Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Solo Performance
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > General Camaro Forums > Regional Forums > USA - Great Lakes

USA - Great Lakes IL, IN, MI, MN, OH, WI

Reply
 
Thread Tools
Old 12-08-2013, 10:34 AM   #1
bcf
 
Drives: 2010 rs/ss a6
Join Date: Sep 2011
Location: Three Rivers, Michigan
Posts: 47
Need a tuner around Mich.

I'am looking for a tuner that will work with my texas speed vvt cam. I live 20 miles south of Kalamazoo Mich. and 20 miles north of the Ind. line. JRE is remote tuning it right now and the car runs fine but, I'am not a computer guy and have all kinds of problems with logging and I really think the car needs to be on a dyno to get full potential out of it. I'am planning more mods and want a tuner within a reasonable distance that will work with me. I checked with Livornoise Motorsports but they will only work with me if I change the cam, they will not work with vvt cams. I really don't want to change cams again if I don't have to. Anyone know any good tuners my way.
__________________
2010 2ss/rs,a6,tvs2300,rear od cog,texas speed vvt1 cam and springs,lt headers,no cats,xpipe,and gm performance mufflers,rx catch can,cai,zl1 fuel pump,adm fpcm,I.D.850 inj.,ls3 conversion,zr1 3bar map. 160 stat, Jannetty remote tune. BMR toe rods, trailing arms, lower control arms, sway bars. Lowering springs.
bcf is offline   Reply With Quote
Old 12-09-2013, 03:12 PM   #2
bcf
 
Drives: 2010 rs/ss a6
Join Date: Sep 2011
Location: Three Rivers, Michigan
Posts: 47
I must be in tuner limbo out here. So noone knows of a tuner?
__________________
2010 2ss/rs,a6,tvs2300,rear od cog,texas speed vvt1 cam and springs,lt headers,no cats,xpipe,and gm performance mufflers,rx catch can,cai,zl1 fuel pump,adm fpcm,I.D.850 inj.,ls3 conversion,zr1 3bar map. 160 stat, Jannetty remote tune. BMR toe rods, trailing arms, lower control arms, sway bars. Lowering springs.
bcf is offline   Reply With Quote
Old 12-09-2013, 03:25 PM   #3
JANNETTYRACING
PRESIDENT CALIBRATOR JRE

 
JANNETTYRACING's Avatar
 
Drives: YELLOW 2013 ZL1 AUTO
Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 9,109
Quote:
Originally Posted by bcf View Post
I'am looking for a tuner that will work with my texas speed vvt cam. I live 20 miles south of Kalamazoo Mich. and 20 miles north of the Ind. line. JRE is remote tuning it right now and the car runs fine but, I'am not a computer guy and have all kinds of problems with logging and I really think the car needs to be on a dyno to get full potential out of it. I'am planning more mods and want a tuner within a reasonable distance that will work with me. I checked with Livornoise Motorsports but they will only work with me if I change the cam, they will not work with vvt cams. I really don't want to change cams again if I don't have to. Anyone know any good tuners my way.
We are More than happy to assist you in learning the software, I have a full time I.T. guy named Nick.

Give us a call and we will get you going.

I have No Problem making the car run to it's full Potential.

Ted.
__________________
Technical information, Parts Sales, Professional Installation, and Custom Dyno Tuning.
Please vist our web sites for all your performance needs!
Ted Jannetty
Jannetty Racing Ent Inc.
2984 East Main St.
Waterbury Ct. 06705
203-753-7223
tedj@jannettyracing.com
www.jannettyracing.com
www.turboaddictionparts.com
Performance Parts
JANNETTYRACING is offline   Reply With Quote
Old 12-09-2013, 03:40 PM   #4
CNC73
 
Drives: 2010 1ss m6 supercharged, 55 Chevy
Join Date: Oct 2011
Location: Metro detroit
Posts: 46
Livernois motorsports, Alternative auto, Vector motorsports and Stenod performance, are all in the metro Detroit area.
CNC73 is offline   Reply With Quote
Old 12-09-2013, 04:43 PM   #5
jessrayo
Speed Freak
 
jessrayo's Avatar
 
Drives: 2013 ZL1 Camaro
Join Date: Jun 2013
Location: Ardmore, OK
Posts: 1,352
Livernois either can't or won't work with your cam? Hmmm...
I think Fort Wayne is just as close, maybe you could make an appointment with Lingenfelter and they would do it. They are somewhere around there.
__________________
ADM - 434 ERL superdeck block. Trickflow 6 bolt heads, ADM cam, valves, springs. Heartbeat 2300 blower. RPM custom manual trans, RPS triple carbon clutch, 3.23 rear diff. LPE pulley upgrades, IDE1200's. ADM 2000hp fuel system, ADM trunk mount intercooler reservoir, Ron Davis heat ex, and radiator, LPE oil cooler, rear subframe bushing upgrade, roll bar, Hurst line lock kit, braided brake and clutch lines, Motul 660 and Porterfield R4 pads, racingbrake rotors. New dyno numbers pending after turbo install.
jessrayo is offline   Reply With Quote
Old 12-09-2013, 05:27 PM   #6
bcf
 
Drives: 2010 rs/ss a6
Join Date: Sep 2011
Location: Three Rivers, Michigan
Posts: 47
Thanks for the info guys
__________________
2010 2ss/rs,a6,tvs2300,rear od cog,texas speed vvt1 cam and springs,lt headers,no cats,xpipe,and gm performance mufflers,rx catch can,cai,zl1 fuel pump,adm fpcm,I.D.850 inj.,ls3 conversion,zr1 3bar map. 160 stat, Jannetty remote tune. BMR toe rods, trailing arms, lower control arms, sway bars. Lowering springs.
bcf is offline   Reply With Quote
Old 12-12-2013, 11:22 AM   #7
Steve@Vectormotorsports
 
Drives: Firehawk
Join Date: Jun 2009
Location: Port Huron
Posts: 211
We would be more than happy to assist you in your tuning needs, please give me a call at the shop

1-586-790-2970
Steve@Vectormotorsports is offline   Reply With Quote
Old 12-17-2013, 03:55 PM   #8
KMSRS2SS
I lurk
 
KMSRS2SS's Avatar
 
Drives: 2010 SS/RS
Join Date: Aug 2009
Location: MI.
Posts: 310
Vector is a great shop to work with, very pleased with the service!
__________________
460 at the wheel so far...

VMS Stage 2.5 Camshaft Kit- Comp cam LSA 114,227/239, .613 .623, RotoFab CAI, VMS ported intake manifold,Kooks 1 3/4" headers with HF cats, Corsa Catback, VMS custom dyno tune,TechAFX engine hose relocation kit, DSS 1400 hp axles, BMR toe rods and links, LS9 Clutch, Hurst short throw with roll out, Liberty Gear built tremec 6060.
KMSRS2SS is offline   Reply With Quote
Old 12-17-2013, 09:41 PM   #9
Mwalterhouse

 
Mwalterhouse's Avatar
 
Drives: 2010 Camaro SS/RS LS3
Join Date: Apr 2013
Location: Bloomfield Hills, Michigan
Posts: 1,053
Lidio at Alternative Auto in Chesterfield Twp north of Mt Clemens is one of the best, 485 rwhp with my cam modded LS3. Will be returning in the spring for my 3.91 gears.
Mwalterhouse is offline   Reply With Quote
Old 12-31-2013, 11:27 AM   #10
KristenLingenfelter
 
KristenLingenfelter's Avatar
 
Drives: ZL1 Camaro
Join Date: Jul 2011
Location: Decatur, Indiana
Posts: 60
We now have a shop in Metro Detroit - Beck Rd/96, right off the highway. Feel free to call Tim Dyer our sales Manager @ our main shop in Decatur, Indiana and he can answer any questions (260) 724-2552 ext. 1001. Thanks, Kristen www.lingenfelter.com
KristenLingenfelter is offline   Reply With Quote
Old 12-31-2013, 11:38 AM   #11
newagemuscle
Philippians 4:13
 
newagemuscle's Avatar
 
Drives: SLP Supercharged LS3
Join Date: Aug 2009
Location: The Motor City - Michigan
Posts: 2,518
Quote:
Originally Posted by Mwalterhouse View Post
Lidio at Alternative Auto in Chesterfield Twp north of Mt Clemens is one of the best, 485 rwhp with my cam modded LS3. Will be returning in the spring for my 3.91 gears.
__________________
newagemuscle is offline   Reply With Quote
Old 12-31-2013, 04:22 PM   #12
Skrail
 
Skrail's Avatar
 
Drives: 2011 Silver Convertible 1SS,
Join Date: Sep 2011
Location: kalamazoo,Mi
Posts: 64
I live just North of Kalamazoo. I used Jennetty also..Ted and the guys have helped a ton!!!
maybe we hook up this summer? I work in Elkhart and have a 10 SS vert.
Skrail is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:29 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.