&N CAI - 1 3/4" BBK Full Length Headers - BBK High Flow Cats - Kooks 3" Street Screamer Catback - VMax TB - Barton Short Throw - BMR Suspension/Bushings - Eibach Pro-Kit Springs -Tuned by Florida Speed and Power (FSP)
Kiernans88 is offline   Reply With Quote
Old 07-01-2013, 07:26 PM   #706
trav2010ss
 
trav2010ss's Avatar
 
Drives: 2010 CTS-V Black Raven
Join Date: Nov 2009
Location: North Port, FL
Posts: 233
Quote:
Originally Posted by Kiernans88 View Post
Better bring extra cash with me if that's the case lol
Take a look at my other posts i have other stuff still available. there are a few things im not going to take the time to take off but most parts will go.
trav2010ss is offline   Reply With Quote
Old 07-01-2013, 08:43 PM   #707
flyer08
Tri-County Camaros
 
flyer08's Avatar
 
Drives: 2010 2SS/RS
Join Date: Jun 2009
Location: St Pete
Posts: 2,456
Interested in trading tail light bezels?
flyer08 is online now   Reply With Quote
Old 07-01-2013, 08:48 PM   #708
trav2010ss
 
trav2010ss's Avatar
 
Drives: 2010 CTS-V Black Raven
Join Date: Nov 2009
Location: North Port, FL
Posts: 233
Quote:
Originally Posted by flyer08 View Post
Interested in trading tail light bezels?
I have a couple little marks in them. Tired of those old chrome bezels?
trav2010ss is offline   Reply With Quote
Old 07-02-2013, 08:35 AM   #709
RedDragonSS
Account Suspended
 
Drives: Red Camaro 2SS
Join Date: Jan 2011
Location: Miami,FL
Posts: 6,566
John where u been keeping quiet at??? Hopefully not under the thighs of you know who.....

Ive been MIA lately trying to keep up with work. I will hopefully get a few things resolved this week and schedule a few party dates for everyone to hang out at... See if Robert still knows how to drink......
RedDragonSS is offline   Reply With Quote
Old 07-02-2013, 01:30 PM   #710
spd2612
TRI-COUNTY CAMAROS
 
spd2612's Avatar
 
Drives: Black SS2/RS LS3
Join Date: Jun 2011
Location: FT. Myers FL.
Posts: 731
Quote:
Originally Posted by RedDragonSS View Post
John where u been keeping quiet at??? Hopefully not under the thighs of you know who.....

Ive been MIA lately trying to keep up with work. I will hopefully get a few things resolved this week and schedule a few party dates for everyone to hang out at... See if Robert still knows how to drink......
Been working my ass off and have been sick at the same time Have to go to Chicago next week
Trying to make money for more Mods
Have to pull my rear Differential and axles this week end
__________________
CAI, MGW Short Throw,Concept SMD Sidemarker lights, LED Sequential Tail Lights, MSD Digital Shift Light, LPE LNC-2000, LPE CTAP-001, 1 7/8 Long Tubes, 3 inch Stainless exhaust header back, X Pipe, Cat Delete, Solo J-Pipe Mod, Powder Coated Wheels, FSP Custom Grind Comp Cam's, VMax TB., PFADT TL, TA, SF Bushings LPW Diff Cover, DSS Axles & aluminum drive shaft, ES Diff Bushings JRE Billet caps, AAM 3:91 gears, Eaton Tru-Trac, Mantic ER2 Clutch
[IMG]http://************************/mybanner2.jpg[/IMG]
spd2612 is offline   Reply With Quote
Old 07-02-2013, 01:33 PM   #711
spd2612
TRI-COUNTY CAMAROS
 
spd2612's Avatar
 
Drives: Black SS2/RS LS3
Join Date: Jun 2011
Location: FT. Myers FL.
Posts: 731
Quote:
Originally Posted by trav2010ss View Post
I am selling my 2010 SS and have a number of new parts still in the box never used to sell. Most are suspension upgrades. After 5 months with a cat seat ive decided ive held on long enough.

melling high volume oil pump
ADM Boost gauge
zr-1 3 bar map sensor
BMR Diff bushings
BMR cradle bushings
BMR rear trailing arms
BMR rear toe links
BMR rear driveshaft hoop
zl-1 fuel pump

I am also willing to part with my wheels. strasse forged 3 piece 20x11 and 20x9 with 275/40/20 front and 315/35/20 rear. tires have less than 5000 miles on them
I am sorry to here it is being sold, I guess you thought long and hard about it
and It is the right choice for you
__________________
CAI, MGW Short Throw,Concept SMD Sidemarker lights, LED Sequential Tail Lights, MSD Digital Shift Light, LPE LNC-2000, LPE CTAP-001, 1 7/8 Long Tubes, 3 inch Stainless exhaust header back, X Pipe, Cat Delete, Solo J-Pipe Mod, Powder Coated Wheels, FSP Custom Grind Comp Cam's, VMax TB., PFADT TL, TA, SF Bushings LPW Diff Cover, DSS Axles & aluminum drive shaft, ES Diff Bushings JRE Billet caps, AAM 3:91 gears, Eaton Tru-Trac, Mantic ER2 Clutch
[IMG]http://************************/mybanner2.jpg[/IMG]
spd2612 is offline   Reply With Quote
Old 07-02-2013, 02:13 PM   #712
RedDragonSS
Account Suspended
 
Drives: Red Camaro 2SS
Join Date: Jan 2011
Location: Miami,FL
Posts: 6,566
Quote:
Originally Posted by spd2612 View Post
Been working my ass off and have been sick at the same time Have to go to Chicago next week
Trying to make money for more Mods
Have to pull my rear Differential and axles this week end
Here you go to brighten your day up a bit....
Attached Images
 
RedDragonSS is offline   Reply With Quote
Old 07-02-2013, 06:01 PM   #713
flyer08
Tri-County Camaros
 
flyer08's Avatar
 
Drives: 2010 2SS/RS
Join Date: Jun 2009
Location: St Pete
Posts: 2,456
Only a Boston or Michigan chick look like that
flyer08 is online now   Reply With Quote
Old 07-02-2013, 06:07 PM   #714
Kiernans88
TRI-COUNTY CAMARO TAMPA
 
Kiernans88's Avatar
 
Drives: 2011 Camaro SS/RS IBM M6
Join Date: Jul 2012
Location: Palmetto, Florida
Posts: 925
Quote:
Originally Posted by flyer08 View Post
Only a Boston or Michigan chick look like that
Don't forget Wisconsin
__________________


FSP Custom Grind Comp Cam - K&N CAI - 1 3/4" BBK Full Length Headers - BBK High Flow Cats - Kooks 3" Street Screamer Catback - VMax TB - Barton Short Throw - BMR Suspension/Bushings - Eibach Pro-Kit Springs -Tuned by Florida Speed and Power (FSP)
Kiernans88 is offline   Reply With Quote
Old 07-03-2013, 08:11 AM   #715
AFCMSGTRET
TCC SWFL Chapter
 
AFCMSGTRET's Avatar
 
Drives: 2012 Camaro 2SS LS3 Black/IO Vert
Join Date: Oct 2011
Location: Lehigh Acres FL
Posts: 1,058

Today's Inspirational Message:


Never piss off a woman

who can drive a backhoe...



Name:  truck.png
Views: 137
Size:  579.4 KB


__________________
TRI-COUNTY CAMAROS
OFTEN IMITATED BUT
NEVER DUPLICATED
AFCMSGTRET is offline   Reply With Quote
Old 07-04-2013, 04:54 PM   #716
Bad Dad

 
Bad Dad's Avatar
 
Drives: 2010 2SS/RS , 2014 LML 3500 SIVERAD
Join Date: Feb 2010
Location: Naples Florida
Posts: 1,021
Check this out

Bad Dad is offline   Reply With Quote
Old 07-05-2013, 07:00 AM   #717
AFCMSGTRET
TCC SWFL Chapter
 
AFCMSGTRET's Avatar
 
Drives: 2012 Camaro 2SS LS3 Black/IO Vert
Join Date: Oct 2011
Location: Lehigh Acres FL
Posts: 1,058
Quote:
Originally Posted by Bad Dad View Post
Epic video Mike. Can't wait to see/hear the car in person!
__________________
TRI-COUNTY CAMAROS
OFTEN IMITATED BUT
NEVER DUPLICATED
AFCMSGTRET is offline   Reply With Quote
Old 07-06-2013, 06:09 PM   #718
spd2612
TRI-COUNTY CAMAROS
 
spd2612's Avatar
 
Drives: Black SS2/RS LS3
Join Date: Jun 2011
Location: FT. Myers FL.
Posts: 731
Just FYI

Thanks to Jerry, was at his house yesterday tearing apart my car again.
I can say that if you don't need to replace your differential bushing don't !!! they are a bitch to replace, the Differential comes out without to many issues but removing the factory bushings is no fun, when you drill out the rubber with a hole saw it jells it and gets all over everything, don't tell Jerry's wife where the black stuff on the kitchen floor came from lol !! I had to replace them as I installed the LPW diff cover and DSS axles thanks to FSP
I had to install a new bushing in the LPW cover and was concerned that if I used a urethane bushing in the rear cover and left the front stock ones it would load the rear bushing too much
I used Royal Purple 75/90 diff fluid and it was to noisy so I changed it to the GM and 4 oz of friction modifier and it quieted it down but I still here some gear noise if listening for it
I guess when the whole back is on solid or polyurethane that's how its going to be
But my car should be as solid as it can be for now.... Knock On Wood
__________________
CAI, MGW Short Throw,Concept SMD Sidemarker lights, LED Sequential Tail Lights, MSD Digital Shift Light, LPE LNC-2000, LPE CTAP-001, 1 7/8 Long Tubes, 3 inch Stainless exhaust header back, X Pipe, Cat Delete, Solo J-Pipe Mod, Powder Coated Wheels, FSP Custom Grind Comp Cam's, VMax TB., PFADT TL, TA, SF Bushings LPW Diff Cover, DSS Axles & aluminum drive shaft, ES Diff Bushings JRE Billet caps, AAM 3:91 gears, Eaton Tru-Trac, Mantic ER2 Clutch
[IMG]http://************************/mybanner2.jpg[/IMG]
spd2612 is offline   Reply With Quote
Old 07-06-2013, 08:31 PM   #719
trav2010ss
 
trav2010ss's Avatar
 
Drives: 2010 CTS-V Black Raven
Join Date: Nov 2009
Location: North Port, FL
Posts: 233
Quote:
Originally Posted by spd2612 View Post
Thanks to Jerry, was at his house yesterday tearing apart my car again.
I can say that if you don't need to replace your differential bushing don't !!! they are a bitch to replace, the Differential comes out without to many issues but removing the factory bushings is no fun, when you drill out the rubber with a hole saw it jells it and gets all over everything, don't tell Jerry's wife where the black stuff on the kitchen floor came from lol !! I had to replace them as I installed the LPW diff cover and DSS axles thanks to FSP
I had to install a new bushing in the LPW cover and was concerned that if I used a urethane bushing in the rear cover and left the front stock ones it would load the rear bushing too much
I used Royal Purple 75/90 diff fluid and it was to noisy so I changed it to the GM and 4 oz of friction modifier and it quieted it down but I still here some gear noise if listening for it
I guess when the whole back is on solid or polyurethane that's how its going to be
But my car should be as solid as it can be for now.... Knock On Wood
here's the real question. When do we see some track times???
trav2010ss is offline   Reply With Quote
Old 07-06-2013, 08:49 PM   #720
spd2612
TRI-COUNTY CAMAROS
 
spd2612's Avatar
 
Drives: Black SS2/RS LS3
Join Date: Jun 2011
Location: FT. Myers FL.
Posts: 731
A couple weeks im out of town next week
__________________
CAI, MGW Short Throw,Concept SMD Sidemarker lights, LED Sequential Tail Lights, MSD Digital Shift Light, LPE LNC-2000, LPE CTAP-001, 1 7/8 Long Tubes, 3 inch Stainless exhaust header back, X Pipe, Cat Delete, Solo J-Pipe Mod, Powder Coated Wheels, FSP Custom Grind Comp Cam's, VMax TB., PFADT TL, TA, SF Bushings LPW Diff Cover, DSS Axles & aluminum drive shaft, ES Diff Bushings JRE Billet caps, AAM 3:91 gears, Eaton Tru-Trac, Mantic ER2 Clutch
[IMG]http://************************/mybanner2.jpg[/IMG]
spd2612 is offline   Reply With Quote
Old 07-06-2013, 11:42 PM   #721
Matt @ FSP

 
Matt @ FSP's Avatar
 
Drives: 2011 Camaro SS
Join Date: Dec 2012
Location: Bradenton, FL
Posts: 2,500
Quote:
Originally Posted by spd2612 View Post
Thanks to Jerry, was at his house yesterday tearing apart my car again.
I can say that if you don't need to replace your differential bushing don't !!! they are a bitch to replace, the Differential comes out without to many issues but removing the factory bushings is no fun, when you drill out the rubber with a hole saw it jells it and gets all over everything, don't tell Jerry's wife where the black stuff on the kitchen floor came from lol !! I had to replace them as I installed the LPW diff cover and DSS axles thanks to FSP
I had to install a new bushing in the LPW cover and was concerned that if I used a urethane bushing in the rear cover and left the front stock ones it would load the rear bushing too much
I used Royal Purple 75/90 diff fluid and it was to noisy so I changed it to the GM and 4 oz of friction modifier and it quieted it down but I still here some gear noise if listening for it
I guess when the whole back is on solid or polyurethane that's how its going to be
But my car should be as solid as it can be for now.... Knock On Wood

Poly diff bushings will increase noise in the rear. And John not saying I told you so but what did I tell you to buy fluid-wise?!!? Make sure you are using DEXRON LS Gear Oil by the way, not just the GM synthetic. The LS gear oil has the additive in it so no need to add more to the modifier.
Matt @ FSP is offline   Reply With Quote
Old 07-07-2013, 12:36 PM   #722
spd2612
TRI-COUNTY CAMAROS
 
spd2612's Avatar
 
Drives: Black SS2/RS LS3
Join Date: Jun 2011
Location: FT. Myers FL.
Posts: 731
Quote:
Originally Posted by Matt @ FSP View Post
Poly diff bushings will increase noise in the rear. And John not saying I told you so but what did I tell you to buy fluid-wise?!!? Make sure you are using DEXRON LS Gear Oil by the way, not just the GM synthetic. The LS gear oil has the additive in it so no need to add more to the modifier.

You can say I told you so! I just didn't want to make the trip to the dealer After 100.00 in gear oil I should have
The slight gear noise and clutch pack drag is not even noticeable with the radio on

I ran out of parts to put on, but Matt I'm going to let you and Rodney do the clutch I am getting to old to do that shit with out a lift

Oh and guys we have a big meet that will be alot of fun Bikini contest, live music and alot more on the 27th
It will be huge and Tampa and Miami guys why dont you come and join us this is a real well organised event here in Ft Myers we will have roped off parking and Hooters girls for pics
I will post all the info as soon as I have it
__________________
CAI, MGW Short Throw,Concept SMD Sidemarker lights, LED Sequential Tail Lights, MSD Digital Shift Light, LPE LNC-2000, LPE CTAP-001, 1 7/8 Long Tubes, 3 inch Stainless exhaust header back, X Pipe, Cat Delete, Solo J-Pipe Mod, Powder Coated Wheels, FSP Custom Grind Comp Cam's, VMax TB., PFADT TL, TA, SF Bushings LPW Diff Cover, DSS Axles & aluminum drive shaft, ES Diff Bushings JRE Billet caps, AAM 3:91 gears, Eaton Tru-Trac, Mantic ER2 Clutch
[IMG]http://************************/mybanner2.jpg[/IMG]
spd2612 is offline   Reply With Quote
Old 07-07-2013, 07:26 PM   #723
Bad Dad

 
Bad Dad's Avatar
 
Drives: 2010 2SS/RS , 2014 LML 3500 SIVERAD
Join Date: Feb 2010
Location: Naples Florida
Posts: 1,021
NOISE

Quote:
Originally Posted by Matt @ FSP View Post
Poly diff bushings will increase noise in the rear. And John not saying I told you so but what did I tell you to buy fluid-wise?!!? Make sure you are using DEXRON LS Gear Oil by the way, not just the GM synthetic. The LS gear oil has the additive in it so no need to add more to the modifier.

Damn John trade it for a CTSV I'm sure Matt can make it go fast and quiet for the elder in you ....................LOL
Bad Dad is offline   Reply With Quote
Old 07-08-2013, 06:56 AM   #724
AFCMSGTRET
TCC SWFL Chapter
 
AFCMSGTRET's Avatar
 
Drives: 2012 Camaro 2SS LS3 Black/IO Vert
Join Date: Oct 2011
Location: Lehigh Acres FL
Posts: 1,058
Quote:
Originally Posted by Bad Dad View Post
Damn John trade it for a CTSV I'm sure Matt can make it go fast and quiet for the elder in you ....................LOL
:emotic on11::em oticon5:
__________________
TRI-COUNTY CAMAROS
OFTEN IMITATED BUT
NEVER DUPLICATED
AFCMSGTRET is offline   Reply With Quote
Old 07-16-2013, 11:29 AM   #725
spd2612
TRI-COUNTY CAMAROS
 
spd2612's Avatar
 
Drives: Black SS2/RS LS3
Join Date: Jun 2011
Location: FT. Myers FL.
Posts: 731
Damn its quite in here !!!!!!!
Hey guys dont forget we have that fun party coming up at Hooters on the 27th
Live Bands, Generater lights for our cars Bikini contest and more Last year when we did this their was probably 5000 or more people that showed up
I will post more info as soon as I get it from the GM at Hooters
__________________
CAI, MGW Short Throw,Concept SMD Sidemarker lights, LED Sequential Tail Lights, MSD Digital Shift Light, LPE LNC-2000, LPE CTAP-001, 1 7/8 Long Tubes, 3 inch Stainless exhaust header back, X Pipe, Cat Delete, Solo J-Pipe Mod, Powder Coated Wheels, FSP Custom Grind Comp Cam's, VMax TB., PFADT TL, TA, SF Bushings LPW Diff Cover, DSS Axles & aluminum drive shaft, ES Diff Bushings JRE Billet caps, AAM 3:91 gears, Eaton Tru-Trac, Mantic ER2 Clutch
[IMG]http://************************/mybanner2.jpg[/IMG]
spd2612 is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:46 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.