Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
PFYC
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Engine | Drivetrain | Powertrain Technical Discussions > Forced Induction - V8

Forced Induction - V8 V8 Supercharger, turbo, nitrous discussions

Reply
 
Thread Tools
Old 11-22-2012, 10:52 PM   #1
MARINE1991


 
MARINE1991's Avatar
 
Drives: COTW 8/29/11 2010 CAMARO
Join Date: Jul 2009
Location: hickville NC USA
Posts: 9,917
Cam recommendations with TVS 2300

Helloo.. Looking for recommendations on a cam that will work out with a TVS 2300, want reliability along with HP not too aggressive just something that will give good numbers as well give good dependability. I have a L99 and will be doing a LS3 conversion as well with the install..
MARINE1991 is offline   Reply With Quote
Old 11-22-2012, 10:56 PM   #2
2SS45th


 
2SS45th's Avatar
 
Drives: 11 Seconds or Faster
Join Date: May 2012
Location: Arvada, Colorado
Posts: 2,806
Lingenfelter GT9, is one that isn't too aggressive. Any of the stage 1 blower cams from Vengeance, ECS, ADM, etc. Jannety also has some nice blower cams, so don't count him out.
__________________
I Ain't About That Stock Life.

2SS45th is offline   Reply With Quote
Old 11-22-2012, 11:01 PM   #3
MARINE1991


 
MARINE1991's Avatar
 
Drives: COTW 8/29/11 2010 CAMARO
Join Date: Jul 2009
Location: hickville NC USA
Posts: 9,917
Quote:
Originally Posted by 2SS45th View Post
Lingenfelter GT9, is one that isn't too aggressive. Any of the stage 1 blower cams from Vengeance, ECS, ADM, etc. Jannety also has some nice blower cams, so don't count him out.
Thanks I will take a look at them.. did you install yours yet..
MARINE1991 is offline   Reply With Quote
Old 11-22-2012, 11:02 PM   #4
Jessika
Account Suspended
 
Drives: Anything Blown
Join Date: Aug 2010
Location: SoCal
Posts: 1,197
Quote:
Originally Posted by MARINE1991 View Post
Thanks I will take a look at them.. did you install yours yet..
Supercharger connection is a lingenfelter one stop shop!

sent from my Note2 using Tapatalk
Jessika is offline   Reply With Quote
Old 11-22-2012, 11:04 PM   #5
MARINE1991


 
MARINE1991's Avatar
 
Drives: COTW 8/29/11 2010 CAMARO
Join Date: Jul 2009
Location: hickville NC USA
Posts: 9,917
Quote:
Originally Posted by Jessika@SCC View Post
Supercharger connection is a lingenfelter one stop shop!

sent from my Note2 using Tapatalk
Jessika, only issue is I will picking it on the way to NC.... :(
MARINE1991 is offline   Reply With Quote
Old 11-22-2012, 11:05 PM   #6
2SS45th


 
2SS45th's Avatar
 
Drives: 11 Seconds or Faster
Join Date: May 2012
Location: Arvada, Colorado
Posts: 2,806
Nope, not yet. Still gathering parts, and also choosing a cam like yourself. I still need to rebuild the motor, but have to finish the rear end first. Jessika is great to work with as well. Do you want an aggressive idle or smooth?
__________________
I Ain't About That Stock Life.

2SS45th is offline   Reply With Quote
Old 11-22-2012, 11:05 PM   #7
Jessika
Account Suspended
 
Drives: Anything Blown
Join Date: Aug 2010
Location: SoCal
Posts: 1,197
Quote:
Originally Posted by MARINE1991 View Post
Jessika, only issue is I will picking it on the way to NC.... :(
I'll ship it to your new place and have it waiting with a bow on it

sent from my Note2 using Tapatalk
Jessika is offline   Reply With Quote
Old 11-22-2012, 11:08 PM   #8
MARINE1991


 
MARINE1991's Avatar
 
Drives: COTW 8/29/11 2010 CAMARO
Join Date: Jul 2009
Location: hickville NC USA
Posts: 9,917
Quote:
Originally Posted by 2SS45th View Post
Nope, not yet. Still gathering parts, and also choosing a cam like yourself. I still need to rebuild the motor, but have to finish the rear end first. Jessika is great to work with as well. Do you want an aggressive idle or smooth?
Smooth...

Quote:
Originally Posted by Jessika@SCC View Post
I'll ship it to your new place and have it waiting with a bow on it

sent from my Note2 using Tapatalk
SWEEEET.......
MARINE1991 is offline   Reply With Quote
Old 11-22-2012, 11:10 PM   #9
2SS45th


 
2SS45th's Avatar
 
Drives: 11 Seconds or Faster
Join Date: May 2012
Location: Arvada, Colorado
Posts: 2,806
Then the Lingenfelter GT9 would be a great option, and for the bang for the buck, the GM LS9 cam is a good one too. The LS9 cam is sub $100, only reason I wouldn't put one in my car is because I want a rough idle.
__________________
I Ain't About That Stock Life.

2SS45th is offline   Reply With Quote
Old 11-22-2012, 11:13 PM   #10
MARINE1991


 
MARINE1991's Avatar
 
Drives: COTW 8/29/11 2010 CAMARO
Join Date: Jul 2009
Location: hickville NC USA
Posts: 9,917
Quote:
Originally Posted by 2SS45th View Post
Then the Lingenfelter GT9 would be a great option, and for the bang for the buck, the GM LS9 cam is a good one too. The LS9 cam is sub $100, only reason I wouldn't put one in my car is because I want a rough idle.
I will look into it thanks, alot of people like the comp cams as well... but have no idea..
MARINE1991 is offline   Reply With Quote
Old 11-22-2012, 11:17 PM   #11
2SS45th


 
2SS45th's Avatar
 
Drives: 11 Seconds or Faster
Join Date: May 2012
Location: Arvada, Colorado
Posts: 2,806
I know what you mean, there are a lot of options to choose from. I am either jumping for the ADM stage 2, or the TSP blower cam. I just want as much hp as possible
__________________
I Ain't About That Stock Life.

2SS45th is offline   Reply With Quote
Old 11-22-2012, 11:22 PM   #12
MARINE1991


 
MARINE1991's Avatar
 
Drives: COTW 8/29/11 2010 CAMARO
Join Date: Jul 2009
Location: hickville NC USA
Posts: 9,917
Quote:
Originally Posted by 2SS45th View Post
I know what you mean, there are a lot of options to choose from. I am either jumping for the ADM stage 2, or the TSP blower cam. I just want as much hp as possible
Think I am going to power coat the SC VR also....
MARINE1991 is offline   Reply With Quote
Old 11-22-2012, 11:25 PM   #13
2SS45th


 
2SS45th's Avatar
 
Drives: 11 Seconds or Faster
Join Date: May 2012
Location: Arvada, Colorado
Posts: 2,806
That's going to look awesome, is yours the waffle top, or the slp version?
__________________
I Ain't About That Stock Life.

2SS45th is offline   Reply With Quote
Old 11-22-2012, 11:29 PM   #14
MARINE1991


 
MARINE1991's Avatar
 
Drives: COTW 8/29/11 2010 CAMARO
Join Date: Jul 2009
Location: hickville NC USA
Posts: 9,917
Quote:
Originally Posted by 2SS45th View Post
That's going to look awesome, is yours the waffle top, or the slp version?
Have not seen it yet.... think its the waffle one...
MARINE1991 is offline   Reply With Quote
Old 11-22-2012, 11:32 PM   #15
2SS45th


 
2SS45th's Avatar
 
Drives: 11 Seconds or Faster
Join Date: May 2012
Location: Arvada, Colorado
Posts: 2,806
either way it'll look good!
__________________
I Ain't About That Stock Life.

2SS45th is offline   Reply With Quote
Old 11-22-2012, 11:33 PM   #16
MARINE1991


 
MARINE1991's Avatar
 
Drives: COTW 8/29/11 2010 CAMARO
Join Date: Jul 2009
Location: hickville NC USA
Posts: 9,917
Quote:
Originally Posted by 2SS45th View Post
either way it'll look good!
MARINE1991 is offline   Reply With Quote
Old 11-22-2012, 11:38 PM   #17
ayousef

 
ayousef's Avatar
 
Drives: 2013 ZL1
Join Date: Oct 2012
Location: Dubai
Posts: 759
the GT9 cam will kill a bunch of low-end torque and make it up in the high end, just so you know we spin a TVS2300 camaro 6900 because it makes peak power there with the GT9, this is with low boost from the blower. If you're making high boost youll peak at a lower rpm and make up for the low rpm torque loss. Plus it doesnt surge or buck.

I was also told to install the GT9 and advance it 4 degrees for a better overall power curve by a dude who specs cams for a living, might want to try that.
__________________

1150bhp Whipple 4.0 Supercharged 427ci Camaro ZL1

Last edited by ayousef; 11-23-2012 at 02:21 AM.
ayousef is offline   Reply With Quote
Old 11-23-2012, 12:16 AM   #18
MARINE1991


 
MARINE1991's Avatar
 
Drives: COTW 8/29/11 2010 CAMARO
Join Date: Jul 2009
Location: hickville NC USA
Posts: 9,917
Quote:
Originally Posted by 2SS45th View Post
either way it'll look good!
Quote:
Originally Posted by 2SS45th View Post
That's going to look awesome, is yours the waffle top, or the slp version?
its waffle... can make waffles too...
MARINE1991 is offline   Reply With Quote
Old 11-23-2012, 01:23 AM   #19
Jessika
Account Suspended
 
Drives: Anything Blown
Join Date: Aug 2010
Location: SoCal
Posts: 1,197
Quote:
Originally Posted by MARINE1991 View Post
its waffle... can make waffles too...


sent from my Note2 using Tapatalk
Jessika is offline   Reply With Quote
Old 11-23-2012, 04:53 AM   #20
maxdmax

 
maxdmax's Avatar
 
Drives: 2010 Camaro SS/RS
Join Date: Nov 2008
Location: East KY
Posts: 756
I had a G5XB and it is a great blower CAM no overlap and not too aggressive. Makes great power.
__________________
LPE 417 - TVS2300 787 RWHP 759 Torque - Built by WWW.KYSPEED.COM
maxdmax is offline   Reply With Quote
Old 11-23-2012, 05:47 AM   #21
2010SSRSM6
SoCal C5 Family Member
 
2010SSRSM6's Avatar
 
Drives: My wife crazy with my C5 usage.
Join Date: Apr 2009
Location: SoCal
Posts: 5,832
I'm running a CMS custom grind on a Comp Cam. Before the blower I picked up about 60 HP, with the Maggie and OD cogs with the 3.8 pulley it picked up just a hair over 200rwhp @ 9.5 pounds of boost. I think it was in the $350 range for just the cam.


Sent from my iPhone using Tapatalk
__________________
Powered by Cunningham MotorSports
2010SSRSM6 is offline   Reply With Quote
Old 11-23-2012, 10:22 AM   #22
MARINE1991


 
MARINE1991's Avatar
 
Drives: COTW 8/29/11 2010 CAMARO
Join Date: Jul 2009
Location: hickville NC USA
Posts: 9,917
Quote:
Originally Posted by Jessika@SCC View Post


sent from my Note2 using Tapatalk
MARINE1991 is offline   Reply With Quote
Old 11-23-2012, 10:34 AM   #23
catalan
 
Drives: -
Join Date: Nov 2010
Location: Bahrain
Posts: 164
I'm looking for the same thing which fits the TVS 2300 but i need a good decent powerful cam which is stealth in idle just like the stock (i just don't want the noise).. I also have L99 but not planning for the LS3 conversion ..

Which one do you recommend guys ?
catalan is offline   Reply With Quote
Old 11-23-2012, 11:25 AM   #24
2SS45th


 
2SS45th's Avatar
 
Drives: 11 Seconds or Faster
Join Date: May 2012
Location: Arvada, Colorado
Posts: 2,806
Quote:
Originally Posted by catalan View Post
I'm looking for the same thing which fits the TVS 2300 but i need a good decent powerful cam which is stealth in idle just like the stock (i just don't want the noise).. I also have L99 but not planning for the LS3 conversion ..

Which one do you recommend guys ?
You'd have to get a VVT cam then. TSP has ome of those, but if it were me, I would be doing the conversion. Your options would be far greater if you do that. I would also recommend the GT9, LS9, or Jannety Smooth Idle cam in that case.

These are your options for keeping the AFM lifters in place: http://texas-speed.com/c-234-camshaf...c-engines.aspx
__________________
I Ain't About That Stock Life.

2SS45th is offline   Reply With Quote
Old 11-23-2012, 04:58 PM   #25
Hendrix-Engineering
Account Suspended
 
Drives: First 9 inch-12 bolt IRS Camaro
Join Date: Jun 2009
Location: nc
Posts: 1,839
I would find some one who can spec a cam to YOUR specs,your needs and wants .No reason for a cam sitting on the shelf,why comprimise? I would find someone who not only has several 2300 builds over 800rwhp but has a vast knowledge of the PD blowers and knows how to get you where you want to be.I would look for proven results and tons of happy customers from mild to wild.Our number is 980-521-0722 we can get you the right cam the first time
Hendrix-Engineering is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:48 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.