Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Anthony @ LG Motorsports
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Engine | Drivetrain | Powertrain Technical Discussions > Forced Induction - V6

Forced Induction - V6 V6 Supercharger, turbo, nitrous discussions

Reply
 
Thread Tools
Old 08-08-2013, 11:33 AM   #1
ksspeed
 
ksspeed's Avatar
 
Drives: 2013, Camaro 2LS (BRM)
Join Date: Jun 2013
Location: Eudora, Ks. 66025
Posts: 56
msd window switch connection question

Need help,on which cylinder and what wire (color) does the signal wire forthe window switch connect to?
ksspeed is offline   Reply With Quote
Old 08-08-2013, 07:27 PM   #2
ksspeed
 
ksspeed's Avatar
 
Drives: 2013, Camaro 2LS (BRM)
Join Date: Jun 2013
Location: Eudora, Ks. 66025
Posts: 56
... So here is the answer! I spoke with someone on the forum, unsure if he wanted his name mentioned, but i owe him a big thank you. For anyone installing an MSD 8969 window switch, or equivalent, the switch should be set for "1" cylinder. The signal wire will connect to the third wire from the left (on a LFX at least) This is a different color wire on each cylinder harness, and the only wire on each harness that changes color. I spliced into a couple of different coil wires (all on the third wire from left) and had proper signal.
ksspeed is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:44 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.