1LE Parts?? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

MikeSVX · 07-31-2012, 10:55 AM

Will the the parts from the 1LE be offered through GMs parts departments so that owners with previous model years can fit the parts to there cars?

I've put a good bit of work into my car already to make it my own and have neither the desire nor the money to trade in for a new 1LE SS. I would have to start all over.

orangejuice · 07-31-2012, 10:55 AM

They're already starting to be available I am almost dead sure.

Mikamaro · 07-31-2012, 11:00 AM

I wan to know aswell.

monstertodd · 07-31-2012, 11:33 AM

Hopefully the entire rear end will be available and will retrofit.

woodside783 · 07-31-2012, 11:43 AM

second that

meissen · 07-31-2012, 11:52 AM

If they were for the ZL1, I don't see any reason why it wouldn't for the 1LE. You just have to get the part number. Try contacting Maureen@RodgersChevrolet and see what she can find for you.

woodside783 · 07-31-2012, 12:19 PM

is it a different rear sub frame anyone remember

slick rick · 07-31-2012, 12:41 PM

Some part numbers here http://www.camaro5.com/forums/showthread.php?t=237956

monstertodd · 07-31-2012, 12:45 PM

Any care to venture an opinion on the ability of the 1LE rear end parts to hold up to boosted power?

SlingShot · 07-31-2012, 12:56 PM

Quote:

Originally Posted by monstertodd

Any care to venture an opinion on the ability of the 1LE rear end parts to hold up to boosted power?

I would venture to say it is the same gear as the LPE. The same company makes the GM oem gears as the LPE. I'm sure you could contact LPE for any questions you may have.

http://www.lingenfelter.com/mm5/merc...egory_Code=C61

monstertodd · 07-31-2012, 02:57 PM

Quote:

Originally Posted by SlingShot

I would venture to say it is the same gear as the LPE. The same company makes the GM oem gears as the LPE. I'm sure you could contact LPE for any questions you may have.

http://www.lingenfelter.com/mm5/merc...egory_Code=C61

I'm sure the gears will hold up fine since they are made by AAM. I'm really curious about the drive shaft though. I'm wondering if it is a two piece drive shaft like the SS, or if they went with a 1 piece.

United_727 · 07-31-2012, 03:36 PM

The strut tower brace is the same one used on 'verts.

ackeight · 07-31-2012, 04:06 PM

Looking forward to some lower priced gears and axles. Hopefully

Buck Heard · 08-09-2012, 09:36 AM

Anyone know what the part numbers are for the red brake calipers?

Higgs Boson · 08-09-2012, 11:51 AM

Damn, I would not buy new calipers for the color. Get some caliper paint.

United_727 · 08-09-2012, 12:45 PM

Quote:

Originally Posted by Buck Heard

Anyone know what the part numbers are for the red brake calipers?

They are $1670 each !

Butcher · 08-09-2012, 12:47 PM

Quote:

Originally Posted by monstertodd

Hopefully the entire rear end will be available and will retrofit.

Quote:

Originally Posted by ackeight

Looking forward to some lower priced gears and axles. Hopefully

I just read an article that said the gears will not be available thru GM. There was one other part that wouldn't be available, but I don't remember what it was. Maybe the article was wrong, but I'm sure we'll find out soon enough.

Buck Heard · 08-09-2012, 12:49 PM

No offense but I want it to look perfect and to do that with just paint would mean disassembling the originals and then relettering them after painting. I think it would be best just to buy them out right.

jlugo · 08-09-2012, 12:50 PM

This is what i have 'so far'...

3.91 Gear Set, Part# 22813040 (GM List price $331.05)

1LE Axles - ($196.07ea)
LH Axle, part num:22806795/ RH Axle part num:22806796

Does anyone know the part#'s for the Sway Bars and the 'Quad' Diffuser?

Buck Heard · 08-09-2012, 12:51 PM

$1670??? That's uh, a little steep. What are the part numbers?

nak3dsnake · 08-09-2012, 12:55 PM

Quad Diffuser is 22815277 and is $309.00.

jlugo · 08-09-2012, 01:04 PM

Quote:

Originally Posted by nak3dsnake

Quad Diffuser is 22815277 and is $309.00.

Thanks!...

United_727 · 08-09-2012, 03:12 PM

LF # 22833922
RF # 22833923
RR # 22833924
LR # 22833925

Buck Heard · 08-09-2012, 04:01 PM

Thanks 727. Appreciate it.

1badtie · 08-09-2012, 04:02 PM

wish they just had a complete kit that was a dealer install

07-31-2012, 10:55 AM	#1
MikeSVX Drives: 2010 1SS Join Date: Dec 2009 Location: Escondido, CA Posts: 1,814	1LE Parts?? Will the the parts from the 1LE be offered through GMs parts departments so that owners with previous model years can fit the parts to there cars? I've put a good bit of work into my car already to make it my own and have neither the desire nor the money to trade in for a new 1LE SS. I would have to start all over.

07-31-2012, 10:55 AM	#2
orangejuice H1 OFCR Drives: 2011 Camaro 2SS/RS IOM Join Date: Jun 2011 Location: Shelby Twp., Michigan Posts: 1,256	They're already starting to be available I am almost dead sure. __________________ Corsa Rotofab BBK ZL1 Hood/Fascia AAC Afterburners/Sidemarkers Havoc Black Chrome 5% Tint/20% Smoked Taillights

07-31-2012, 11:00 AM	#3
Mikamaro (Prononce Mike-Camaro!) Drives: A 2010 CAMARO SS-LS3 Join Date: Sep 2009 Location: In the Land of the GenIV Camaros & Firebirds. Posts: 644	I wan to know aswell. __________________ Built #83817, Born January 18th 2010, First Drive May 15th, Christened June 11th 2010.

07-31-2012, 11:33 AM	#4
monstertodd Allyourbasearebelongtous Drives: 2010 Cyber Grey Metallic 2SS/RS M6 Join Date: Nov 2009 Location: Tega Cay, South Carolina Posts: 3,470 View My Garage	Hopefully the entire rear end will be available and will retrofit. __________________

07-31-2012, 11:43 AM	#5
woodside783 Casey Woodside Drives: 2010 Join Date: Jun 2010 Location: South Posts: 509	second that __________________ I want to be Steve http://youtu.be/CSc9aPh_X_w

07-31-2012, 11:52 AM	#6
meissen Founder - Michigan FBody Drives: 1994 Camaro LT1, 2012 Camaro LFX Join Date: Jun 2008 Location: Chesterfield Twp, MI Posts: 2,010	If they were for the ZL1, I don't see any reason why it wouldn't for the 1LE. You just have to get the part number. Try contacting Maureen@RodgersChevrolet and see what she can find for you. __________________ 2012 Camaro LFX M6 - "Clifford" - 270hp/232tq on Dynojet (before TB was installed) - Cold Air Inductions CAI, VMAX Ported Throttle Body, MGW Short Throw Shifter 1994 Camaro LT1 A4 - "Red Alert" - v6-to-LT1 Swapped Cruiser; Cammed, Stalled, Enjoyed Michigan FBody Association http://www.mifbody.com/ Proud member of the unofficial Camaro5 "Rodgers Chevrolet Fan Club"

07-31-2012, 12:19 PM	#7
woodside783 Casey Woodside Drives: 2010 Join Date: Jun 2010 Location: South Posts: 509	is it a different rear sub frame anyone remember __________________ I want to be Steve http://youtu.be/CSc9aPh_X_w

07-31-2012, 12:41 PM	#8
slick rick SoCal Mayhem Drives: 2010 Camaro 1SS/RS Join Date: Aug 2008 Location: Foothill Ranch, CA Posts: 5,005 View My Garage	Some part numbers here http://www.camaro5.com/forums/showthread.php?t=237956 __________________

07-31-2012, 12:45 PM	#9
monstertodd Allyourbasearebelongtous Drives: 2010 Cyber Grey Metallic 2SS/RS M6 Join Date: Nov 2009 Location: Tega Cay, South Carolina Posts: 3,470 View My Garage	Any care to venture an opinion on the ability of the 1LE rear end parts to hold up to boosted power? __________________

07-31-2012, 03:36 PM	#12
United_727 Parts Guru Extraordinair. Drives: '11 1LT/RS M6 CGM,01 Cavalier (DD) Join Date: Mar 2011 Location: Upstate NY Posts: 604	The strut tower brace is the same one used on 'verts. __________________ No good deed goes unpunished...

07-31-2012, 04:06 PM	#13
ackeight Drives: 2SS-RS Join Date: Jan 2010 Location: DFW Posts: 1,090 View My Garage	Looking forward to some lower priced gears and axles. Hopefully __________________ Facebook Project page

08-09-2012, 09:36 AM	#14
Buck Heard Drives: 2012 Victory Red 1SS/RS Join Date: Apr 2012 Location: Meridianville, AL Posts: 86	Anyone know what the part numbers are for the red brake calipers?

08-09-2012, 11:51 AM	#15
Higgs Boson Big Time Newb Drives: C63 Join Date: Jun 2012 Location: San Antonio, Texas Posts: 1,236	Damn, I would not buy new calipers for the color. Get some caliper paint.

08-09-2012, 12:49 PM	#18
Buck Heard Drives: 2012 Victory Red 1SS/RS Join Date: Apr 2012 Location: Meridianville, AL Posts: 86	No offense but I want it to look perfect and to do that with just paint would mean disassembling the originals and then relettering them after painting. I think it would be best just to buy them out right.

08-09-2012, 12:50 PM	#19
jlugo Founding Member of 'CTCC' Drives: 'KILLER-BEE" Join Date: Jul 2009 Location: Temple, Texas Posts: 2,341 View My Garage	This is what i have 'so far'... 3.91 Gear Set, Part# 22813040 (GM List price $331.05) 1LE Axles - ($196.07ea) LH Axle, part num:22806795/ RH Axle part num:22806796 Does anyone know the part#'s for the Sway Bars and the 'Quad' Diffuser? __________________ Photo Gallery; (http://s100.photobucket.com/albums/m...view=slideshow) "KILLER-BEE" on Facebook; (https://www.facebook.com/jlkillerB)

08-09-2012, 12:51 PM	#20
Buck Heard Drives: 2012 Victory Red 1SS/RS Join Date: Apr 2012 Location: Meridianville, AL Posts: 86	$1670??? That's uh, a little steep. What are the part numbers? Last edited by Buck Heard; 08-09-2012 at 01:12 PM. Reason: Correction.

08-09-2012, 12:55 PM	#21
nak3dsnake Drives: 2010 Camaro IBM 2LT/RS M6 Join Date: Sep 2009 Location: Columbus, OH Posts: 2,151 View My Garage	Quad Diffuser is 22815277 and is $309.00. __________________ Looks: AAC P13W DRLs, Heritage Grille, RS Embroidered Headrests, GM Door Sill Plates, GM Premium Floor Mats, Body Color Engine Cover, LLT Mobile 1 Oil Cap, ZL1 Sport Pedals, 3M Clear Bra. Performance: Vararam Ram Air Intake, Hurst Short Throw Shifter w/ Hurst Hard Drive Pistol Grip, IDEALG Clutch Master Cylinder, RX Catch can, GTO clutch fluid reservoir, Brembo Brakes, 1LE Track Pack, GMPP Exhaust Upgrade. Future Mods: Pedders Stainless Steel brake lines, Stage III radius rod inserts, Rear Cradle Bushings.

08-09-2012, 03:12 PM	#23
United_727 Parts Guru Extraordinair. Drives: '11 1LT/RS M6 CGM,01 Cavalier (DD) Join Date: Mar 2011 Location: Upstate NY Posts: 604	LF # 22833922 RF # 22833923 RR # 22833924 LR # 22833925 __________________ No good deed goes unpunished...

08-09-2012, 04:01 PM	#24
Buck Heard Drives: 2012 Victory Red 1SS/RS Join Date: Apr 2012 Location: Meridianville, AL Posts: 86	Thanks 727. Appreciate it.

08-09-2012, 04:02 PM	#25
1badtie Drives: 2010 camaro 2ss rs Join Date: Nov 2009 Location: Central AR Posts: 876	wish they just had a complete kit that was a dealer install __________________ :5thgenvert: