Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Circle-D
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Technical Camaro Topics > Suspension / Brakes / Chassis


Reply
 
Thread Tools
Old 09-02-2012, 03:20 PM   #35
Higgs Boson
in the ZL1 Market
 
Drives: 2014 C7; 2015 2500HD
Join Date: Jun 2012
Location: Texas Hill Country
Posts: 1,237
Quote:
Originally Posted by ChrisRav View Post
A stock 1LE should beat a stock SS in the quarter mile correct?
1LE may be slower...

stiffer suspension and possibly an extra shift before the finish line...

should get a jump on a highway pull but not really pull away.
Higgs Boson is offline   Reply With Quote
Old 09-02-2012, 03:21 PM   #36
2SS45th


 
2SS45th's Avatar
 
Drives: 11 Seconds or Faster
Join Date: May 2012
Location: Arvada, Colorado
Posts: 2,803
Quote:
Originally Posted by Higgs Boson View Post
1LE may be slower...

stiffer suspension and possibly an extra shift before the finish line...

should get a jump on a highway pull but not really pull away.
Higgs and I finally agree on something
__________________
I Ain't About That Stock Life.

2SS45th is offline   Reply With Quote
Old 09-02-2012, 03:30 PM   #37
JusticePete
 
JusticePete's Avatar
 
Drives: Camaro Justice
Join Date: Jun 2007
Location: Virginia
Posts: 17,601
It is true, you can get a suspension for less money than Pedders. It is also true you get what you pay for. Has anyone noticed that there is no other suspension company running a 5th Gen Street Car for the OPTIMA Challenge but Pedders and Pedders has TWO cars on track? Or that the ONLY two times a Pedders prepared car has been on a road course with brand-x we walked away from them by more than 5 seconds the first time and 8 seconds the second time? Or that Pedders prepared Camaros are beating Corvettes at the OPTIMA events? It isn't just the Lingenfelter L/28. Bruce Raymond's Camaro took 3rd place the first time he entered an event. When Chevrolet invited Pedders to the Milford Proving Grounds to work with them installing what would become the Pace Car Package for the INDY and NASCAR series on track Pace Cars they paid for the parts. Then there are the special Camaro featured in the 2011 SEMA brochures along with the Cruze and Sonic special builds that are all on Pedders.



Brembo, Hurst and Pedders. I'll take that all day long. Long story sort, you can buy suspension for less and follow Pedders or you can buy Pedders and lead the field.

Lingenfelter L/28 Camaro wins Optima Faceoff at Road America

Here are the official OPTIMA at Road America results:

Wilwood Disc Brakes Speed Stop Challenge
3 - #36 1966 Chevelle - Tom Farrington - 20.502
2 - #53 2010 LPE Camaro - Danny Popp - 20.453
1 - #43 2005 Porsche Carrera GT - Darren Draves - 20.394

RideTech Street Challenge Autocross
3 - #50 1933 Ford Roadster - Bret Voelkel - 41.585
2 - #53 2010 LPE Camaro - Danny Popp - 40.557
1 - #51 1967 Camaro - Britt Marloff - 40.310

BFGoodrich Hot Lap Challenge
3 - #51 1967 Camaro - Britt Marloff - 1:44.336
2 - #43 2005 Porsche Carrera - Darren Draves - 1:39.977
1 - #53 2010 LPE Camaro - Danny Popp - 1:39.412

OPTIMA Faceoff at Road America presented by Royal Purple (overall)
3 - #43 2005 Porsche Carrera - Darren Draves - 62 pts.
2 - #51 1967 Camaro - Britt Marloff - 68 pts.
Winner - #53 2010 LPE Camaro - Danny Popp - 74 pts.

Lingenfelter Performance Engineering's impressive L/28 Camaro is the overall winner of the OPTIMA(r) Faceoff at Road America, posting the event's fastest time in the BFGoodrich Hot Lap Challenge of 1:39.412 at the hands of driver Danny Popp. The modified 2010 Camaro L28 is used to develop and test Lingenfelter and partner company components. It is powered by a Lingenfelter 427 CID/7.0L crate engine.

Running the short course at Road America, the Camaro reached speeds in excess of 148 MPH and measured 1.35 Gs in the corners.

"As the only 5th Gen Camaro to win an OPTIMA event, we rose to the challenge and showed Road America spectators how our 681-horsepower Camaro can truly perform at the track," said Ken Lingenfelter, owner of Lingenfelter Performance Engineering. (photo by McGaffin Digital Photography) [7/11/2012]

Bill Goldberg Pod Cast

This



beat this.



Do we provide special support to our friends at LPE?



So as not to appear unfair, we always invite all the brand-x suspension companies to come out and join us at the OPTIMA Challenge Events. As we used to say at the Dog n Suds money talks and walks. Time to stop talking and come out and beat us.
JusticePete is offline   Reply With Quote
Old 09-02-2012, 04:18 PM   #38
Rob@WretchedMS
 
Drives: His Wife Crazy
Join Date: Jan 2008
Location: Silas Deane Auto,CT Name: Rob Anderson
Posts: 1,787
Well said.
Rob@WretchedMS is offline   Reply With Quote
Old 09-02-2012, 06:09 PM   #39
bannonm

 
bannonm's Avatar
 
Drives: 2011 2SS/RS M6 VR
Join Date: Aug 2011
Location: Chicagoland
Posts: 1,516
Quote:
Originally Posted by Synner View Post
And you're forgetting about the wheel bearings, gears, wheels/tires, revised transmission, etc.

The likelihood you could achieve those same things and benefits aftermarket for that price is slim to none. The 1LE would still outhandle your "package" because of the wheels/tires alone. Obviously it can be improved upon with aftermarket parts but the fundamental package is still a great buy for the true road race enthusiast.
The 1LE is a great bargain for what you get. But to say the 1LE will still outhandle a modded SS is wrong. Aside from the transmission and gears I have a setup on my SS that would likely outperform the stock 1LE in handling. The ONLY thing I need to change is to the newer sway bar setup and those aftermarket setups are still better than even the ZL1 stiffness.

Bigger axles, hubs are nice to have but not going to make you go faster or handle better. How much better the 3.93 will help on the track is still to be seen. Yeah, you'll take off great from a stop but I run in 3rd & 4th on the track. Is that trans/gear setup going to improve my times by a second or two, or fifteen seconds a lap?

If I could start over I would definitely buy a 1LE over an SS since I track. But I would probably do the same mods I did to my SS minus the wheels since the 1LE has the wider tires. Sounds like GM did a nice job on the 1LE, but there's still plenty of room for improvement.
__________________
bannonm is offline   Reply With Quote
Old 09-02-2012, 06:57 PM   #40
JusticePete
 
JusticePete's Avatar
 
Drives: Camaro Justice
Join Date: Jun 2007
Location: Virginia
Posts: 17,601
  • FE6 suspension package which includes thicker front and rear sway bars, a strut tower brace, toe links, rear shock mounts, monotube dampers
  • Upgraded half-shafts and wheel bearings sourced from the ZL1
  • 20-inch wheels wrapped with Goodyear Eagle F1 SuperCar
  • 3.91:1 rear-axle ratio
  • Close-ratio v
  • Tremec six-speed manual transmission with transmission cooler and high-flow fuel pump.

These are solid upgrades to the SS. The 3.91 with require an extra shift on some straights, but the extra shift is more than offset by the overall performance. Couple that with a close ration gear box and the 1LE is golden on track. I say this because we have run multiple variations of the gear and trannies since 2009. Give Chevrolet

The absence of a differential cooler

Improved half-shaft and bearings get

The wheels and tires are a plus from the SS but far from the ideal setup due to crash test standards and the range of ride height acceptable with out re-validating the crash testing

FE6 is another huge plus, but are not adjustable in height or damping

Four pot fronts instead of ZL1 six pots

The 1LE is a great car for the occasional HPDE. For the hardcore road course owner you get more than enough good stuff to go with your after market and OEM based upgrades.
JusticePete is offline   Reply With Quote
Old 09-02-2012, 07:10 PM   #41
Synner


 
Drives: 2011 2SS/RS M6
Join Date: May 2011
Location: US
Posts: 3,967
Quote:
Originally Posted by bannonm View Post
The 1LE is a great bargain for what you get. But to say the 1LE will still outhandle a modded SS is wrong. Aside from the transmission and gears I have a setup on my SS that would likely outperform the stock 1LE in handling. The ONLY thing I need to change is to the newer sway bar setup and those aftermarket setups are still better than even the ZL1 stiffness.

Bigger axles, hubs are nice to have but not going to make you go faster or handle better. How much better the 3.93 will help on the track is still to be seen. Yeah, you'll take off great from a stop but I run in 3rd & 4th on the track. Is that trans/gear setup going to improve my times by a second or two, or fifteen seconds a lap?

If I could start over I would definitely buy a 1LE over an SS since I track. But I would probably do the same mods I did to my SS minus the wheels since the 1LE has the wider tires. Sounds like GM did a nice job on the 1LE, but there's still plenty of room for improvement.
I didn't say any modded SS, I said the mods the other person listed. Also there's more to be said than ultimate speed, there's durability and repeatability to consider which the cooler and bearings address. It's the difference between having a car made for on ramps and a car made for the track.
Synner is offline   Reply With Quote
Old 09-02-2012, 07:18 PM   #42
blackswan

 
blackswan's Avatar
 
Drives: Yes
Join Date: Oct 2011
Location: Nearby
Posts: 1,204
Is the 1LE reasonable for a DD? Important to consider.
blackswan is online now   Reply With Quote
Old 09-02-2012, 07:23 PM   #43
JusticePete
 
JusticePete's Avatar
 
Drives: Camaro Justice
Join Date: Jun 2007
Location: Virginia
Posts: 17,601
Quote:
Originally Posted by blackswan View Post
Is the 1LE reasonable for a DD? Important to consider.
Yes.
JusticePete is offline   Reply With Quote
Old 09-02-2012, 08:51 PM   #44
bannonm

 
bannonm's Avatar
 
Drives: 2011 2SS/RS M6 VR
Join Date: Aug 2011
Location: Chicagoland
Posts: 1,516
Quote:
Originally Posted by Synner View Post
I didn't say any modded SS, I said the mods the other person listed. Also there's more to be said than ultimate speed, there's durability and repeatability to consider which the cooler and bearings address. It's the difference between having a car made for on ramps and a car made for the track.
No you didn't, but he did and you made the statement "your package." So what was his package being installed on then?

Who said anything about "ultimate" speed? My comments were about handling. I pretty much know the difference between on ramps and tracking. My car has spent more miles this summer on the track than on the street.
__________________
bannonm is offline   Reply With Quote
Old 09-03-2012, 07:56 AM   #45
blackswan

 
blackswan's Avatar
 
Drives: Yes
Join Date: Oct 2011
Location: Nearby
Posts: 1,204
But you're in TX!

Roads here in New England suck!
blackswan is online now   Reply With Quote
Old 09-03-2012, 08:32 AM   #46
L99CAMA2011


 
L99CAMA2011's Avatar
 
Drives: One of the baddest handling Gen 5s
Join Date: Feb 2011
Location: Masachusetts
Posts: 3,441
Quote:
Originally Posted by JusticePete View Post
  • FE6 suspension package which includes thicker front and rear sway bars, a strut tower brace, toe links, rear shock mounts, monotube dampers
  • Upgraded half-shafts and wheel bearings sourced from the ZL1
  • 20-inch wheels wrapped with Goodyear Eagle F1 SuperCar
  • 3.91:1 rear-axle ratio
  • Close-ratio v
  • Tremec six-speed manual transmission with transmission cooler and high-flow fuel pump.

These are solid upgrades to the SS. The 3.91 with require an extra shift on some straights, but the extra shift is more than offset by the overall performance. Couple that with a close ration gear box and the 1LE is golden on track. I say this because we have run multiple variations of the gear and trannies since 2009. Give Chevrolet

The absence of a differential cooler

Improved half-shaft and bearings get

The wheels and tires are a plus from the SS but far from the ideal setup due to crash test standards and the range of ride height acceptable with out re-validating the crash testing

FE6 is another huge plus, but are not adjustable in height or damping

Four pot fronts instead of ZL1 six pots

The 1LE is a great car for the occasional HPDE. For the hardcore road course owner you get more than enough good stuff to go with your after market and OEM based upgrades.
I wonder if we would be able to transplant these parts onto our SS non 1LEs. Get the 1LE diff and have a diff cooler setup made and installed, this may be possible. I may be wrong but isn't hotter diff temps going to bring on torque management sooner than having the diff cooled with the cooler in place.
L99CAMA2011 is offline   Reply With Quote
Old 09-03-2012, 08:37 AM   #47
L99CAMA2011


 
L99CAMA2011's Avatar
 
Drives: One of the baddest handling Gen 5s
Join Date: Feb 2011
Location: Masachusetts
Posts: 3,441
Quote:
Originally Posted by blackswan View Post
But you're in TX!

Roads here in New England suck!
Blackswan I live in Mass as well and my car now is probably stiffer than the 1LE. It's NY and NJ that will have you wanting an extra A$#$#S.
L99CAMA2011 is offline   Reply With Quote
Old 09-03-2012, 08:56 AM   #48
L99CAMA2011


 
L99CAMA2011's Avatar
 
Drives: One of the baddest handling Gen 5s
Join Date: Feb 2011
Location: Masachusetts
Posts: 3,441
Quote:
Originally Posted by Hotchkis View Post
Your other option to get 1LE levels of handling for your SS would be to look at our 2010+ Camaro Race Pack Stage 3 Total Vehicle System (TVS). This kit includes Sport Coil Springs, Front Sway Bar, Adjustable Rear Sway Bar, Front and Rear Heavy Duty Adjustable End Links, Strut Tower Brace, and Chassis Brace. These parts are designed to compliment each other and give you a matched suspension setup that works right out of the box. And even better, all of this engineering is available for under $2500.



Check out what Autoblog and Road and Track have to say about how the handling of a Hotchkis-equipped Camaro compares to stock:

http://www.autoblog.com/2010/03/12/h...r-than-before/

http://www.hotchkis.net/_uploaded_fi...5thgen_zz1.pdf
Hotchkis guys no offense but I wouldn't substitute any FE3 rear bar setup for even the stock ZL-1 bar. I had your rear 35mm bar and the ZL-1 rear 28 is superior sorry. You need to upgrade your rear bar.
L99CAMA2011 is offline   Reply With Quote
Old 09-03-2012, 09:01 AM   #49
L99CAMA2011


 
L99CAMA2011's Avatar
 
Drives: One of the baddest handling Gen 5s
Join Date: Feb 2011
Location: Masachusetts
Posts: 3,441
Quote:
Originally Posted by Higgs Boson View Post
1LE may be slower...

stiffer suspension and possibly an extra shift before the finish line...

should get a jump on a highway pull but not really pull away.
I'd say quicker E.T with lower trap speed =1LE.
L99CAMA2011 is offline   Reply With Quote
Old 09-03-2012, 09:23 AM   #50
L99CAMA2011


 
L99CAMA2011's Avatar
 
Drives: One of the baddest handling Gen 5s
Join Date: Feb 2011
Location: Masachusetts
Posts: 3,441
PORSCHE CARERRA GT SPECS. Max speed 334 kph (207.08 mph) 0 - 100 kph 3.5 s 0 - 180 kph 7.6 s 0 - 200 kph 9.9 s 0 - 250 kph 17.2 s 0 - 300 kph 34.2 s 0 - 100 mph 6.5 s 1000 m 19.4 s @ 266 kph 1/4 mile 11.0 s 0 - 100 - 0 mph 11.3 s
L99CAMA2011 is offline   Reply With Quote
Old 09-03-2012, 09:53 AM   #51
Higgs Boson
in the ZL1 Market
 
Drives: 2014 C7; 2015 2500HD
Join Date: Jun 2012
Location: Texas Hill Country
Posts: 1,237
Quote:
Originally Posted by L99CAMA2011 View Post
I'd say quicker E.T with lower trap speed =1LE.
I agree if the ss and 1le both run sticky tires.....not on street tires.
Higgs Boson is offline   Reply With Quote
 
Reply

Tags
1le, airlift, bagged, handling, pedders

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:30 PM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2016, vBulletin Solutions, Inc.