Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Anthony @ LG Motorsports
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Technical Camaro Topics > Audio, Video, Bluetooth, Navigation, Radar, Electronics Forum

Audio, Video, Bluetooth, Navigation, Radar, Electronics Forum All audio, video, bluetooth, nav, radar, and electronics discussions.

Reply
 
Thread Tools
Old 07-30-2012, 06:31 PM   #1
jshaf


 
jshaf's Avatar
 
Drives: 2011 Black 2SS/RS w/ IOM stripes
Join Date: Feb 2010
Location: Masontown, WV
Posts: 3,126
Any concerns with this amp/speaker combo?

Alpine MRX-V70
5-channel car amplifier
60 watts RMS x 4 + 250 watts RMS x 1 at 4 ohms
90 watts RMS x 4 + 350 watts RMS x 1 at 2 ohms
180 watts RMS x 2 bridged at 4 ohms + 350 watts RMS x 1 at 2 ohms

The speakers: Polk DXI 6500 component's for the front doors rated 250 watt peak /125RMS and Polk DXI 690 for the back rated 300peak /125 RMS.

any concerns with these working together? think I am good but never hurts to get a second opinion
__________________

Last edited by jshaf; 07-30-2012 at 07:07 PM.
jshaf is offline   Reply With Quote
Old 07-30-2012, 09:07 PM   #2
CrutchfieldBrooke
 
CrutchfieldBrooke's Avatar
 
Drives: 2010 Camaro, 1968 Camaro
Join Date: Apr 2012
Location: Norton, VA
Posts: 333
The Polk speakers will certainly work with the Alpine amp without a problem, although they could handle more power if you wanted.

What are you doing for a sub with the amp?
CrutchfieldBrooke is offline   Reply With Quote
Old 07-30-2012, 09:15 PM   #3
Double D Mods
 
Double D Mods's Avatar
 
Drives: 2012 Grand Sport Convertible Vette
Join Date: May 2011
Location: DD MODS Kieler, Wi
Posts: 575
you want a nice 5 channel amp to power a system...
I have these instock for a great price.

http://www.massiveaudio.com/store/pr...cat=251&page=1
Double D Mods is offline   Reply With Quote
Old 07-30-2012, 11:44 PM   #4
darkrider01
Deaf Audiophile
 
darkrider01's Avatar
 
Drives: 2010 IBM 2SS/RS, 2014 Cruze 1LT/RS
Join Date: Jun 2011
Location: Garner, NC
Posts: 631
Quote:
Originally Posted by jshaf View Post
Alpine MRX-V70
5-channel car amplifier
60 watts RMS x 4 + 250 watts RMS x 1 at 4 ohms
90 watts RMS x 4 + 350 watts RMS x 1 at 2 ohms
180 watts RMS x 2 bridged at 4 ohms + 350 watts RMS x 1 at 2 ohms

The speakers: Polk DXI 6500 component's for the front doors rated 250 watt peak /125RMS and Polk DXI 690 for the back rated 300peak /125 RMS.

any concerns with these working together? think I am good but never hurts to get a second opinion
Well, with just the 60x4 you're going to have more than double the power of the factory Boston system. Anything would sound better than the factory Boston amp, so you're good there too. You'll probably be in heaven when you have it all hooked up.
__________________
My amplifier pop/click/thump solution thread
Power Mods * K&N Typhoon CAI, Flowmaster American Thunder cat-back exhaust, Hurst Short Throw Shifter Visual Mods * Black Phantom Grille
Audio Mods * Stinger SPP 2250 Battery * Pioneer DEX-P99RS * Pioneer AVH-X7500BT * Scosche Dash Kit * 2 - Mosconi AS200.4 * 2 - JL Audio 13W6v2 * Focal 165KRX2 Power (active) * Mosconi Gladen One 240.2 * Rockford Fosgate Power T1692
darkrider01 is offline   Reply With Quote
Old 07-31-2012, 07:08 PM   #5
jshaf


 
jshaf's Avatar
 
Drives: 2011 Black 2SS/RS w/ IOM stripes
Join Date: Feb 2010
Location: Masontown, WV
Posts: 3,126
Quote:
Originally Posted by darkrider01 View Post
Well, with just the 60x4 you're going to have more than double the power of the factory Boston system. Anything would sound better than the factory Boston amp, so you're good there too. You'll probably be in heaven when you have it all hooked up.
Since I have the non BA system it should be even better
__________________
jshaf is offline   Reply With Quote
Old 07-31-2012, 07:12 PM   #6
jshaf


 
jshaf's Avatar
 
Drives: 2011 Black 2SS/RS w/ IOM stripes
Join Date: Feb 2010
Location: Masontown, WV
Posts: 3,126
Quote:
Originally Posted by CrutchfieldBrooke View Post
The Polk speakers will certainly work with the Alpine amp without a problem, although they could handle more power if you wanted.

What are you doing for a sub with the amp?
Have an Alpine 10" Single voice coil 4ohm E-series Sub , didn't need over the top base just something to balance out whatever I decided on with the fronts and rear deck. have it already thumping with the factory speekers that are still being powered by the factory HU. can't wait to get it all hooked up and firing on all cylinders so to speak
__________________
jshaf is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:09 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.