Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
autoguy
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > General Camaro Forums > Camaro ZL1 Forum - ZL1 Specific Topics

Camaro ZL1 Forum - ZL1 Specific Topics Camaro ZL1 specific topics

Reply
 
Thread Tools
Old 10-13-2012, 12:14 AM   #1
ZL1 Spoked

 
ZL1 Spoked's Avatar
 
Drives: 2013 Camaro ZL1 M6
Join Date: Aug 2012
Location: Bay Area CA
Posts: 1,048
My ZL1 is at 604 RWHP and 608 FT/LBS. HELP

Just got her back from the shop, fresh tune and some bolt-ons. She ran at 604 RWHP and 608 LBS of torque. My question is, what times can I expect in the quarter mile, I may go to my first track meet Wednesday.

I'll be posting the Dyno sheet soon, I was so amazed how fast it became with very little Mods. I only put about $4000 into it, parts,labor, tune, Dyno.

BTW, I drive an M6 so some skill will be required to get a good time, what can I expect to run?
__________________
-2013 Camaro ZL1-Black Stripe Package-Ambient Light Kit-Subwoofer Package-Sunroof-Suede Package-NAV MYLINK-MANUAL BABY-Dual Vented Fenders-Exposed Carbon Fiber Insert
-Black 10 Spoke Wheels

604 RWHP 602 LBS/TQ
ZL1 Spoked is offline   Reply With Quote
Old 10-13-2012, 12:26 AM   #2
LimaCharlie


 
LimaCharlie's Avatar
 
Drives: 2011 Camaro SS/RS - 2004 Silverado
Join Date: Mar 2010
Location: Tucson, AZ
Posts: 2,623
I assume you're going to Sonoma/Infineon? That's a good sea level track.
Are you running stock wheels/tires? If so, I'm guessing mid 11's @ ~120 MPH.
__________________
2011 Summit White Camaro 1SS/RS
-6.2 LS3, TR6060, 3.45, G80

2004 Black Silverado 1500 2WD Regular Cab, Short Bed
-5.3 LM7, 4L60E, 3.42, G80
LimaCharlie is offline   Reply With Quote
Old 10-13-2012, 12:34 AM   #3
ZL1 Spoked

 
ZL1 Spoked's Avatar
 
Drives: 2013 Camaro ZL1 M6
Join Date: Aug 2012
Location: Bay Area CA
Posts: 1,048
Quote:
Originally Posted by LimaCharlie View Post
I assume you're going to Sonoma/Infineon? That's a good sea level track.
Are you running stock wheels/tires? If so, I'm guessing mid 11's @ ~120 MPH.

Yup sorry forgot to mention stock wheels, Ill be ordering slicks soon so I would think I'd be able to get into the 10's?
__________________
-2013 Camaro ZL1-Black Stripe Package-Ambient Light Kit-Subwoofer Package-Sunroof-Suede Package-NAV MYLINK-MANUAL BABY-Dual Vented Fenders-Exposed Carbon Fiber Insert
-Black 10 Spoke Wheels

604 RWHP 602 LBS/TQ
ZL1 Spoked is offline   Reply With Quote
Old 10-13-2012, 04:55 AM   #4
Stephen12ZL1

 
Stephen12ZL1's Avatar
 
Drives: 2012 ZL1
Join Date: May 2012
Location: Mechanicsville VA
Posts: 2,004
list your mods....with 604hp, decent weather, and a sticky track you are knocking on 10's door.
__________________
#917 A6. 10.67@126.2 1.53 60' ATI/Lingenfelter balancer (10" ring), stock upper pulley, 90mm TB, ID850s,Rotofab/Lingenfelter intercooler reservoir, Cooler Logic HX, Lingenfelter idler relocation bracket, NGK TR7ix, 160 t-stat, Dewitts Radiator, Texas Speed 1 7/8" headers(no cats). M&H drag radials 325/45-17 & M&H 28x4.5" bias skinnies. Tuning by Frost at Performance Autosport in Richmond, VA (804) 358-2505
Stephen12ZL1 is offline   Reply With Quote
Old 10-13-2012, 01:13 PM   #5
Nemisis
 
Drives: 2013 Ashen Gray Metallic-M6
Join Date: Aug 2012
Location: Artesia, NM
Posts: 174
Yes, mods would be nice
Nemisis is offline   Reply With Quote
Old 10-13-2012, 02:30 PM   #6
JFWJR179
 
JFWJR179's Avatar
 
Drives: 2013 Camaro ZL1 Convertible
Join Date: Aug 2012
Location: Memphis, TN
Posts: 304
Quote:
Originally Posted by ZL1 Spoked View Post
Just got her back from the shop, fresh tune and some bolt-ons. She ran at 604 RWHP and 608 LBS of torque. My question is, what times can I expect in the quarter mile, I may go to my first track meet Wednesday.

I'll be posting the Dyno sheet soon, I was so amazed how fast it became with very little Mods. I only put about $4000 into it, parts,labor, tune, Dyno.

BTW, I drive an M6 so some skill will be required to get a good time, what can I expect to run?
604 RWHP is very good for only around $4,000 total cost.

Assuming around 500 RWHP is bone stock, it cost you around $40 per RWHP to bring it up to 604 RWHP.

What is the name/location of the shop/company that did the work & tune ?
JFWJR179 is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:20 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.