Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Cold Air Inductions
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Engine | Drivetrain | Powertrain Technical Discussions > Forced Induction - V6

Forced Induction - V6 V6 Supercharger, turbo, nitrous discussions

Reply
 
Thread Tools
Old 07-25-2013, 11:40 AM   #1
ksspeed
 
ksspeed's Avatar
 
Drives: 2013, Camaro 2LS (BRM)
Join Date: Jun 2013
Location: Eudora, Ks. 66025
Posts: 56
no answers on the first go round, window switch???

I am wanting to add a window switch to my NOS system , wasnt sure what brand or how yo connect for this. I currently have a jegs window switch, that allows for 4,6, or 8 cyl. Setup, however from what i understand, this will not work do to the signal is independent for each cylinder. Any ideas?
ksspeed is offline   Reply With Quote
Old 07-25-2013, 11:48 AM   #2
IneedAZ

 
IneedAZ's Avatar
 
Drives: not enough power
Join Date: Mar 2009
Location: Tampa
Posts: 1,534
i already went thru this myself 2 weeks ago...do as i did and return the window switch..you need the one by MSD#8969 or a brand that has 1 cylinder. I went with the MSD and it works just fine!
__________________
2012: Vmax TBody, CAI w/scoop, Solo HFC, ZL1 FP, Magnaflow TruX, Dynomax VT, RX catch can, HP Tune, BMR; Springs, Sways, Trailing Arms, Toe Ends, & Safety Loop, Koni str.t, Pioneer Z150bh, Phoenix Gold Sub, Hertz speakers & 5ch Amp, SS rear with 3.91 gears w/Eaton TrueTrac, and BMR bushings, Baer Decela Rotors, Goodridge brake lines, Brembo(GM) 4 piston calipers, Hawk Ceramic pads, and Vredestein Ultrac Sessanta Tires, Ny-Trex Nitrous, and more. 345RWHP/354lbsTQ 12.8@108
IneedAZ is offline   Reply With Quote
Old 07-25-2013, 11:52 AM   #3
ksspeed
 
ksspeed's Avatar
 
Drives: 2013, Camaro 2LS (BRM)
Join Date: Jun 2013
Location: Eudora, Ks. 66025
Posts: 56
Sweet, thats all i needed, thank you.
ksspeed is offline   Reply With Quote
Old 07-25-2013, 12:31 PM   #4
IneedAZ

 
IneedAZ's Avatar
 
Drives: not enough power
Join Date: Mar 2009
Location: Tampa
Posts: 1,534
no problem
__________________
2012: Vmax TBody, CAI w/scoop, Solo HFC, ZL1 FP, Magnaflow TruX, Dynomax VT, RX catch can, HP Tune, BMR; Springs, Sways, Trailing Arms, Toe Ends, & Safety Loop, Koni str.t, Pioneer Z150bh, Phoenix Gold Sub, Hertz speakers & 5ch Amp, SS rear with 3.91 gears w/Eaton TrueTrac, and BMR bushings, Baer Decela Rotors, Goodridge brake lines, Brembo(GM) 4 piston calipers, Hawk Ceramic pads, and Vredestein Ultrac Sessanta Tires, Ny-Trex Nitrous, and more. 345RWHP/354lbsTQ 12.8@108
IneedAZ is offline   Reply With Quote
Old 08-07-2013, 05:20 PM   #5
ksspeed
 
ksspeed's Avatar
 
Drives: 2013, Camaro 2LS (BRM)
Join Date: Jun 2013
Location: Eudora, Ks. 66025
Posts: 56
Im assuming cylinder one is where you tap the signal wire, and which wire is the correct one (what color)? Btw, i just got.the msd box today, thank you, big big help!
ksspeed is offline   Reply With Quote
Old 08-09-2013, 01:35 PM   #6
IneedAZ

 
IneedAZ's Avatar
 
Drives: not enough power
Join Date: Mar 2009
Location: Tampa
Posts: 1,534
did u get it finished?
__________________
2012: Vmax TBody, CAI w/scoop, Solo HFC, ZL1 FP, Magnaflow TruX, Dynomax VT, RX catch can, HP Tune, BMR; Springs, Sways, Trailing Arms, Toe Ends, & Safety Loop, Koni str.t, Pioneer Z150bh, Phoenix Gold Sub, Hertz speakers & 5ch Amp, SS rear with 3.91 gears w/Eaton TrueTrac, and BMR bushings, Baer Decela Rotors, Goodridge brake lines, Brembo(GM) 4 piston calipers, Hawk Ceramic pads, and Vredestein Ultrac Sessanta Tires, Ny-Trex Nitrous, and more. 345RWHP/354lbsTQ 12.8@108
IneedAZ is offline   Reply With Quote
Old 08-09-2013, 06:22 PM   #7
ksspeed
 
ksspeed's Avatar
 
Drives: 2013, Camaro 2LS (BRM)
Join Date: Jun 2013
Location: Eudora, Ks. 66025
Posts: 56
Yes i did, thank you so much. I actually did a little more expermenting of my own and found any cylinder works as long as its the third wire from the left on the harness. I have another post on here about it and a thanks again to you, but i didnt know if you wanted your name mentioned for the help.
ksspeed is offline   Reply With Quote
Old 08-09-2013, 07:44 PM   #8
IneedAZ

 
IneedAZ's Avatar
 
Drives: not enough power
Join Date: Mar 2009
Location: Tampa
Posts: 1,534
guess It makes sense any cylinder works since they are independent.
__________________
2012: Vmax TBody, CAI w/scoop, Solo HFC, ZL1 FP, Magnaflow TruX, Dynomax VT, RX catch can, HP Tune, BMR; Springs, Sways, Trailing Arms, Toe Ends, & Safety Loop, Koni str.t, Pioneer Z150bh, Phoenix Gold Sub, Hertz speakers & 5ch Amp, SS rear with 3.91 gears w/Eaton TrueTrac, and BMR bushings, Baer Decela Rotors, Goodridge brake lines, Brembo(GM) 4 piston calipers, Hawk Ceramic pads, and Vredestein Ultrac Sessanta Tires, Ny-Trex Nitrous, and more. 345RWHP/354lbsTQ 12.8@108
IneedAZ is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:31 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.