Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
sjm autoprod
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > General Camaro Forums > Sponsors Camaro Builds / Project Cars


Reply
 
Thread Tools
Old 12-23-2014, 12:50 AM   #1
Af247
Account Suspended
 
Drives: 2012 Matte Dark Grey V6
Join Date: Sep 2012
Location: SoCal
Posts: 31
New spoiler!!

I've designed and started modeling a new style of spoiler for the 5th gen camaro. It will be a 4 piece spoiler 1 main fiber glass piece and 3 attachable wickerbill like lips for a more aggressive race look (the wing will be wind tunnel tested later on to see if my calculations are correct and it's not just a show piece) the lips will be available in 3 different materials aluminum, carbon fiber and plexiglass for the center only! It's a mix between the anvil spoiler and 2015 z06 spoiler with little twist!!

ScarMotorsports spoiler 1 (MS1)
Attached Images
 
Af247 is offline   Reply With Quote
Old 12-23-2014, 07:35 AM   #2
Spartan01


 
Spartan01's Avatar
 
Drives: Evil Eva, 2010 2SS LS3
Join Date: Aug 2013
Location: Falls Church, Virginia
Posts: 3,619
I volunteer to test it out, you know, in real world conditions.

That looks awesome!
__________________
"You simply cannot trust quotes found on the internet." -Abraham Lincoln
Spartan01 is offline   Reply With Quote
Old 12-23-2014, 09:25 AM   #3
woodside783
Casey Woodside
 
woodside783's Avatar
 
Drives: a very fun car
Join Date: Jun 2010
Location: Tn
Posts: 1,870
I like it so far
__________________
Instagram @caseywoodside
http://youtu.be/CSc9aPh_X_w
woodside783 is offline   Reply With Quote
Old 12-23-2014, 09:42 AM   #4
Mean Green Z28

 
Drives: 2010 2SS
Join Date: Aug 2013
Location: Annapolis, MD
Posts: 912
looks good
__________________
2010 2SS - CAI Intake, ADM Scoop, RotoFab Washer relo. LT Headers and off-road pipes, X-pipe, Muffler Deletes, ZL1 Spoiler, Technostalgia Tail-lights
'98 T/A (Sold) - Forged 6.0ltr, MS3, P&P'd Heads/Valves, 90MM FAST/TB, Headers, 3" Y-pipe, 4" Mufflex Catback. Koni Adjustables w/GC coilovers (550/175), Strano Sway Bars
'94 Z28 (Sold) ... LS1 swap (basically same setup as the T/A), TH350/3500 stall ... swapped it all into the T/A
-- >> Some of my Projects My Fquick Page
Mean Green Z28 is online now   Reply With Quote
Old 07-09-2015, 12:57 AM   #5
OMEN
 
OMEN's Avatar
 
Drives: Camaro 2014 SS
Join Date: Mar 2014
Location: Oman
Posts: 142
amazing
OMEN is offline   Reply With Quote
Old 07-25-2015, 06:44 PM   #6
Splat
 
Drives: 2012 1SS M6 Inferno Orange
Join Date: Dec 2012
Location: New Rochelle New York
Posts: 624
What ever happened to this?
__________________
2012 1SS Camaro LS3 Inferno Orange
Mods: Long Tube ARH 1 7/8, ARH High Flow Cats, 3' Cat Back Magnaflow Exhaust, AEM Cold Air Intake, Elite Catch Can V2, GM 3.91 Gears, Hotchkis TVS Track Pack kit. Tuned by East Coast Supercharging 409 Hp 426 Tq

LSA Supercharger, ADM Supercharger kit, Cam, Axles, Monster Clutch, Squash Fuel System, BMR Bushing Kit.... For 2016.
Splat is offline   Reply With Quote
Old 07-25-2015, 09:38 PM   #7
rebelyell22
v1, rotate
 
rebelyell22's Avatar
 
Drives: 2011 SIM 2SS/RS LS3
Join Date: Sep 2013
Location: Tupelo, MS
Posts: 3,169
Quote:
Originally Posted by Splat View Post
What ever happened to this?
He got banned, because he isn't a vendor....
__________________
2011 2SS/RS built 8/24/10
rebelyell22 is online now   Reply With Quote
Old 07-30-2015, 08:05 PM   #8
Kleeeb

 
Kleeeb's Avatar
 
Drives: 2014 Red Hot 1LT/RS
Join Date: May 2013
Location: College Station, TX
Posts: 1,800
Send a message via MSN to Kleeeb Send a message via Skype™ to Kleeeb
isn't this alex_camaro on instagram? Their "brand" is called ADIX now.
__________________
Kleeeb is offline   Reply With Quote
Old 07-31-2015, 12:22 AM   #9
Dubscamaro
Living Life in MPH.
 
Dubscamaro's Avatar
 
Drives: 15 SW 2SS 1LE
Join Date: Dec 2013
Location: Arizona
Posts: 919
http://www.adixcustoms.com Could easily get cheaper spoiler even by going through Chevrolet..nice but 2.5k for a spoiler?
__________________
Dubscamaro is offline   Reply With Quote
Old 07-31-2015, 05:36 PM   #10
TommyTheCat
SLWMARO ☪
 
TommyTheCat's Avatar
 
Drives: 2013 Camaro
Join Date: May 2014
Location: SoCal
Posts: 2,583
hah i knew it read it before. He came back pretending to be an "interested buyer" in the spoiler, but it was just to promote his own company. The user name was scar motor sports, and lo and behold the name of the company in this OP. They changed names to ADIX and then he tried to advertise by pretending to be a potential buyer but wouldn't admit it...

Nobody really liked it, way too big and WAY too expensive for some clay modeling.

http://www.camaro5.com/forums/showthread.php?t=415365
TommyTheCat is offline   Reply With Quote
Old 08-02-2015, 05:26 PM   #11
PEW-PROFESSIONAL
 
PEW-PROFESSIONAL's Avatar
 
Drives: 2014 Chevy Camaro 2SS
Join Date: Sep 2014
Location: Atlanta, Georgia
Posts: 323
That spoiler has NO function, hell the race version looks like it would completely fall apart. Plus made from fiberglass, screw that, I can get a full carbon fiber spoiler that has more function that that ugly POS!
__________________
G5carbon.com-SS Carbon fiber Trunk Filler Panels**Carbon fiber Heat Extractor **Z/28 Carbon Fiber Spoiler (Comming Soon)**Z/28 Carbon Fiber Rear Defuser (Comming Soon)**SS Carbon Fiber Lower Grill (Coming Soon)**Z/28 Carbon fiber Side Skirts (Coming soon)**SS Carbon fiber Cooling Plate (Coming Soon)**Camber/Caster Plates (Coming Soon)
Westcoastcamaros.com-Carbon Fiber Engine Cover (Ordered)
PEW-PROFESSIONAL is offline   Reply With Quote
Old 08-04-2015, 07:43 AM   #12
Denis


 
Denis's Avatar
 
Drives: 2010 SS
Join Date: May 2012
Location: Lexington Park, MD
Posts: 7,051
2.5 grand? haha
__________________
Denis is offline   Reply With Quote
Old 08-04-2015, 09:37 AM   #13
CreativeDawn

 
CreativeDawn's Avatar
 
Drives: 2010 1LT
Join Date: Nov 2013
Location: USA
Posts: 1,094
I actually like the Spoiler but I can't afford that price! If it was 250, would fit in the holes of the Stock Spoiler holes.....I would buy it.
__________________
Support The Enviroment: Kill CARB!
CreativeDawn is offline   Reply With Quote
Old 08-04-2015, 11:18 AM   #14
BlackSmoke
 
BlackSmoke's Avatar
 
Drives: 2013 Black SS 1LE
Join Date: Jul 2013
Location: Tennessee
Posts: 192
Eh... I am just not feeling it at all. The rear just doesn't look good. The screw heads stands out like a sore thumb. Even if the price was really low it's just too big and again those heads from the back view. It's just not my taste and $2500 for a spoiler?

I give the guy credit for his creation and trying to get in the market category but other than that I just don't see it. He may do well with it who knows.
__________________
K & N Cold Air Intake, 25% window tint, 2 sets of 6000K LED fogs added, bow ties delete, Pypes catback mid exhaust, MGP Caliper covers, Spyder projection HID 6000K lighting with dual CCFL halos, Technostalgia Rapid Fire LED Tail Lights, blacked out rear bezels, Oracle Ghosted side marker lights, Platinum Ultra Rims, LED tag, dome, trunk lighting, Razzi Ground Effects and Eibach Pro Springs.
[SIGPIC][SIGPIC]
BlackSmoke is online now   Reply With Quote
Old 08-07-2015, 09:20 AM   #15
Vengeance Graphix


 
Vengeance Graphix's Avatar
 
Drives: 2010 IOM 2SS/RS
Join Date: May 2010
Location: Central NJ
Posts: 10,572
$2.5k??? That is crazy money for just a spoiler. You can get so many other performance upgrades with that kind of cash, Its pretty bulky too. Not feeling the overall design really. Looks like the anvil version mashed with a c7 z06 that gained weight
__________________
Vengeance Graphix is offline   Reply With Quote
Old 08-07-2015, 09:21 PM   #16
rebelyell22
v1, rotate
 
rebelyell22's Avatar
 
Drives: 2011 SIM 2SS/RS LS3
Join Date: Sep 2013
Location: Tupelo, MS
Posts: 3,169
way too big. I want a spoiler on my car, not a slide
__________________
2011 2SS/RS built 8/24/10
rebelyell22 is online now   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:29 PM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2015, vBulletin Solutions, Inc.