Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Cold Air Inductions
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Marketplace > Sponsors Classifieds Marketplace > V8 Bolt-Ons & Tunes

View our official forum sponsors list.


Reply
 
Thread Tools
Old 09-27-2014, 02:23 PM   #1
JDP Sales

 
JDP Sales's Avatar
 
Drives: Chevys at the limit
Join Date: Nov 2010
Location: SLC, UT
Posts: 10,603
Talking Elite Engineering PCV Catch Can SALE! | Keep your Engine CLEAN! | JDP Motorsports

Hey Everyone!

JDP Motorsports is a huge supporter of utilizing a PCV Oil Catch Can on any late-model performance vehicle. We're offering the Elite Engineering PCV Oil Catch Cans as we feel they are the highest quality piece offered on the market. We install these on 99% of the cars we work on here at JDP, they work that well!!



Purpose of your Stock PCV System

The PCV (Positive Crankcase Ventilation) system is designed to regulate and remove fumes from the engine crankcase, and to alleviate crankcase pressure which could cause oil leaks or seal damage. The PCV system routes crankcase fumes into the intake manifold where they can burned to eliminate harmful emissions into the atmosphere. The PCV valve controls the amount of crankcase flow volume depending on the engine's load. With large throttle openings (high engine loads), the more blow-by gases are produced, and the more the PCV system flows oil vapor in to the intake manifold. The PCV valve also functions as a check valve to prevent intake manifold flow from reversing back into the crankcase when there is a backfire, or during periods of high manifold pressure (boost) during forced induction by turbocharger or supercharger.

Negative Effects of your Stock PCV System

Many Camaro owners with LSX engines can testify to the amount of oil residue that can accumulate inside the intake manifold, throttle body, intake track and even the air filter during aggressive driving conditions. There are various negative effects when excess oil vapor contaminates the intake system from the stock PCV system - such as -

- Throttle body and/or MAFS (Mass Air Flow Sensor) malfunction or failure
- Air filter, intercooler (if equipped) and intake ducting contamination if oil pools and run back out the intake system after engine shutdown
- Reduced octane of the air/fuel mixture, which can cause detonation and the - ECM (Engine Control Module) to retard timing, thereby reducing engine power
- Excessive carbon build-up on valves, piston crowns, combustion chambers and spark plugs. This also increases the chance of detonation and power loss
- Increased emissions & possible contamination of catalytic converters and oxygen sensors

Ultimate Function

The Elite Engineering PCV Oil Catch Can is designed to effectively separate oil from the crankcase vapors, thereby eliminating all negative effects of excessive intake system oil contamination. The Elite Engineering Catch Can has been engineered to remove the oil vapor before it has a chance to contaminate your intake system.

Premium Construction

The Elite Engineering PCV Oil Catch Can is constructed of the finest materials inside and out. High performance car owners insist on the best products that offer unsurpassed function as well as impressive visual enhancement. The Elite Engineering Catch Can does both! Their exclusive design incorporates optimum function and the finest materials, construction and finish for maximum dependability.

The 2.6" diameter by 6.0" long body is machined from billet 6061-T6 aluminum alloy, and then anodized in a variety of colors for a striking look. The internal condensing screen is stainless steel encased inside an aluminum alloy housing designed for low flow restriction. The housing can be disassembled for screen inspection, cleaning or replacement if needed. The inlet and outlet hose fittings are brass, and threaded into the body and sealed with Teflon tape. Supplied hoses are fuel and oil vapor compatible (SAE 30R7 rated). The bottom catch can reservoir screws onto the top of the unit, and is sealed with a built in O-ring. Inspection and cleaning is easy by simply removing the bottom of the unit without disturbing the mounting system or hoses. In keeping with their high quality standards, all supplied mounting hardware and screws are stainless steel. The supplied custom machined bracket is aluminum, and is attached to the belt/tensioner pulley.






Product Features
- Anodized in choice of available colors, complete with 3/8" barbed inlet/outlet hose fittings
- Custom machined mounting
- Stainless steel mounting hardware
- 2 FT (LS3) | 5 FT (L99) of 3/8" ID fuel and oil vapor compatible hose
- Black zinc plated hose clamps
- Upgraded lines and fittings available
- Free Shipping to the Lower 48!
- Made in the USA!


MSRP: $175.00
Sale $150.00




Elite Engineering 2nd gen catch can features the same 3-chamber design that made the Elite catch can so popular and functional, but has a larger volume. Specifically designed for forced induction, turbo or supercharged engines.



Product Features
- Catch can assembly beautifully anodized in BLACK, complete with 3/8" barbed inlet/outlet hose fittings
- Custom machined mounting bracket to fit your specific vehicle and application
- All stainless steel mounting hardware
-3/8" ID fuel and oil vapor compatible hose
- PCV adapter hardware
- Black zinc plated hose clamps
- Upgraded lines available
- Free Shipping to the Lower 48!
- Made in the USA!

Added Benefits
- Elite's 3-chamber design WITH larger 3rd stage
- Available with: 1 or 2 exit ports
- Available with integrated EXIT check valves **
- 30% more volume than Elite's standard catch can
- Can be fully disassembled for easy cleaning or inspection
- Available in BLACK anodize color only
- Elite's check valves are integrated internally to their EXIT hose barb fittings; you can choose to have 1 or 2 EXIT check valves or standard free-flowing hose barb fittings

MSRP: $185.00
Sale $179.95


WE INSTALL PARTS!!
If you are looking to have work performed or have one of our packages installed on your vehicle, we have a facility in Sandy, Utah where we perform everything from bolt-on installations, Dyno testing/tuning and complete race car builds. Our install shop fills up fast, so please call us to set up an appointment.

Best regards,

Kayla L.
801.545.4215
__________________

Click HERE to send me a PM | Sales@jdpmotorsports.com | www.jdpmotorsports.com | 801-545-4215

Last edited by JDP Sales; 12-09-2016 at 01:16 PM.
JDP Sales is offline   Reply With Quote
Old 11-06-2014, 05:41 PM   #2
JDP Sales

 
JDP Sales's Avatar
 
Drives: Chevys at the limit
Join Date: Nov 2010
Location: SLC, UT
Posts: 10,603
Thanks for the orders camaro5! One of the best decisions you will make in an effort to keeping your engine clean and running efficiently is to install an Elite Engineering catch can. We install them on ALL of our builds and have even added them to our NEW JDP STAGE PACKAGES!!

Please feel free to call, PM or email us anytime with questions and we will be happy to assist you with choosing the right setup for your application!

Best regards,

Tyler
888-308-6007
__________________

Click HERE to send me a PM | Sales@jdpmotorsports.com | www.jdpmotorsports.com | 801-545-4215
JDP Sales is offline   Reply With Quote
Old 12-04-2014, 07:35 PM   #3
JDP Sales

 
JDP Sales's Avatar
 
Drives: Chevys at the limit
Join Date: Nov 2010
Location: SLC, UT
Posts: 10,603
Stocking stuffer sale! Check out the discount pricing on our site!

http://www.jdpmotorsports.com/catalo...neering+camaro

Best regards,

Tyler
888-308-6007
__________________

Click HERE to send me a PM | Sales@jdpmotorsports.com | www.jdpmotorsports.com | 801-545-4215
JDP Sales is offline   Reply With Quote
Old 12-04-2014, 10:23 PM   #4
Homer2

 
Homer2's Avatar
 
Drives: 50th Anni.. coming home 11/01
Join Date: Jul 2014
Location: Toronto. Ontario
Posts: 1,017
Triple Posted.. Triple deleted. Mannn

Mine got put in last night

Homer2 is offline   Reply With Quote
Old 12-11-2014, 07:58 PM   #5
JDP Sales

 
JDP Sales's Avatar
 
Drives: Chevys at the limit
Join Date: Nov 2010
Location: SLC, UT
Posts: 10,603
Clean install Homer2!

Best regards,

Tyler
888-308-6007
__________________

Click HERE to send me a PM | Sales@jdpmotorsports.com | www.jdpmotorsports.com | 801-545-4215
JDP Sales is offline   Reply With Quote
Old 01-13-2015, 07:57 AM   #6
Wacko37
 
Wacko37's Avatar
 
Drives: 2010 2SS/RS & 2007 2500HD D-Max
Join Date: Dec 2014
Location: NJ
Posts: 241
I have a basic LS3 with normal bolt ons and I was wondering what options I need or could use with the E2 can?
__________________
2010 Summit white SS/RS, Manzo full exhaust w/2" primaries, Roto-Fab intake, FE4 conversion, BMR 1.25" (rear)/1" (front) drop springs, BMR sways, BMR trailing arms, BMR toe links, sub-frame bushings, upper control arm bushings, Hawk slotted/ drilled rotors w/HPS 5.0 pads, Taylor wires, remote tuned by DynoSteve@RDP, various little lighting mods, ebay SLP splitter, Heritage grille, ZL1 rockers, MRR 228 wheels +43/+23 w/MT street comp 275/40/20-305/35/20

2007 2500HD Duramax, Built trans, custom tuned beast
Wacko37 is offline   Reply With Quote
Old 01-13-2015, 01:36 PM   #7
JDP Sales

 
JDP Sales's Avatar
 
Drives: Chevys at the limit
Join Date: Nov 2010
Location: SLC, UT
Posts: 10,603
Quote:
Originally Posted by Wacko37
I have a basic LS3 with normal bolt ons and I was wondering what options I need or could use with the E2 can?
You won't need any special options for your application. Just single exit and if you would like you can do AN fittings and/or braided lines.

You can go with either the standard can or the E2. The only real difference is the E2 is 30% larger so it has more capacity.

Feel free to call PM or email me anytime with questions.

Best regards,

Tyler
888-308-6007
__________________

Click HERE to send me a PM | Sales@jdpmotorsports.com | www.jdpmotorsports.com | 801-545-4215
JDP Sales is offline   Reply With Quote
Old 01-17-2015, 08:34 PM   #8
revived
Vrrrm.
 
revived's Avatar
 
Drives: 2011 2SS/RS LS3
Join Date: Jun 2013
Location: MA
Posts: 1,496
Do N/A cars require a check valve on the E2 cans?
__________________

revived is offline   Reply With Quote
Old 01-19-2015, 01:34 PM   #9
JDP Sales

 
JDP Sales's Avatar
 
Drives: Chevys at the limit
Join Date: Nov 2010
Location: SLC, UT
Posts: 10,603
Quote:
Originally Posted by revived
Do N/A cars require a check valve on the E2 cans?
Check valves and additional exit ports are only necessary on Turbo or Centrifugal supercharged applications. ZL1s, PD supercharged and N/A applications do not require Check valves or the additional exit port.

Please feel free to call, PM or email me anytime with questions.

Best regards,

Tyler
888-308-6007
__________________

Click HERE to send me a PM | Sales@jdpmotorsports.com | www.jdpmotorsports.com | 801-545-4215
JDP Sales is offline   Reply With Quote
Old 02-12-2015, 01:22 PM   #10
45thCAMARO 2SS/RS
xquest91x
 
45thCAMARO 2SS/RS's Avatar
 
Drives: 2012 45th Anniversary 2SS/RS
Join Date: Mar 2013
Location: Yuma, AZ
Posts: 537
Mine just arrived Tyler, thanks for the help! -Danny (yuma)
__________________
2012 45th Camaro 2SS/RS LS3
Driver Mod: Stage 5
Full Bolt-ons + Tune 418RWHP/420RWTQ
H/C + Bolt-ons + Tune 485RWHP/435RWTQ
Full BMR Stage 2&3 Suspension
3.91 1LE Gear Diff Swap
MGW Short Throw Shifter
45thCAMARO 2SS/RS is offline   Reply With Quote
Old 02-12-2015, 01:42 PM   #11
pyroguy

 
pyroguy's Avatar
 
Drives: ABM #824
Join Date: Apr 2013
Location: PA
Posts: 1,762
How much for a blue catch can for a L99 shipped to 17404? Let me know what type of options and corresponding pricing is available other than color please.
__________________
'10 Camaro 2SS/RS | Aqua Blue #824 of 3903 | Silver Stripes
Follow SCPA5 on Instagram! Follow SCPA5 on Facebook!
pyroguy is offline   Reply With Quote
Old 02-18-2015, 08:01 PM   #12
JDP Sales

 
JDP Sales's Avatar
 
Drives: Chevys at the limit
Join Date: Nov 2010
Location: SLC, UT
Posts: 10,603
All PM's and emails have been sent and replied to! Thanks for the orders and support! Let us know if you have any questions!

Best regards,

Tyler
888-308-6007
__________________

Click HERE to send me a PM | Sales@jdpmotorsports.com | www.jdpmotorsports.com | 801-545-4215
JDP Sales is offline   Reply With Quote
Old 03-04-2015, 01:10 AM   #13
RickG7P
 
RickG7P's Avatar
 
Drives: 2015 1SS RRM M6
Join Date: Dec 2014
Location: SoCal
Posts: 39
I'd like a quote for a standard black LS3 PCV catch can with standard options shipped to 91320 please
__________________
Options/Mods: Short Throw Shifter, NPP Exhaust w/Fuse Pull, 15% Tint, Vitesse Throttle Controller, BBK Cold Air Intake.
RickG7P is offline   Reply With Quote
Old 03-17-2015, 12:52 PM   #14
JDP Sales

 
JDP Sales's Avatar
 
Drives: Chevys at the limit
Join Date: Nov 2010
Location: SLC, UT
Posts: 10,603
Thanks for the orders Camaro5!!

Best regards,

Tyler
888-308-6007
__________________

Click HERE to send me a PM | Sales@jdpmotorsports.com | www.jdpmotorsports.com | 801-545-4215
JDP Sales is offline   Reply With Quote
 
Reply

Tags
best catch can, e2 catch can, elite catch can, elite engineering, jdp motorsports

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:57 PM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2017, vBulletin Solutions, Inc.