Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
BeckyD@RodgersChevrolet
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Marketplace > Sponsors Classifieds Marketplace > Transmission / Driveline

Transmission / Driveline Shifters, differentials, gears, rearends, clutch

View our official forum sponsors list.

Reply
 
Thread Tools
Old 02-15-2013, 05:01 PM   #1
JDP Tyler

 
JDP Tyler's Avatar
 
Drives: 2010 Camaro SS/RS
Join Date: Nov 2010
Location: SLC, UT
Posts: 5,693
GM 1LE 3.91 Gear Sets! | In Stock | BEST prices | FREE shipping | JDP Motorsports

JDP Motorsports is proud to offer the Genuine GM Camaro 1LE 3.91 Gear Sets for your 2010-2014 Camaro SS!

Features a GM OEM ring & pinion gear set for the 2010-2014 Camaro SS/1LE that were designed for long life and quiet operation. The manufacturing process used combined with a professional installation will insure quiet factory like operation of your differential unlike less expensive gears sets that often can cause gear whine even if they are installed correctly. The 3.91 ratio ring and pinion provides a 13% increase in effective rear wheel torque multiplication compared to the factory 3.45 ring & pinion (MT) and a 20% increase in effective rear wheel torque multiplication compared to the factory 3.23 ring & pinion that is found on the A6 equipped Camaro SS.

When cruising at 60 mph in 6th gear, a manual transmission vehicle will see an approximate increase in engine speed of 180 RPM or 13% increase while automatic transmission vehicles will see an approximate increase of 300 rpm or 20% increase. Automatic & manual transmission equipped vehicles will require ECM calibration changes to correct the speedometer.

Components of the kit include ring and pinion, hardware and an optional installation kit for 2010-2013 Camaro SS models.

Genuine GM - 2010-2014 Camaro SS/Camaro 1LE 3.91 Gear Set - Part # 22813040

Product Features

- Genuine GM Part
- Direct Replacement for A6 and M6 Camaro SS Models
- SAE 4320 Steel Alloy Gear Material
- Optional Ring and Pinion Installation Kit
- FREE SHIPPING to the lower 48!

MSRP: $549.95
Sale $299.95

Optional Lingenfelter Ring and Pinion Installation Kit - Part # L380041410
Includes the required bearings & shims to install the GM 1LE 3.91 ring and pinion gear set as well as most aftermarket ring & pinion sets. Consists of 54 different parts including different shim sizes and bearings.

Ring and Pinion Installation Kit Includes

- Ring Gear Bolts (14)
- Pinion Bearing Spacer (1)
- Pinion Nut (1)
- Pinion Seal (1)
- Roller Bearing Assembly (1)
- Tapered cone bearing (1)
- 18 different sizes of pinion shims (1 of each)
- 31 different sizes of differential bearing shim (2 of each)
- Compatible with new or used differentials
- FREE SHIPPING to the lower 48!
- Made in the USA!

MSRP: $209.95
Sale $199.95

We appreciate your interest in our products. Please feel free to call, PM or email us anytime with questions!

Best regards,

Tyler
888-308-6007
__________________

Last edited by JDP Tyler; 02-21-2014 at 02:41 PM.
JDP Tyler is offline   Reply With Quote
Old 02-19-2013, 10:42 PM   #2
Rod Knock
 
Rod Knock's Avatar
 
Drives: 2011 IOM Camaro SS convertible
Join Date: Nov 2012
Location: San Antonio, TX
Posts: 345
any way to recalibrate the speedo without voiding warranty?
Rod Knock is offline   Reply With Quote
Old 02-26-2013, 02:42 PM   #3
Nitroman28

 
Nitroman28's Avatar
 
Drives: 2010 Camaro SS A6
Join Date: Oct 2010
Location: Arkansas
Posts: 1,374
Is this install kit everything I need other then the gasket?
Nitroman28 is offline   Reply With Quote
Old 02-26-2013, 04:40 PM   #4
JDP Tyler

 
JDP Tyler's Avatar
 
Drives: 2010 Camaro SS/RS
Join Date: Nov 2010
Location: SLC, UT
Posts: 5,693
Quote:
Originally Posted by Rod Knock View Post
any way to recalibrate the speedo without voiding warranty?
PM sent
Quote:
Originally Posted by Nitroman28 View Post
Is this install kit everything I need other then the gasket?
Yes that is correct! You should be able to reuse your stock gasket as well.

Feel free to call, PM or email me anytime with questions.

Best regards,

Tyler
888-308-6007
__________________
JDP Tyler is offline   Reply With Quote
Old 02-27-2013, 08:57 PM   #5
papawattz
 
papawattz's Avatar
 
Drives: 2010 Camaro 2SS/RS +99 contour SVT
Join Date: Mar 2011
Location: Michigan
Posts: 319
Do you need the Ring and Pinion Installation Kit, or can you just install the gear set and be OK?
papawattz is offline   Reply With Quote
Old 02-28-2013, 10:21 AM   #6
JDP Motorsports
GM Specialist

 
JDP Motorsports's Avatar
 
Drives: 2011 JDP Track Spec Camaro
Join Date: Jun 2009
Location: Sandy, Utah
Posts: 3,203
Quote:
Originally Posted by papawattz View Post
Do you need the Ring and Pinion Installation Kit, or can you just install the gear set and be OK?
You'll need the installation kit in order to get the gears set up correctly. It also includes new bearings which I suggest replacing while you're doing the installation. Please feel free to call, email or PM me anytime with questions. We appreciate your interest in our products and have a great day!

Kind regards,

Jordan Priestley
888.308.6007
__________________
JDP Motorsports is offline   Reply With Quote
Old 02-28-2013, 12:29 PM   #7
xtreme industries
 
Drives: 2010 Camaro 2lt RS
Join Date: Sep 2009
Location: Calgary, AB, Canada
Posts: 522
do you have an install kit for a V6?
__________________
2010 Camaro 2lt RS, IOM on IOM, M6, eibach springs, eibach sways, ported throttle body, black ice-olator, RX catch can, OBX headers - no cats, Pypes cat back, Vibrant resonators, injen intake, DRL over ride, decepticon fender emblems, transformer sill plates, transformer script on cowl, more to come.
xtreme industries is offline   Reply With Quote
Old 02-28-2013, 12:58 PM   #8
blazzin1


 
blazzin1's Avatar
 
Drives: 2010 2SS/RS R6P
Join Date: Nov 2008
Location: Seffner, FL
Posts: 4,254
Quote:
Originally Posted by JDP Motorsports View Post
You'll need the installation kit in order to get the gears set up correctly. It also includes new bearings which I suggest replacing while you're doing the installation. Please feel free to call, email or PM me anytime with questions. We appreciate your interest in our products and have a great day!

Kind regards,

Jordan Priestley
888.308.6007
I recently had my 3.45's replaced with these 3.91 gears, and I used the Lingenfelter Kit as well. One thing I did not understand is the theory of replacing a ball bearing (such as the two pinion bearings included in the kit), without replacing the associated races. My installer didn't understand that either, and sourced the races direct from GM, and replaced them too. I know many people say that in most cases the bearings are fine and don't need to be replaced anyway. But if you're going to do it, I thought it was standard practice to ALWAYS replace the race along with the bearing. Any thoughts on this Jordan???
blazzin1 is offline   Reply With Quote
Old 03-01-2013, 01:05 PM   #9
Orange2010SS
 
Drives: Orange 2010 2SS LS3
Join Date: Apr 2011
Location: Cary, NC
Posts: 148
Just placed my order online. Looking forward to receiving these and having them installed!! Thx
__________________
Orange2010SS is offline   Reply With Quote
Old 03-07-2013, 02:32 PM   #10
xtreme industries
 
Drives: 2010 Camaro 2lt RS
Join Date: Sep 2009
Location: Calgary, AB, Canada
Posts: 522
once again - do you have or will this install kit work on the V6 diff?
__________________
2010 Camaro 2lt RS, IOM on IOM, M6, eibach springs, eibach sways, ported throttle body, black ice-olator, RX catch can, OBX headers - no cats, Pypes cat back, Vibrant resonators, injen intake, DRL over ride, decepticon fender emblems, transformer sill plates, transformer script on cowl, more to come.
xtreme industries is offline   Reply With Quote
Old 03-07-2013, 04:26 PM   #11
JDP Motorsports
GM Specialist

 
JDP Motorsports's Avatar
 
Drives: 2011 JDP Track Spec Camaro
Join Date: Jun 2009
Location: Sandy, Utah
Posts: 3,203
Quote:
Originally Posted by xtreme industries View Post
do you have an install kit for a V6?
Quote:
Originally Posted by xtreme industries View Post
once again - do you have or will this install kit work on the V6 diff?
We haven't had a V6 Manual Camaro come in for a set of gears but I know the gears are the same (Manual only) so I'd imagine everything else would be as well.

Quote:
Originally Posted by Orange2010SS View Post
Just placed my order online. Looking forward to receiving these and having them installed!! Thx
Thank you for your business and support! Please feel free to call, email or PM me anytime with questions. Have a great day and we'll talk to you soon!

Quote:
Originally Posted by blazzin1 View Post
I recently had my 3.45's replaced with these 3.91 gears, and I used the Lingenfelter Kit as well. One thing I did not understand is the theory of replacing a ball bearing (such as the two pinion bearings included in the kit), without replacing the associated races. My installer didn't understand that either, and sourced the races direct from GM, and replaced them too. I know many people say that in most cases the bearings are fine and don't need to be replaced anyway. But if you're going to do it, I thought it was standard practice to ALWAYS replace the race along with the bearing. Any thoughts on this Jordan???
I suggest using new races when replacing the bearings. This is something we will end up adding to the Lingenfelter kit in the very near future to make it easier on shops and customers to get the gears installed. We're also offering assembled diffs on a core exchange program with various options.

Please feel free to call, email or PM me anytime with questions. I appreciate everyone's support and have a great day!

Kind regards,

Jordan Priestley
888.308.6007
__________________
JDP Motorsports is offline   Reply With Quote
Old 03-07-2013, 04:51 PM   #12
67motorcat
Blown Cool Breeze
 
67motorcat's Avatar
 
Drives: 2011 Black on Black 2SS M6
Join Date: Jul 2010
Location: Pinehurst NC
Posts: 1,025
My 2 cents

See post # 11 and #23 on this thread.I was there in person as well.

This same guy will be putting mine in this coming Tuesday as well
A lot of questions should be answered,My take is the GM gears will go in without the need for a "Install Kit"....remember this is not a Aftermarket part.

Most Camaro's that still have low mileage will have no need to change out the bearings,so everything stays as it needs to be.

Not saying the install kit is a bad thing,but lots of guys are doing it with out and everything is as it should be.I couldn't comment if all the bearings and everything are changed...that's when it gets more complicated.

Hope this helps....the swap is remarkably easy


http://www.camaro5.com/forums/showthread.php?t=265123
__________________
2011 Black on Black 2SS M6
Had a 2010 IBM 2SS M6
Enjoy life.Think of all the women on the Titanic who passed up dessert.
67motorcat is offline   Reply With Quote
Old 03-22-2013, 05:59 PM   #13
LS2SLOW
 
LS2SLOW's Avatar
 
Drives: 5th Gen
Join Date: Feb 2010
Location: Chesterfield
Posts: 209
ordered a set...looking foward to summer
LS2SLOW is offline   Reply With Quote
Old 03-28-2013, 11:46 AM   #14
2010_5thgen


 
2010_5thgen's Avatar
 
Drives: 2013 Acadia Denali
Join Date: Nov 2007
Location: Ohio
Posts: 3,272
still have the deal on the gears?

so the 3.91 is the 1le gear and the m6 ss is a 3.45? and nothing involved other than a regular gear swap and retune? seems pretty easy.
__________________

2012 Porsche Panamera 4
2010_5thgen is offline   Reply With Quote
Old 03-28-2013, 12:15 PM   #15
JDP Tyler

 
JDP Tyler's Avatar
 
Drives: 2010 Camaro SS/RS
Join Date: Nov 2010
Location: SLC, UT
Posts: 5,693
Quote:
Originally Posted by LS2SLOW View Post
ordered a set...looking foward to summer
Quote:
Originally Posted by 2010_5thgen View Post
still have the deal on the gears?
Thanks for the order!
so the 3.91 is the 1le gear and the m6 ss is a 3.45? and nothing involved other than a regular gear swap and retune? seems pretty easy.
Yep the sale continues, however these gears are currently on a national back order. We do have many sets on order, so once they become available again we will have a good stock.

Yes the M6 is 3.45 stock and yes it is pretty much a standard gear swap. Please feel free to call, PM or email me with questions.

Best regards,

Tyler
888-308-6007
__________________
JDP Tyler is offline   Reply With Quote
Old 03-28-2013, 12:53 PM   #16
2010_5thgen


 
2010_5thgen's Avatar
 
Drives: 2013 Acadia Denali
Join Date: Nov 2007
Location: Ohio
Posts: 3,272
cool. ill let you know about placing an order as soon as I can get around to it.
__________________

2012 Porsche Panamera 4
2010_5thgen is offline   Reply With Quote
Old 03-30-2013, 10:30 AM   #17
Turbo99

 
Turbo99's Avatar
 
Drives: 08' F250 Diesel & 10' Camaro 2SS
Join Date: Nov 2010
Location: Gainesville,Fl
Posts: 1,302
Any word on the status of getting the gears? I ordered a couple weeks ago and you thought 2-3 weeks or sooner was a good estimate.
__________________
Contact me for questions: coopwfo@gmail.com I cant send/receive PMs.
08' F250 CCSB 6.4L Diesel White & Black, Blacked out, 580RWHP @ 55psi 13.21 @ 101mph
10' Camaro 2SS LS3 M6 White & Black, Blacked out, 684 RWHP & 633 FT.LBS @ 10psi 10.82@130mph
TVS2300 ,Hendrix Street Slayer Twin Carbon Clutch, Dana 60 3.73, DSS 1400HP Axles,JRe cam & LaMotta Performance tuned,LPE Fuel, AI Super Chiller,MT ET Streets
Turbo99 is offline   Reply With Quote
Old 04-06-2013, 05:30 PM   #18
LS2SLOW
 
LS2SLOW's Avatar
 
Drives: 5th Gen
Join Date: Feb 2010
Location: Chesterfield
Posts: 209
Quote:
Originally Posted by Turbo99 View Post
Any word on the status of getting the gears? I ordered a couple weeks ago and you thought 2-3 weeks or sooner was a good estimate.
LS2SLOW is offline   Reply With Quote
Old 04-07-2013, 12:44 AM   #19
Rico
Flying da helicopter
 
Rico's Avatar
 
Drives: Black SS
Join Date: Oct 2009
Location: TX
Posts: 291
Hmm, I might have to order a set of these
Rico is offline   Reply With Quote
Old 04-07-2013, 01:20 AM   #20
BRAVO 2SS
Aim Small...Miss Small
 
BRAVO 2SS's Avatar
 
Drives: Black 2010 2SS/RS M6
Join Date: Jun 2012
Location: San Jose, CA
Posts: 518
Tyler...as soon as I get my Kooks order and get them installed...I will be ordering this from you too! Great customer service...I will be a customer for a long time!!!
__________________
2010 Camaro 2SS/RS
BRAVO 2SS is offline   Reply With Quote
Old 04-08-2013, 10:59 AM   #21
JDP Tyler

 
JDP Tyler's Avatar
 
Drives: 2010 Camaro SS/RS
Join Date: Nov 2010
Location: SLC, UT
Posts: 5,693
Quote:
Originally Posted by Turbo99 View Post
Any word on the status of getting the gears? I ordered a couple weeks ago and you thought 2-3 weeks or sooner was a good estimate.
We still do not have 100% positive confirmation, but I will update when we do. We are hoping near the end of this week/early next. The Ball is in GM's court at the moment.

Quote:
Originally Posted by BRAVO 2SS View Post
Tyler...as soon as I get my Kooks order and get them installed...I will be ordering this from you too! Great customer service...I will be a customer for a long time!!!
Thanks for the kind words! I appreciate your support! Please feel free to call, PM or email me anytime with questions.

Best regards,

Tyler
888-308-6007
__________________
JDP Tyler is offline   Reply With Quote
Old 04-21-2013, 10:07 AM   #22
Jim Burke
 
Jim Burke's Avatar
 
Drives: 45th 2SS Coupe
Join Date: Jul 2012
Location: Edmonton
Posts: 132
Hey Tyler,

Can you PM me a price for the gears and install kit. Shipped to T8L0C2 (Canada)

Thanks,
Jim Burke is offline   Reply With Quote
Old 04-23-2013, 11:43 PM   #23
BRAVO 2SS
Aim Small...Miss Small
 
BRAVO 2SS's Avatar
 
Drives: Black 2010 2SS/RS M6
Join Date: Jun 2012
Location: San Jose, CA
Posts: 518
Hey Tyler...are these in stock? Ready to ship?
__________________
2010 Camaro 2SS/RS
BRAVO 2SS is offline   Reply With Quote
Old 05-06-2013, 02:51 PM   #24
bada450r
 
Drives: 2011 2ss blk on blk convertible
Join Date: Aug 2012
Location: so-cal
Posts: 138
Quote:
Originally Posted by BRAVO 2SS View Post
Hey Tyler...are these in stock? Ready to ship?
There in national back order. ..can I get an update of when they'll be available. .ready to buy
__________________
2011 2ss black on black, v3 blown hauling ass and burning gas.
bada450r is offline   Reply With Quote
Old 05-06-2013, 03:22 PM   #25
Thebabycheech2012
 
Thebabycheech2012's Avatar
 
Drives: 2010 ss2 l99
Join Date: Nov 2012
Location: spring lake
Posts: 344
Pm does it work with l99
Thebabycheech2012 is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:36 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.