Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
LSR Performance
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > General Camaro Forums > Camaro ZL1 Forum - ZL1 Specific Topics

Camaro ZL1 Forum - ZL1 Specific Topics Camaro ZL1 specific topics

Reply
 
Thread Tools
Old 09-21-2012, 06:53 AM   #1
Stephen12ZL1

 
Stephen12ZL1's Avatar
 
Drives: 2012 ZL1
Join Date: May 2012
Location: Mechanicsville VA
Posts: 1,909
Nice gear puller for lower pulley by Blue Point(Snap-on)

I removed the lower pulley yesterday using a Blue Point(Snap On) puller. Check out the design as it was really nice and worked great. It uses these little rods in the center where the crank is hollow for the center bolt on the puller to press. I used the longest rod for the LSA and the little claws grip in the normal arrangement as there are three depressed areas on the back of the pulley for the claws to engage perfectly. I borrowed this tool from my local mechanic that stated that this was originally made for a 3.5L Chrysler pulley and they found it worked perfectly for all LS motors as well. Here are a couple pics. I am going to install the ATI/Lingenfelter lower pulley today with a 9.55 lower ring. At this point I am not going to touch the upper pulley and snout.
Attached Images
  
__________________
#917 A6. 10.67@126.2 1.53 60' ATI/Lingenfelter balancer (10" ring), stock upper pulley, 90mm TB, ID850s,Rotofab/Lingenfelter intercooler reservoir, Cooler Logic HX, Lingenfelter idler relocation bracket, NGK TR7ix, 160 t-stat, Dewitts Radiator, Texas Speed 1 7/8" headers(no cats). M&H drag radials 325/45-17 & M&H 28x4.5" bias skinnies. Tuning by Frost at Performance Autosport in Richmond, VA (804) 358-2505
Stephen12ZL1 is offline   Reply With Quote
Old 09-21-2012, 11:31 AM   #2
gs-63
 
Drives: Camaro
Join Date: Mar 2012
Location: Québec, Canada
Posts: 47
What is the part number for this puller?
gs-63 is offline   Reply With Quote
Old 09-21-2012, 12:41 PM   #3
Stephen12ZL1

 
Stephen12ZL1's Avatar
 
Drives: 2012 ZL1
Join Date: May 2012
Location: Mechanicsville VA
Posts: 1,909
not sure the part # because I already returned it...but ebay has a bunch of them for approx $80 http://www.ebay.com/itm/Automotive-H...a19db5&vxp=mtr

Like this one.
__________________
#917 A6. 10.67@126.2 1.53 60' ATI/Lingenfelter balancer (10" ring), stock upper pulley, 90mm TB, ID850s,Rotofab/Lingenfelter intercooler reservoir, Cooler Logic HX, Lingenfelter idler relocation bracket, NGK TR7ix, 160 t-stat, Dewitts Radiator, Texas Speed 1 7/8" headers(no cats). M&H drag radials 325/45-17 & M&H 28x4.5" bias skinnies. Tuning by Frost at Performance Autosport in Richmond, VA (804) 358-2505
Stephen12ZL1 is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:56 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.