Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
HRE Wheels
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > General Camaro Forums > Camaro ZL1 Forum - ZL1 Specific Topics


Reply
 
Thread Tools
Old 09-25-2012, 07:39 PM   #1
2012 ZL1#1658
 
2012 ZL1#1658's Avatar
 
Drives: 2012 Camaro ZL1 #1658
Join Date: Jul 2010
Location: Pennsauken, NJ
Posts: 595
RX Catch Can with Dual Check Valve

Has anyone installed the RX Catch Can with Dual Check Valve for their ZL1? I bought one and it did not have instructions to go with it. I am not the most mechanically inclined person out there but the instructions I found on the website were not very user friendly. I'd appreciate the feedback.
2012 ZL1#1658 is offline   Reply With Quote
Old 09-25-2012, 07:44 PM   #2
BonestockZL1
 
BonestockZL1's Avatar
 
Drives: 2012 ZL1 Camaro
Join Date: May 2012
Location: PA
Posts: 181
I bought one, but haven't installed it yet. I saw that in the instructions you have to tap into the air inlet pipe. I just installed a Roto Fab intake and there is no way I am drilling a hole it the pipe!

Right now it's just sitting on my bench. Would like to know too how other people installed the dual can on there ZL1.
__________________
BonestockZL1 is offline   Reply With Quote
Old 09-25-2012, 07:50 PM   #3
spike III
COTW 6/25/12
 
spike III's Avatar
 
Drives: 2011 1SS/RS IBM Camaro
Join Date: Jan 2011
Location: Chittenango, NY, USA
Posts: 3,904
If you pm RX Catch Can they will tell you exactly what to do
__________________
spike III is offline   Reply With Quote
Old 09-25-2012, 08:27 PM   #4
Jayrcr3

 
Jayrcr3's Avatar
 
Drives: 2011 IOM 2SS/RS
Join Date: Dec 2010
Location: Chatham, Illinois
Posts: 757
Yep, I just dealt with them on a different issue. They were great to deal with. They went above and beyond in taking care of my problem. Give them a call or shoot them an email, they will get you fixed right up.

Sent from my HTC One X using Tapatalk 2
__________________
American Racing 1 7/8" Headers and Hi-Flow Cats, CAI cold air intake, Flowmaster AT exhaust, Vengeance Racing Stage 2 cam, VMax ported throttle body, TEA valve springs and titanium retainers, Trick Flow hardened pushrods, 180* T-stat, Comp Trunion kit, ZL1 Fuel Pump, ADM Fuel Pump Control Module, 20% window tint, Whipple Supercharger. Tuned by Mike Norris Motorsports. 656rwhp/584rwtq @10 PSI.
Jayrcr3 is offline   Reply With Quote
Old 09-25-2012, 11:33 PM   #5
hognutz


 
hognutz's Avatar
 
Drives: 2013 ZL1
Join Date: Oct 2011
Location: tangent or
Posts: 2,977
I will be in the next day or two. maybe I will take pictures and put a DIY up. I have seen this question come up quite a few times.

I ordered the dual valve so I know where to hook in with the single value but I don't know the exact location for the second valve hookup.
__________________
2017 zl1 or GT350 hmmmm
2015 Hellcat-sold
2013 ZL1 -sold
2013 Dart
2013 Megacab 8" lift 38"mt's
hognutz is offline   Reply With Quote
Old 09-26-2012, 04:13 AM   #6
2012 ZL1#1658
 
2012 ZL1#1658's Avatar
 
Drives: 2012 Camaro ZL1 #1658
Join Date: Jul 2010
Location: Pennsauken, NJ
Posts: 595
Quote:
Originally Posted by hognutz View Post
I will be in the next day or two. maybe I will take pictures and put a DIY up. I have seen this question come up quite a few times.

I ordered the dual valve so I know where to hook in with the single value but I don't know the exact location for the second valve hookup.
2012 ZL1#1658 is offline   Reply With Quote
Old 09-27-2012, 12:16 PM   #7
hognutz


 
hognutz's Avatar
 
Drives: 2013 ZL1
Join Date: Oct 2011
Location: tangent or
Posts: 2,977
Okay did the install last night. here is the nuts and bolts of it.

1. the braket goes beween the shroud and radiator with the bend facing the passenger side.
2. the bolt is too short so you need to swap that bolt for the one on the radiator support above it.
3. there is paint in the threads ont he catch can most likley so make sure you run the bolts in bfore you try to thread on the brackt.
4. locate the valley vent to vacuum tube under the bypass valve actuator and remove it.
5. the center port goes to the crankcase or vally tube. the lowest tube below the TB.
6. the port closest to the engine goes to vaccum wich is the upper port.
the port closet to the radiator goes to the a barb fitting supplied mounted int he intake tube.

I will have pictures later I am going to write up a word doc and send it to them just because there's is kind of at level that some will struggle with. and there just show pictures of the barb fitting mounted int here optional tube. A simple picture with the ports on each labbled a, b, c or something like that would really clear this up for people. Also instruction about mounting the barb in the oem tube will clear confusion up.
Attached Images
    
__________________
2017 zl1 or GT350 hmmmm
2015 Hellcat-sold
2013 ZL1 -sold
2013 Dart
2013 Megacab 8" lift 38"mt's

Last edited by hognutz; 09-27-2012 at 09:44 PM.
hognutz is offline   Reply With Quote
Old 09-27-2012, 12:18 PM   #8
hognutz


 
hognutz's Avatar
 
Drives: 2013 ZL1
Join Date: Oct 2011
Location: tangent or
Posts: 2,977
Quote:
Originally Posted by BonestockZL1 View Post
I bought one, but haven't installed it yet. I saw that in the instructions you have to tap into the air inlet pipe. I just installed a Roto Fab intake and there is no way I am drilling a hole it the pipe!

Right now it's just sitting on my bench. Would like to know too how other people installed the dual can on there ZL1.
it does require tapping into the intake tupe. it is just a pipe tap so my .02 would be do it and you could always use a flush allen style pipe plug to go back.
__________________
2017 zl1 or GT350 hmmmm
2015 Hellcat-sold
2013 ZL1 -sold
2013 Dart
2013 Megacab 8" lift 38"mt's
hognutz is offline   Reply With Quote
Old 10-22-2012, 09:08 AM   #9
2012 ZL1#1658
 
2012 ZL1#1658's Avatar
 
Drives: 2012 Camaro ZL1 #1658
Join Date: Jul 2010
Location: Pennsauken, NJ
Posts: 595
Quote:
Originally Posted by hognutz View Post
it does require tapping into the intake tupe. it is just a pipe tap so my .02 would be do it and you could always use a flush allen style pipe plug to go back.
Awesome. Thanks for this.
2012 ZL1#1658 is offline   Reply With Quote
Old 10-22-2012, 09:24 AM   #10
Joebot8484
ZL1 # 1307
 
Joebot8484's Avatar
 
Drives: 2012 Camaro ZL1, 2008 Hummzilla H3
Join Date: Nov 2010
Location: Central New York
Posts: 1,896
Great pic's, I have mine on the bench right now also. I'm waiting on my new Intake so i don't have to tap a hole into the stock pipe.
__________________
Click on my signature for my build thread
Joebot8484 is offline   Reply With Quote
Old 10-22-2012, 10:26 AM   #11
69NMYSS

 
69NMYSS's Avatar
 
Drives: '69 Camaro SS and '12 ZL1
Join Date: Sep 2011
Location: CA
Posts: 1,274
What is the difference between the dual and single valve? I was under the impression the single valve catch cans were to be used?
__________________
69NMYSS is offline   Reply With Quote
Old 10-22-2012, 11:07 AM   #12
zfuzz
 
zfuzz's Avatar
 
Drives: 69 Z28 / 12 ZL1
Join Date: Nov 2011
Location: Tennessee
Posts: 367
Does it matter how long the hoses are?
Does the elevation of the catch can in relation to the valley ports matter?

I want to install one of the RX cans but mounting it to the radiator or anywhere in the engine bay just adds to the "octopus" look under the hood.

I would like to mount it somewhere low between the radiator and the front grill, if hose length and elevation is not factor. Any thoughts ?
__________________
zfuzz is offline   Reply With Quote
Old 10-22-2012, 11:27 AM   #13
ZL1Bullet
 
ZL1Bullet's Avatar
 
Drives: ZL1
Join Date: Jun 2012
Location: London, Ontario
Posts: 142
Quote:
Originally Posted by 69NMYSS View Post
What is the difference between the dual and single valve? I was under the impression the single valve catch cans were to be used?
I talked with the engineer who designed this catch can. He said the single valve was good to use on the ZL1. He said the double valve was nice but not necessary. I ordered the single.
__________________
2013 Ashen Grey ZL1, exposed Carbon Fibre insert, Sun Roof, Bright Wheels, NAV Radio

ZL1Bullet is offline   Reply With Quote
Old 10-22-2012, 12:51 PM   #14
hognutz


 
hognutz's Avatar
 
Drives: 2013 ZL1
Join Date: Oct 2011
Location: tangent or
Posts: 2,977
Quote:
Originally Posted by 69NMYSS View Post
What is the difference between the dual and single valve? I was under the impression the single valve catch cans were to be used?

the dual valve catch can will allow for some crankcase evacuation at WOT is what they told me.

I just called RX direclty and that is what they recomended for the ZL1. it is not required just recomended. I am going to be addeding boost at some point so i just went with it.
__________________
2017 zl1 or GT350 hmmmm
2015 Hellcat-sold
2013 ZL1 -sold
2013 Dart
2013 Megacab 8" lift 38"mt's
hognutz is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:43 AM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2016, vBulletin Solutions, Inc.