You are browsing camaro5 
 |
|
12-27-2012, 06:16 PM
|
#1 |
  
|
DRL wiring kit/harness
I'm wanting to run my DRL's on at the same time as when my headlights go on. I found this item http://www.phastekperformance.com/20...light-drl1.htm but it seems like i can go to a radio shack, buy all those pieces, and do it for a lot less?
a T-splitter on each end, power wire, and the ability to find the right wires? Confirm? |
|
|
|
12-27-2012, 06:24 PM
|
#2 |
Drives: 2010 CGM Camaro 2SS/RS 429 LSX/F1X Join Date: Aug 2011
Location: Sandy, UT
Posts: 429
|
You could do that, yes. The thing I don't like about that type, is it back feeds electricity to the parking lights during the day. You'd need to have diodes installed to stop this from happening. Which is why we released our DRL harness to do that exact thing without cutting, splicing, or soldering needed.
http://www.camaro5.com/forums/showthread.php?t=263207 Feel free to call, email, or PM us anytime! - Jeremy 
|
|
|
|
|
12-27-2012, 07:14 PM
|
#3 | |
    
Drives: 2011 RJT Camaro LT2 RS auto shift Join Date: Dec 2011
Location: Washington state
Posts: 1,861
|
Quote:
__________________
 Caddy |
|
|
|
|
|
12-27-2012, 08:23 PM
|
#4 |
Drives: 2016 2SS coupe 2015 3LT Stingray Join Date: Aug 2012
Location: El paso texas
Posts: 880
|
I soldered a bypass like phastec without the connectors its all 12v so I dont think feedback will cause any harm, at worse you will power the parking lights
__________________
Ported intake manifold and throttle body kooks 2" headers no cats
|
|
|
|
|
|
|
|
 |
|
|
