Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Technical Camaro Topics > Wheels and Tires Talk Sponsored by The Tire Rack


Reply
 
Thread Tools
Old 08-27-2012, 08:56 PM   #1
Avalnch

 
Avalnch's Avatar
 
Drives: Rally Yellow Camaro+Avalanche
Join Date: Dec 2009
Location: Vancouver
Posts: 986
315 Square Setup

What would it take to run 315/35R19's on all four corners?

Edit...
Whoops, posted in wrong sub forum. Mods, please move to wheels&tires.
__________________
Vengeance Kaotik Cam, C.A.I., ARH LT, Pypes Cat Back, ZL1 Shifter, Quantum Brake Ducts, JDP Tow Hook
Scorch Yellow Trim Kit, Shark Fin, AAC DRLs+ABLs+SMDs, ZTA Rear Spoiler, R.Y. 1LE Splitter
Pfadt coilovers, camber plates, trailing arms & Hendrix offset differential bushings.
BMR adjustable toe-rods. Pedders ZL1 barz, rear cradle inserts, radius arm & steering rack bushings.
Hotchkis Max Chassis Brace
1LE 3.91 gearzzz. Drive Shaft Shop Road Race Axle Upgrade. TurnOne power steering pump.
447 HP @ 6180 RPM / 418 TQ @ 5100 RPM
Avalnch is offline   Reply With Quote
Old 08-27-2012, 09:26 PM   #2
600hp-lpe


 
Drives: 2010
Join Date: Jul 2009
Location: NH
Posts: 4,697
I run 315/35/18 hoosier's on the front.. they stick out 1"

19" will hit the fenders on the street
600hp-lpe is offline   Reply With Quote
Old 08-27-2012, 10:02 PM   #3
Avalnch

 
Avalnch's Avatar
 
Drives: Rally Yellow Camaro+Avalanche
Join Date: Dec 2009
Location: Vancouver
Posts: 986
I was hoping 19's would fit cause I drive out to my local events and am concerned about ground clearance.

What size 18" wheels do u run with your Hoosiers, if I may ask?

Quote:
Originally Posted by 600hp-lpe View Post
I run 315/35/18 hoosier's on the front.. they stick out 1"

19" will hit the fenders on the street
__________________
Vengeance Kaotik Cam, C.A.I., ARH LT, Pypes Cat Back, ZL1 Shifter, Quantum Brake Ducts, JDP Tow Hook
Scorch Yellow Trim Kit, Shark Fin, AAC DRLs+ABLs+SMDs, ZTA Rear Spoiler, R.Y. 1LE Splitter
Pfadt coilovers, camber plates, trailing arms & Hendrix offset differential bushings.
BMR adjustable toe-rods. Pedders ZL1 barz, rear cradle inserts, radius arm & steering rack bushings.
Hotchkis Max Chassis Brace
1LE 3.91 gearzzz. Drive Shaft Shop Road Race Axle Upgrade. TurnOne power steering pump.
447 HP @ 6180 RPM / 418 TQ @ 5100 RPM
Avalnch is offline   Reply With Quote
Old 08-28-2012, 12:07 AM   #4
JusticePete
CamaroCross Founder

 
JusticePete's Avatar
 
Drives: Camaro Justice
Join Date: Jun 2007
Location: Virginia
Posts: 17,031
Dan is spot on. We are running 305/35/20s on the L/28 from Lingenfelter and that rubber just clears. We have found that the sweetest setup is 305/30/19s, unless you go to slicks like Dan has in the 18" range.
JusticePete is offline   Reply With Quote
Old 08-28-2012, 05:51 AM   #5
600hp-lpe


 
Drives: 2010
Join Date: Jul 2009
Location: NH
Posts: 4,697
my tire sizes are in my signature.
wheel sizes are 18X11.5 front, 18X12.5 rear, made by CCW.
The 18's take a lot of work to fit, and are not recommended for street duty. With the short profile (25.6.height), they don't hit the fender.. but will hit the lower control arm, e-brake cables, and up front, hit the knuckle for the camber adjustment. All of these areas need to be modified to run wide 18 wheels.

What will fit your car on the street is a 19X10.5 with 305/35/19's.

I run 19X10 with 285/35/19 on the street (also my rain tires for autocross).
I went skinnier than the 305's for better wet traction, as i have the 18" slicks for dry.
600hp-lpe is offline   Reply With Quote
Old 08-28-2012, 07:27 PM   #6
Avalnch

 
Avalnch's Avatar
 
Drives: Rally Yellow Camaro+Avalanche
Join Date: Dec 2009
Location: Vancouver
Posts: 986
I can't believe there's no room to squeeze 315's up front (how bout on a 10" wide rim?). 305 is oh so close, but Hoosier doesn't make a 305/19 in any aspect.
__________________
Vengeance Kaotik Cam, C.A.I., ARH LT, Pypes Cat Back, ZL1 Shifter, Quantum Brake Ducts, JDP Tow Hook
Scorch Yellow Trim Kit, Shark Fin, AAC DRLs+ABLs+SMDs, ZTA Rear Spoiler, R.Y. 1LE Splitter
Pfadt coilovers, camber plates, trailing arms & Hendrix offset differential bushings.
BMR adjustable toe-rods. Pedders ZL1 barz, rear cradle inserts, radius arm & steering rack bushings.
Hotchkis Max Chassis Brace
1LE 3.91 gearzzz. Drive Shaft Shop Road Race Axle Upgrade. TurnOne power steering pump.
447 HP @ 6180 RPM / 418 TQ @ 5100 RPM
Avalnch is offline   Reply With Quote
Old 08-28-2012, 09:22 PM   #7
JusticePete
CamaroCross Founder

 
JusticePete's Avatar
 
Drives: Camaro Justice
Join Date: Jun 2007
Location: Virginia
Posts: 17,031
Quote:
Originally Posted by Avalnch View Post
I can't believe there's no room to squeeze 315's up front (how bout on a 10" wide rim?). 305 is oh so close, but Hoosier doesn't make a 305/19 in any aspect.
Rim width is critical in terms of handling a smaller tire stretched a bit tighter across the rim will handle better than a wider tire in a relaxed fit across a minimum rim width.
JusticePete is offline   Reply With Quote
Old 08-29-2012, 12:11 AM   #8
Avalnch

 
Avalnch's Avatar
 
Drives: Rally Yellow Camaro+Avalanche
Join Date: Dec 2009
Location: Vancouver
Posts: 986
Quote:
Originally Posted by JusticePete View Post
Rim width is critical in terms of handling a smaller tire stretched a bit tighter across the rim will handle better than a wider tire in a relaxed fit across a minimum rim width.
That's a great point, Pete. I was hoping someone out there has successfully fitted 19x11" rim up front for 315 Hoosiers. 315s out back is definitely no problem.
__________________
Vengeance Kaotik Cam, C.A.I., ARH LT, Pypes Cat Back, ZL1 Shifter, Quantum Brake Ducts, JDP Tow Hook
Scorch Yellow Trim Kit, Shark Fin, AAC DRLs+ABLs+SMDs, ZTA Rear Spoiler, R.Y. 1LE Splitter
Pfadt coilovers, camber plates, trailing arms & Hendrix offset differential bushings.
BMR adjustable toe-rods. Pedders ZL1 barz, rear cradle inserts, radius arm & steering rack bushings.
Hotchkis Max Chassis Brace
1LE 3.91 gearzzz. Drive Shaft Shop Road Race Axle Upgrade. TurnOne power steering pump.
447 HP @ 6180 RPM / 418 TQ @ 5100 RPM
Avalnch is offline   Reply With Quote
Old 08-29-2012, 10:35 PM   #9
JusticePete
CamaroCross Founder

 
JusticePete's Avatar
 
Drives: Camaro Justice
Join Date: Jun 2007
Location: Virginia
Posts: 17,031
I don't know of anyone running a 19x11, but I am quite sure Dave Schardt at Forgeline could do it.
JusticePete is offline   Reply With Quote
Old 08-30-2012, 12:18 AM   #10
Avalnch

 
Avalnch's Avatar
 
Drives: Rally Yellow Camaro+Avalanche
Join Date: Dec 2009
Location: Vancouver
Posts: 986
Quote:
Originally Posted by JusticePete View Post
I don't know of anyone running a 19x11, but I am quite sure Dave Schardt at Forgeline could do it.
Thanks, Pete. I'll definitely be having a chat with Dave.
__________________
Vengeance Kaotik Cam, C.A.I., ARH LT, Pypes Cat Back, ZL1 Shifter, Quantum Brake Ducts, JDP Tow Hook
Scorch Yellow Trim Kit, Shark Fin, AAC DRLs+ABLs+SMDs, ZTA Rear Spoiler, R.Y. 1LE Splitter
Pfadt coilovers, camber plates, trailing arms & Hendrix offset differential bushings.
BMR adjustable toe-rods. Pedders ZL1 barz, rear cradle inserts, radius arm & steering rack bushings.
Hotchkis Max Chassis Brace
1LE 3.91 gearzzz. Drive Shaft Shop Road Race Axle Upgrade. TurnOne power steering pump.
447 HP @ 6180 RPM / 418 TQ @ 5100 RPM
Avalnch is offline   Reply With Quote
Old 08-30-2012, 10:27 PM   #11
SUX2BU
Quit being a pu$$y
 
SUX2BU's Avatar
 
Drives: FAST
Join Date: Jan 2011
Location: Sachse TX (DFW)
Posts: 5,811
Quote:
Originally Posted by Avalnch View Post
That's a great point, Pete. I was hoping someone out there has successfully fitted 19x11" rim up front for 315 Hoosiers. 315s out back is definitely no problem.
You can do it easy, but they will stick out.
SUX2BU is offline   Reply With Quote
Old 09-05-2012, 12:25 AM   #12
JHart
I haz camaro again :)
 
JHart's Avatar
 
Drives: 2010 Chevrolet Camaro 1SS
Join Date: Mar 2009
Location: Union, South Carolina
Posts: 641
i wonder what wheel offset and width would be needed to fit a 305/35/20 up front? that filled out look would look amazing.
__________________
2010 Camaro 1SS(back in a camaro again, yessssss!)

2010 silverado z71 ccsb(sold, old dd)
2010 camaro1ss(sold, missed, will have another someday)
JHart is offline   Reply With Quote
Old 09-14-2012, 04:52 PM   #13
Avalnch

 
Avalnch's Avatar
 
Drives: Rally Yellow Camaro+Avalanche
Join Date: Dec 2009
Location: Vancouver
Posts: 986
Well, I had a chat with Dave Schardt at Forgeline and he says that a 19x11 with 315's is doable. This is preliminary and I'd be more comfortable talking to Dave some more and having him review the combined tire & wheel combo, but I am optimistic.
__________________
Vengeance Kaotik Cam, C.A.I., ARH LT, Pypes Cat Back, ZL1 Shifter, Quantum Brake Ducts, JDP Tow Hook
Scorch Yellow Trim Kit, Shark Fin, AAC DRLs+ABLs+SMDs, ZTA Rear Spoiler, R.Y. 1LE Splitter
Pfadt coilovers, camber plates, trailing arms & Hendrix offset differential bushings.
BMR adjustable toe-rods. Pedders ZL1 barz, rear cradle inserts, radius arm & steering rack bushings.
Hotchkis Max Chassis Brace
1LE 3.91 gearzzz. Drive Shaft Shop Road Race Axle Upgrade. TurnOne power steering pump.
447 HP @ 6180 RPM / 418 TQ @ 5100 RPM
Avalnch is offline   Reply With Quote
Old 09-14-2012, 05:21 PM   #14
pyr0b0y
need....more....hp
 
pyr0b0y's Avatar
 
Drives: The Neighbor Hater
Join Date: Dec 2010
Location: San Mateo, CA
Posts: 4,128
Quote:
Originally Posted by Avalnch View Post
Well, I had a chat with Dave Schardt at Forgeline and he says that a 19x11 with 315's is doable. This is preliminary and I'd be more comfortable talking to Dave some more and having him review the combined tire & wheel combo, but I am optimistic.
I'm running a set of Forgeline GA3R rims 19" on my car, I fit a 305 up front. You could get a 315 up front, but will have to double check, as it might not clean multiple parts like 600lpe mentioned.

Let us know what Dave says.
__________________


Mast Motorsports Built LS3 Stroker 418, IPS GT35R Twin Turbos, Exedy GTO4XD Twin Disc Clutch, Aeromotive A1000 Eliminator Stealth Fuel Pump, AEM Meth Injection, DSS 1400hp Axels, BC Coilovers, Pfadt & BMR Suspension, Hawk HPS Pads, Drilled/Slotted Rotors, Hurst Shifter, Custom Roll Cage by Blu808, T3 Ports, 22" Custom Concave Mesh Rims
pyr0b0y is offline   Reply With Quote
Old 09-15-2012, 01:27 AM   #15
Avalnch

 
Avalnch's Avatar
 
Drives: Rally Yellow Camaro+Avalanche
Join Date: Dec 2009
Location: Vancouver
Posts: 986
So, what's your 19" rim width?

Quote:
Originally Posted by pyr0b0y View Post
I'm running a set of Forgeline GA3R rims 19" on my car, I fit a 305 up front. You could get a 315 up front, but will have to double check, as it might not clean multiple parts like 600lpe mentioned.

Let us know what Dave says.
__________________
Vengeance Kaotik Cam, C.A.I., ARH LT, Pypes Cat Back, ZL1 Shifter, Quantum Brake Ducts, JDP Tow Hook
Scorch Yellow Trim Kit, Shark Fin, AAC DRLs+ABLs+SMDs, ZTA Rear Spoiler, R.Y. 1LE Splitter
Pfadt coilovers, camber plates, trailing arms & Hendrix offset differential bushings.
BMR adjustable toe-rods. Pedders ZL1 barz, rear cradle inserts, radius arm & steering rack bushings.
Hotchkis Max Chassis Brace
1LE 3.91 gearzzz. Drive Shaft Shop Road Race Axle Upgrade. TurnOne power steering pump.
447 HP @ 6180 RPM / 418 TQ @ 5100 RPM
Avalnch is offline   Reply With Quote
Old 09-19-2012, 11:15 AM   #16
JusticePete
CamaroCross Founder

 
JusticePete's Avatar
 
Drives: Camaro Justice
Join Date: Jun 2007
Location: Virginia
Posts: 17,031
Quote:
Originally Posted by Avalnch View Post
Well, I had a chat with Dave Schardt at Forgeline and he says that a 19x11 with 315's is doable. This is preliminary and I'd be more comfortable talking to Dave some more and having him review the combined tire & wheel combo, but I am optimistic.
Stay square with the 315s
JusticePete is offline   Reply With Quote
Old 09-19-2012, 09:29 PM   #17
Avalnch

 
Avalnch's Avatar
 
Drives: Rally Yellow Camaro+Avalanche
Join Date: Dec 2009
Location: Vancouver
Posts: 986
Thanks Pete. You're right cause this will allow rotating of the tires front/back (even though they'll need to be dismounted).
Quote:
Originally Posted by JusticePete View Post
Stay square with the 315s
__________________
Vengeance Kaotik Cam, C.A.I., ARH LT, Pypes Cat Back, ZL1 Shifter, Quantum Brake Ducts, JDP Tow Hook
Scorch Yellow Trim Kit, Shark Fin, AAC DRLs+ABLs+SMDs, ZTA Rear Spoiler, R.Y. 1LE Splitter
Pfadt coilovers, camber plates, trailing arms & Hendrix offset differential bushings.
BMR adjustable toe-rods. Pedders ZL1 barz, rear cradle inserts, radius arm & steering rack bushings.
Hotchkis Max Chassis Brace
1LE 3.91 gearzzz. Drive Shaft Shop Road Race Axle Upgrade. TurnOne power steering pump.
447 HP @ 6180 RPM / 418 TQ @ 5100 RPM
Avalnch is offline   Reply With Quote
Old 09-30-2012, 09:02 AM   #18
woodside783
Casey Woodside
 
woodside783's Avatar
 
Drives: a very fun car
Join Date: Jun 2010
Location: Tn
Posts: 1,873
Would a 18 10.5 fit with out any problems i have 18 9.5
__________________
Instagram @caseywoodside
http://youtu.be/CSc9aPh_X_w
woodside783 is offline   Reply With Quote
Old 09-30-2012, 12:05 PM   #19
Avalnch

 
Avalnch's Avatar
 
Drives: Rally Yellow Camaro+Avalanche
Join Date: Dec 2009
Location: Vancouver
Posts: 986
Quote:
Originally Posted by woodside783 View Post
Would a 18 10.5 fit with out any problems i have 18 9.5
Yes, 18 x 10.5 definitely will. Call Dave at Forgeline and tell him Tom sent you.
__________________
Vengeance Kaotik Cam, C.A.I., ARH LT, Pypes Cat Back, ZL1 Shifter, Quantum Brake Ducts, JDP Tow Hook
Scorch Yellow Trim Kit, Shark Fin, AAC DRLs+ABLs+SMDs, ZTA Rear Spoiler, R.Y. 1LE Splitter
Pfadt coilovers, camber plates, trailing arms & Hendrix offset differential bushings.
BMR adjustable toe-rods. Pedders ZL1 barz, rear cradle inserts, radius arm & steering rack bushings.
Hotchkis Max Chassis Brace
1LE 3.91 gearzzz. Drive Shaft Shop Road Race Axle Upgrade. TurnOne power steering pump.
447 HP @ 6180 RPM / 418 TQ @ 5100 RPM
Avalnch is offline   Reply With Quote
Old 09-30-2012, 12:38 PM   #20
JusticePete
CamaroCross Founder

 
JusticePete's Avatar
 
Drives: Camaro Justice
Join Date: Jun 2007
Location: Virginia
Posts: 17,031
for an 18 there is no reason you can't go to 11s.
JusticePete is offline   Reply With Quote
Old 09-30-2012, 06:15 PM   #21
woodside783
Casey Woodside
 
woodside783's Avatar
 
Drives: a very fun car
Join Date: Jun 2010
Location: Tn
Posts: 1,873
I am i won a door prize at the ls fest for forgeline. i have forgestar f14 on now and need to sale them. would like to go with the best set up for across
__________________
Instagram @caseywoodside
http://youtu.be/CSc9aPh_X_w
woodside783 is offline   Reply With Quote
Old 09-30-2012, 09:25 PM   #22
Avalnch

 
Avalnch's Avatar
 
Drives: Rally Yellow Camaro+Avalanche
Join Date: Dec 2009
Location: Vancouver
Posts: 986
Quote:
Originally Posted by woodside783 View Post
I am i won a door prize at the ls fest for forgeline. i have forgestar f14 on now and need to sale them. would like to go with the best set up for across
You're one lucky boy.
__________________
Vengeance Kaotik Cam, C.A.I., ARH LT, Pypes Cat Back, ZL1 Shifter, Quantum Brake Ducts, JDP Tow Hook
Scorch Yellow Trim Kit, Shark Fin, AAC DRLs+ABLs+SMDs, ZTA Rear Spoiler, R.Y. 1LE Splitter
Pfadt coilovers, camber plates, trailing arms & Hendrix offset differential bushings.
BMR adjustable toe-rods. Pedders ZL1 barz, rear cradle inserts, radius arm & steering rack bushings.
Hotchkis Max Chassis Brace
1LE 3.91 gearzzz. Drive Shaft Shop Road Race Axle Upgrade. TurnOne power steering pump.
447 HP @ 6180 RPM / 418 TQ @ 5100 RPM
Avalnch is offline   Reply With Quote
Old 10-01-2012, 09:38 AM   #23
woodside783
Casey Woodside
 
woodside783's Avatar
 
Drives: a very fun car
Join Date: Jun 2010
Location: Tn
Posts: 1,873
I will more than likely get your wheels but in flat black
__________________
Instagram @caseywoodside
http://youtu.be/CSc9aPh_X_w
woodside783 is offline   Reply With Quote
Old 10-01-2012, 09:44 AM   #24
JusticePete
CamaroCross Founder

 
JusticePete's Avatar
 
Drives: Camaro Justice
Join Date: Jun 2007
Location: Virginia
Posts: 17,031
Quote:
Originally Posted by woodside783 View Post
I will more than likely get your wheels but in flat black
Pictures
JusticePete is offline   Reply With Quote
Old 10-01-2012, 10:28 AM   #25
woodside783
Casey Woodside
 
woodside783's Avatar
 
Drives: a very fun car
Join Date: Jun 2010
Location: Tn
Posts: 1,873
It is going to be a while I have to sale my forgestar wheels and nitto tires first
__________________
Instagram @caseywoodside
http://youtu.be/CSc9aPh_X_w
woodside783 is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:35 AM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2015, vBulletin Solutions, Inc.