Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
HeadlightArmor
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Marketplace > Sponsors Classifieds Marketplace > V8 Bolt-Ons & Tunes

View our official forum sponsors list.

Reply
 
Thread Tools
Old 01-31-2015, 12:45 PM   #1
JDP Tyler

 
JDP Tyler's Avatar
 
Drives: Chevys at the limit
Join Date: Nov 2010
Location: SLC, UT
Posts: 8,070
Thumbs up Headers Headers HEADERS! | SS/1LE/ZL1 | BEST Prices - FREE Shipping | JDP Motorsports

JDP Motorsports is proud to offer a variety of header options for your Camaro!



American Racing Headers - 1 3/4" x 2 1/2" Shorty Headers - 2010-2015 Camaro SS - CA2010SH

American Racing Headers including shorty headers for the 2010-2015 Camaro SS features 304 stainless steel 1 3/4" primaries, 2 1/2" merge collectors, and new American Racing Headers wire insulators, along with all the necessary hardware and gaskets for a bolt-on installation.

The 2010-2015 Camaro SS American Racing Headers were designed to bolt-on to your factory cats. Some modification may be required.

Dyno tested by American Racing Headers on a stock Camaro SS L99 resulting in gains of 12 RWHP and 15 RWTQ.

Product Features
- Tig welded 304 stainless steel
- 1-Piece mandrel-bent primary tubes
- Merge collector spike for better scavenging
- 3/8" ball flange collector for great leak free performance
- Includes new ARH wire insulators
- Gaskets and hardware included for a complete installation
- Free Shipping to the Lower 48!
- Made in the USA!!

American Racing Headers - 1 7/8" x 3" Long Tube Headers Short System - 2010-2015 Camaro SS - CA78SH
American Racing Headers - 2" x 3" Long Tube Headers Short System - 2010-2015 Camaro SS - CA2SH

American Racing Headers including long tube headers and x-pipe for the 2010-2015 Camaro SS features 304 stainless steel 1 7/8" or 2" primaries, 3" merge collectors, and 3" x-pipe, along with all the necessary hardware and gaskets for a bolt-on installation.

The 2010-2015 Camaro SS American Racing Headers were designed to bolt-on to your factory axle-back or any aftermarket axle-back. Some modification may be required. The American Racing headers have a crossover x-pipe assembly and they are offered with or without converters.

The 1-7/8" headers were dyno tested by American Racing Headers to show gains of 32 RWHP without a tune and 50 RWHP with a tune. The RWTQ was up to 45 ft. lbs after the tune.

Product Features
- Tig welded 304 stainless steel
- 1-Piece mandrel-bent primary tubes
- Merge collector spike for better scavenging
- Welded o2 bungs with o2 extenders
- 200 cell metallic substrate cats
- Gaskets and hardware included for a complete installation
- Free Shipping to the Lower 48!
- Made in the USA!!

American Racing Headers - 1 7/8" x 3" Long Tube Headers w/3" X-Pipe - 2010-2015 Camaro SS - CA201078
American Racing Headers - 2" x 3" Long Tube Headers w/3" X-Pipe - 2010-2015 Camaro SS - CA20102



American Racing Headers including long tube headers and x-pipe for the 2010-2015 Camaro SS features 304 stainless steel 1-7/8" or 2" primaries, 3" merge collectors, and 3" x-pipe, along with all the necessary hardware and gaskets for a bolt-on installation.

The 2010-2015 Camaro SS American Racing Headers were designed to bolt-on to your factory axle-back or any aftermarket axle-back. Some modification may be required. The American Racing headers have a crossover x-pipe assembly and they are offered with or without converters.

Product Features
- Tig welded 304 stainless steel
- 1-Piece mandrel-bent primary tubes
- Merge collector spike for better scavenging
- Welded o2 bungs with o2 Extenders
- 200 cell metallic substrate cats
- Gaskets and hardware included for a complete installation
- Free Shipping to the Lower 48!
- Made in the USA!!


American Racing Headers - 1 7/8" Complete System -2010-2015 Camaro SS - CA201078CS
American Racing Headers - 2" Complete System -2010-2015 Camaro SS - CA20102CS


American Racing Headers full system for the 2010-2015 Camaro SS features 304 stainless steel 1 7/8" or 2" primaries, 3" merge collectors, and 3" x-pipe with dual-tip mufflers, along with all the necessary hardware and gaskets for a bolt-on installation.

Note: California Restrictions - The Sale Of This Product Is Strictly Limited To Off Road Race/Competition Vehicles.

Product Features
- Tig welded 304 stainless steel
- 1-Piece mandrel-bent primary tubes
- Merge collector spike for better scavenging
- Welded o2 bungs with o2 extenders
- 200 cell metallic substrate cats
- Gaskets and hardware included for a complete installation
- Free Shipping to the Lower 48!
- Made in the USA!!




BBK - 1 3/4" x 3" Shorty Headers (Chrome) - 2010-2015 Camaro SS - 4020
BBK - 1 3/4" x 3" Shorty Headers (Ceramic coated) - 2010-2015 Camaro SS - 40200
BBK - 1 3/4" x 3" Shorty Headers (304 Stainless) - 2010-2015 Camaro SS - 40205


BBK tuned length shorty headers for the 2010-2015 Camaro SS feature CNC mandrel bent 1 3/4" primaries, 3/8" thick flanges, precision welds, and all the necessary hardware for a bolt-on installation.

This system has been Dyno proven to add 12-18 horsepower!

Product Features
- Chrome, Ceramic coated or 304 stainless finish
- Mandrel bent primary tubes
- Precision welds
- Gasket and hardware included for a complete installation
- Free shipping to the Lower 48!


BBK - 1 3/4" x 3" Long Tube Headers w/Cats (Chrome) - 2010-2015 Camaro SS - 4021
BBK - 1 3/4" x 3" Long Tube Headers w/Cats (Ceramic Coated) - 2010-2015 Camaro SS - 40210
BBK - 1 3/4" x 3" Long Tube Headers w/Cats (304 Stainless) - 2010-2015 Camaro SS - 40215



BBK - 1 3/4" x 3" Long Tube Headers w/out Cats (Chrome) - 2010-2015 Camaro SS - 4031
BBK - 1 3/4" x 3" Long Tube Headers w/out Cats (Ceramic Coated) - 2010-2015 Camaro SS - 40310
BBK - 1 3/4" x 3" Long Tube Headers w/out Cats - 2010-2015 Camaro SS - 40315

BBK long tube headers for the 2010-2015 Camaro SS features CNC mandrel-bent 1 3/4" primaries, 3" collectors, welded o2 bungs, o2 extenders, and non catted off road or catted connection pipes along with all the necessary hardware and gaskets for a bolt-on installation.

Product Features
- Chrome, Ceramic coated or 304 Stainless finish
- Mandrel bent primary tubes
- Precision welds
- Gasket and hardware included for a complete installation
- Free shipping to the Lower 48!




Doug Thorley Headers - 1 3/4" x 2 1/2" Shorty Headers - 2008-2015 Camaro SS/G8 GT - THY-336-C

Doug Thorley shorty headers for a 2010-2015 Camaro SS and 2008-2009 G8 GT features durable 14-gauge mild steel with 3/8 in. thick flanges, 5/16 in. collector rings, and are topped off with a good looking, industry leading ceramic coated finish. These headers have an O-ring welded into the flange, in addition to the high-temperature gasket provided.

Note: - Not legal for use in California on pollution controlled motor vehicles.

Product Features
- 14-gauge mild steel
- Welded o-ring into flange
- Ceramic coating finish
- Compact design – great for tight spaces
- Includes gaskets and hardware for a complete installation
- Made in the USA!
- Free Shipping to the Lower 48!


Doug Thorley Headers - 1 7/8" x 2 1/2" Tri-Y Long Tube Headers - 2010-2015 Camaro SS/ZL1 - THY-339Y-C

Doug Thorley long tube headers for the 2010-2015 Camaro SS and 2012-2015 Camaro ZL1 designed for supercharged application or heavy naturally aspirated models and features 4:2:1 collector specification that matches your engine's firing order and thereby maximize exhaust scavenging. These headers includes 1 7/8" primaries, 2 1/2" collectors, and are available in only ceramic coating to keep under hood temperatures down and increase performance.

Note: Not legal for use in California on pollution controlled motor vehicles.

Product Features
- 14-Gauge mild steel
- Ceramic coating finish
- Comes complete connector pipes
- Maximum torque and horsepower boost
- Made in the USA!
- Backed by a Limited Lifetime Warranty!
- Free Shipping to the Lower 48!


Dynatech

Dynatech - 1 7/8" x 3" Full Length SuperMaxx Headers - 2010-2015 Camaro SS & 2012-2015 ZL1 - 715-73910

Dynatech SuperMaxx Headers for the 2010-15 SS and 2012-15 ZL1 Camaro feature T-304 stainless steel CNC mandrel bent tubing, 1 7/8" primaries, CAD-designed Aero-flow 3" collectors, welder o2 bungs, and o2 extenders along with all the necessary hardware and gaskets for a bolt-on installation.

The Dynatech system is dyno proven to to increase horsepower and torque. The Dynatech SuperMaxx headers also require connection pipes which connect to your factory exhaust or any aftermarket system designed to bolt up to the stock converters or 3" connection pipes for 3" systems. JDP Motorsports suggest using the catted connection pipes as they cause very little restriction and they help to control emissions.

Product Features:
- 100% T-304 Stainless Steel
- 1-Piece Mandrel-Bent Primary Tubes
- Merge Collector Spike for better scavenging
- Welded o2 Bungs with o2 Extenders
- Ball 4 Bolt Flange Collector for great leak free performance
- Gaskets and Hardware included for a complete installation
- Free Shipping to the lower 48!

Flowmaster - 1 3/4" x 3" Shorty Headers - 2010-2015 Camaro SS - 814121

Flowmaster shorty headers for the 2010-2015 Camaro SS includes ceramic coated stainless steel 1 3/4" primaries, 3" merge collectors, along with all the necessary hardware and gaskets for a bolt-on installation. Catalytic converters are not included.

Note: this product has been granted a California Air Resources Board (CARB) exemption, an E.O. number, or is a direct or consolidated replacement part. It is 50-state legal, per the application guide.

Product Features
- Ceramic coated stainless steel
- Merge collector spike for better scavenging
- Gaskets and hardware included for a complete installation
- CARB EO # D-698
- Free Shipping to the Lower 48!

Flowmaster - 1 7/8" x 3" Long Tube Headers - 2010-2015 Camaro SS - 814117

Flowmaster long tube headers for the 2010-2014 Camaro SS includes ceramic coated stainless steel 1 7/8" primaries, 3" merge collectors, along with all the necessary hardware and gaskets for a bolt-on installation. Catalytic converters are not included. These headers are not CARB approved and are designed for off road use.

Product Features
Ceramic coated stainless steel
Gaskets and hardware included
Free Shipping to the Lower 48!





KOOKS - 1 7/8" x 3" Long Tube Headers w/Cats - 2010-2015 Camaro SS/ZL1 - 2250H420


2010-2015 Camaro SS 6.2L V8 L99 and LS3 - Kooks Headers - 1 7/8" Long Tube Headers with catted connection pipes

Featuring 304 Tig Welded Stainless Steel 1 7/8" Primaries, 3" merge collectors, Welded o2 bungs, o2 extenders along with high flow catalytic converters and all the necessary hardware and gaskets for a bolt-on installation.

The 2010-2015 Camaro SS KOOKS system was designed to bolt-on to your factory cat-back or a wide range of aftermarket systems that were designed to bolt up to the OEM converters. JDP Motorsports uses and installs KOOKS headers on 90% of our shop installations as the fit and finish on these headers is 2nd to none!


Product Features

- Tig Welded 304 Stainless
- 1-Piece Mandrel-Bent Primary Tubes
- Merge Collector Spike for better scavenging
- High flow Catalytic converters included
- "Green" cats available
- Welded o2 Bungs with o2 Extensions
- Ball Flange Collector for great leak free performance
- Gaskets and Hardware included for a complete installation
- Free Shipping!
- Price Match Guaranteed!!

Note: This part supersedes part # 6511-OEMC

Use JDP Coupon Code: K2250H420 for an additional discount!


KOOKS - 1 7/8" x 3" Long Tube Headers w/out Cats - 2010-2015 Camaro SS/ZL1 - 2250H410


2010-2015 Camaro SS 6.2L V8 L99 and LS3 - Kooks 1 7/8" Long Tube Headers with OFF-ROAD connection pipes

Featuring 304 Tig Welded Stainless Steel 1 7/8" Primaries, 3" merge collectors, Welded o2 bungs, o2 extenders along with high flow catalytic converters and all the necessary hardware and gaskets for a bolt-on installation.

The 2010-2015 Camaro SS KOOKS system was designed to bolt-on to your factory cat-back or a wide range of aftermarket systems that were designed to bolt up to the OEM converters. JDP Motorsports uses and installs KOOKS headers on 90% of our shop installations as the fit and finish on these headers is 2nd to none!


Product Features

- Tig Welded 304 Stainless
- 1-Piece Mandrel-Bent Primary Tubes
-Merge Collector Spike for better scavenging
- OFF-ROAD Connection pipes included
- Welded o2 Bungs with o2 Extensions
- Ball Flange Collector for great leak free performance
- Gaskets and Hardware included for a complete installation
- Free Shipping to the Lower 48!!
- Price Match Guaranteed!!

Note: This part # Supersedes part # 6511-OEMO

Use JDP Coupon Code: K2250H410 for an additional discount!




LG Motorsports - 1 7/8" x 3" Long Tube Headers - 2010-2015 Camaro SS - 2271

Featuring Stainless Steel 1 7/8" Primaries, 3" merge collectors, Welded o2 bungs, o2 extenders along with all the necessary hardware and GM gaskets for a bolt-on installation.

LG Motorsports learned a long time ago to make the system work, it needs to be easy for the user to install. So like their Corvette systems they made this as simple of a bolt on as you can get. All of their kits come complete from engine to mufflers or with mufflers and tips included so all you have to do is bolt it onto the car. Fittings slip together for the smoothest connection between pipes. This also makes their cats replaceable in the event of damage or you want to swap to an off-road setup for track use. The only cutting you would have to do, would be removing the stock mufflers if you want to use them with their kit as GM welded the OE system together complete from the manifolds back.

The LG Motorsports headers system is available with four different options including:
Full system with out cats, without mufflers
Full system w/cats and without mufflers
Full system w/o cats and w/mufflers
Full system w/cats and with mufflers
The LG designed mufflers are fully polished stainless steel. These also a full 3" throughout and end with a 4" double walled slash cut tip. Lightweight and combined with a straight through design give you little back pressure with a deep American V8 sound!

Product Features:
- 1 7/8" Primary size
- 3" merge collector with fire cone
- Full 3" mid section
- 3" high flow Siamese X pipe design
- Connects to OE or OE replacement mufflers with included 2.5" adapter
- All wires, hardware, extensions and GM gaskets now included
- High flow optional 200 cell metal matrix catalytic converters
- Off-road pipes included no charge on catted systems
- 35+ RWHP GAIN!
- Manufacturer Lifetime Warranty for original owner
- Free Shipping to the lower 48!




SLP - 1 3/4" x 3" Long Tube Headers w/Cats - 2010-2015 Camaro SS - 30211
SLP - 1 3/4" x 3" Long Tube Headers w/Cats - 2010-2014 Camaro SS - 30212

SLP long tube headers with cats for the 2010-2015 Camaro SS features a 4-into-1 long tube header system with equal length 1 3/4" primaries flowing into 3" collectors. The headers are mandrel bent 409 stainless steel and ceramic coated to keep heat in, exhaust velocity up, and under-hood temperatures down, while the rest of the system is made from high-quality stainless steel.

These headers will install onto your L99 or LS3 Coupe or Convertible Camaro without any modifications, not to mention ease of installation. Clearances around all wire harnesses, vacuum lines and AC lines meet or exceed factory clearances.

SLP's complete header package netted +23 RWHP and +21ft-lbs gains over the stock factory system without a tune.

Also, included in the package is a pair of 3" high flow catalyst converters to bolt to your factory H-Pipe assembly. (If upgrading to SLP PowerFlo-X™ Crossover Assembly at a later date, you must purchase SLP part #30211. Only an SLP axle-back exhaust will work with SLP's PowerFlo-X™ Crossover Assembly). This header package is fully compatible with all stock emissions-control equipment and use OEM flanges for perfect fit and proper bolt retention. All necessary installation instructions and hardware are included, backed by SLP's Lifetime Warranty.

Product Features
- 4-into-1 design w/3" collectors, featuring 1-3/4" equal-length primaries.
- All mandrel bent stainless steel construction to maximize flow.
- +23 RWHP and +21 ft-lbs gains over stock system.
- Polished aluminum-ceramic thermal-barrier coating (interior and exterior surfaces) to keep heat in, exhaust velocity up, and under-hood temperatures down.
- 200 Cell Per Inch 3" High-Flow Cats for unrestricted exhaust flow.
- Complete bolt-on installation, bolts directly to factory H-Pipe (no welding required).
- Can upgrade to SLP's PowerFlo-X™ Crossover part #30221.
- Covered by SLP's Performance Guarantee and Lifetime Warranty.
- Free Shipping to the Lower 48!




Factory Connection:[/B]

Stainless Works - 1 7/8" x 3" Long Tube Headers w/Cats Part # CA11HCATST
- 1 7/8" Primaries, 3" Merge Collectors
- Welded o2 bungs, o2 extenders
- High flow catalytic converters
- Includes all necessary hardware and gaskets for bolt-on installation
- Made in the USA!

Stainless Works - 2" x 3" Long Tube Headers w/Cats Part # CA11HCAT
- 2" Primaries, 3" Merge Collectors
- Welded o2 bungs, o2 extenders
- High flow catalytic converters
- Includes all the necessary hardware and gaskets for a bolt-on installation
- Made in the USA!




Stainless Works - 1 7/8" x 3" Long Tube Headers w/out Cats Part # CA11HORST
- 1 7/8" Primaries, 3" Merge Collectors
- Welded o2 bungs, o2 extenders
- Non-Catted
- Includes all necessary hardware and gaskets for bolt-on installation
- Made in the USA!

Stainless Works - 2" x 3" Long Tube Headers w/ out Cats Part # CA11HOR
- 2" Primaries, 3" Merge Collectors
- Welded o2 bungs, o2 extenders
- Non-Catted
- Includes all the necessary hardware and gaskets for a bolt-on installation
- Made in the USA!





Performance Connection:
*Can only be used with Stainless works Performance connection exhaust systems*


Stainless Works - 1 7/8" x 3" Long Tube Headers w/Cats for SW Exhaust Part # CA11H3CATST
- 1 7/8" Primaries, 3" Merge Collectors
- Welded o2 bungs, o2 extenders
- High flow metal matrix catalytic converters
- Includes all the necessary hardware and gaskets for a bolt-on installation
- Designed specifically for the Stainless Works exhaust system
- Made in the USA!

Stainless Works - 2" x 3" Long Tube Headers w/Cats for SW Exhaust Part # CA11H3CAT
- 2" Primaries, 3" Merge Collectors
- Welded o2 bungs, o2 extenders
- High flow metal matrix catalytic converters
- Includes all the necessary hardware and gaskets for a bolt-on installation
- designed specifically for the Stainless Works exhaust system
- Made in the USA!




Stainless Works - 1 7/8" x 3" Long Tube Headers w/out Cats for SW Exhaust Part # CA11H3ORST
- 1 7/8" Primaries, 3" Merge Collectors
- Welded o2 bungs, o2 extenders
- Non-Catted
- Includes all necessary hardware and gaskets for bolt-on installation
- Designed specifically for the Stainless Works exhaust system
- Made in the USA!

Stainless Works - 2" x 3" Long Tube Headers w/out Cats for SW Exhaust Part # CA11H3OR
- 2" Primaries, 3" Merge Collectors
- Welded o2 bungs, o2 extenders
- Non-Catted
- Includes all necessary hardware and gaskets for bolt-on installation
- Designed specifically for the Stainless Works exhaust system
- Made in the USA!




For those of you on a budget, we also have the Stainless Power headers available at an exceptionally affordable price! The Stainless Power headers are made with the same materials and specs, but they are assembled over-seas and come with a 2 year warranty compared to the lifetime warranty actual Stainless Works headers. The quality of these headers is good, they do fit well and make great power. Overall, these headers are an EXCELLENT bang for the buck!

Stainless Power Long Tube Headers 2010-2015 Camaro SS/ZL1


Please feel free to call, email, or PM us anytime with questions or for pricing. Happen to find a lower price? Just let us know and we'll match or BEAT it! We appreciate everyone's support and have a great day!

Best regards,

Tyler
888-308-6007
Click HERE to send me a personal message
sales@jdpmotorsports.com
__________________

Click HERE to send me a PM | Sales@jdpmotorsports.com | www.jdpmotorsports.com | Facebook | 888.308.6007

Last edited by JDP Tyler; 04-07-2015 at 12:48 PM.
JDP Tyler is online now   Reply With Quote
Old 01-31-2015, 01:00 PM   #2
Jc's1LE

 
Drives: 2015 SW 1LE BA NPP Recaros
Join Date: Jan 2013
Location: lake mary FL
Posts: 825
PM me BBK shorty CC and 304 thanks
Jc's1LE is offline   Reply With Quote
Old 02-10-2015, 03:50 PM   #3
JDP Tyler

 
JDP Tyler's Avatar
 
Drives: Chevys at the limit
Join Date: Nov 2010
Location: SLC, UT
Posts: 8,070
All, PMs and emails have been sent and replied to! Thanks for the orders and let us know if you have any questions!

Best regards,

Tyler
888-308-6007
__________________

Click HERE to send me a PM | Sales@jdpmotorsports.com | www.jdpmotorsports.com | Facebook | 888.308.6007
JDP Tyler is online now   Reply With Quote
Old 04-16-2015, 12:54 PM   #4
JDP Tyler

 
JDP Tyler's Avatar
 
Drives: Chevys at the limit
Join Date: Nov 2010
Location: SLC, UT
Posts: 8,070
Call PM or email me for special offers and discount codes! We have some killer deals going right now!!

Best regards,

Tyler
888-308-6007
__________________

Click HERE to send me a PM | Sales@jdpmotorsports.com | www.jdpmotorsports.com | Facebook | 888.308.6007
JDP Tyler is online now   Reply With Quote
Old 04-30-2015, 01:01 PM   #5
JDP Tyler

 
JDP Tyler's Avatar
 
Drives: Chevys at the limit
Join Date: Nov 2010
Location: SLC, UT
Posts: 8,070
Let it breath!

Best regards,

Tyler
888-308-6007
__________________

Click HERE to send me a PM | Sales@jdpmotorsports.com | www.jdpmotorsports.com | Facebook | 888.308.6007
JDP Tyler is online now   Reply With Quote
Old 05-13-2015, 11:55 AM   #6
JDP Tyler

 
JDP Tyler's Avatar
 
Drives: Chevys at the limit
Join Date: Nov 2010
Location: SLC, UT
Posts: 8,070
Just received a big stocking order of KOOKS headers! Let's get some heading your way!



Best regards,

Tyler
888-308-6007
__________________

Click HERE to send me a PM | Sales@jdpmotorsports.com | www.jdpmotorsports.com | Facebook | 888.308.6007
JDP Tyler is online now   Reply With Quote
 
Reply

Tags
5th gen camaro headers, best camaro headers, best price, camaro headers, jdp motorsports

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:29 PM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2015, vBulletin Solutions, Inc.